历史街区街道界面景观要素及保护策略研究——以青岛鱼山历史文化街区为例

指出了历史文化街区是人类文明的“活化石”,是人类历史文化遗迹和日常生活的重要空间载体。历史文化街区的街道景观是街道展示景观的主要载体,通过对街道界面景观要素的提取、归纳与总结,得出街道界面景观要素由底界面、侧界面以及顶界面三大核心要素组成,并将其应用到鱼山历史文化街区街道景观内进行了分析研究,提出了一些保护策略。旨在进一步了解历史文化街区街道界面景观要素构成,为历史文化街区景观的保护提供更加清晰的思路。     

From borders to ecotones – Private-public co-management of urban woodland edges bordering private housing

This paper conceptualises and evaluates so-called co-management zones as an approach for user participation in urban forestry, specifically in the management of public woodland edges bordering residential areas. Co-management zones can metaphorically be viewed as ‘ecotone-like’ spaces, i.e. zones where overlapping interest – in this case residents’ and municipal authorities’ – can be used to create richness and meetings rather than boundaries. Building on the perspectives of ecotone thinking and governance arrangements, co-management zones in the Danish residential area of Sletten in Holstebro were evaluated. The presented case study combined interviews with residents and interviews with three key green space professionals who had led the planning, design, establishment and management of the woodland and the implementation of co-management. The resident participation in the co-management zone was also assessed and photo documented in a field survey, categorising individual households according to type and degree of physical signs of participation. Findings illustrate the potential of co-management zones to initiate collaboration between residents and public woodland managers in creating recreationally valuable and varied meetings between private gardens and urban woodlands. Challenges with establishing co-management zones were also highlighted, especially the need for clear guidelines and continuous communication between residents and the municipality. Perspectives and implications related to residents, managers and green space quality are discussed.     

黄土高原陡坡土坎植被根-土复合体抗剪强度研究

以黄土高原陡坡土坎6种典型植物群落类型为研究对象，在分析植被根系密度指标的基础上，通过直剪试验，探讨不同植物群落的根-土复合体抗剪强度以及根系对提高抗剪强度的作用。结果表明:1）6种群落的根系密度指标值均具有显著性差异，白刺花-铁杆蒿群落的根重密度、根长密度和根表面积密度在所有群落类型中均为最高，分别为2 757.07 g/m³、17 886.22 m/m³和16.96 m²/m³；2）6种群落之间的根-土复合体的抗剪强度均显著高于素土抗剪强度，其中白刺花-铁杆蒿群落相对于素土的抗剪强度增加值最大，为32.98 kPa，且抗剪强度增加值随土层深度增加而降低；3）根-土复合体抗剪强度相对于素土抗剪强度的增加值与根系密度指标值呈对数函数关系，随根系含量增加而升高。     

薄膜扩散梯度（DGT）技术在环境微界面物质运移过程研究中的应用

土壤、沉积物、水体和生物体之间的接触和作用形成了多种环境微界面。这些环境微界面是物质迁移转化的重要场所,而高度时空异质性的界面特征使得对其中化学反应信息的捕捉变得极其复杂且困难。薄膜梯度扩散(DGT)技术以其原位测量元素生物有效态和高空间分辨率等优势,适用于研究化学异质性的界面过程。本文系统总结了DGT技术在环境微界面的物质运移过程研究中的应用现状,包括以下3方面内容:一是一维物质浓度测定;二是二维化学分布成像;三是与薄膜扩散平衡技术(DET)、平衡式孔隙水采样器(Peeper)和平面光极(PO)等技术联用同步获取多种溶质分布信息。现有研究证据表明,DGT适合在亚毫米(几十至几百微米)至毫米尺度研究环境微界面营养盐和污染物运移的生物地球化学过程,并可与其他化学成像技术结合研究物质跨界面运移的驱动因子和动力学特征。最后,在DGT技术发展与应用场景扩展等方面提出了几点展望。     

真空复合轧制自磨锐割刀与其结合界面组织性能研究

采用真空复合轧制工艺，将3种钢板（GCr15、Q420、IF）轧制成梯度复合材料，对其结合界面处的微观组织、成分及硬度分布、抗剪强度进行了检测，并对梯度材料自磨锐割刀进行了田间试验。结果表明，不同板层界面处材料间相互咬合形成较为紊乱的冶金结合方式，界面处元素相互扩散形成过渡区，组织缺陷较少。结合界面处的抗剪强度均超过了国标要求，且断裂方式为韧性断裂，不同界面间存在较为平缓的硬度梯度变化。梯度材料自磨锐割刀后刀面、刀尖及刃口材料为GCr15钢，硬度高、耐磨性好，前刀面的硬度呈梯度变化，磨损均匀，作业过程中可始终保持刀尖前凸，刃口曲率半径变化较小，能够长时间保持刃口的锋锐性与再生作物的低损伤切割。田间试验结果表明，相同作业条件下，梯度材料自磨锐割刀耐磨性是市售割刀的3倍以上。     

Changes in soil and water quality at sediment–water interface of Penaeus vannamei culture pond at varying salinities

The health of the pond environment in shrimp farming is important for sustainable and profitable aquaculture, in which sediment–water interface is the most important influencing area. With this objective, the key parameters of water and sediment at the interface was studied in shrimp ponds with varying salinities and compared with the surface water and soil to understand the variations and the underlying causes. Total ammonia nitrogen and total alkalinity were higher in water at the interface as compared to surface water, whereas pH, nitrite, oxide forms of nitrogen (NO₃), phosphorus (PO₄) and oxidizing bacteria were observed to be lower. There was no significant difference with respect to macrominerals such as sodium, potassium, calcium and magnesium between water at the interface and surface. These changes are profoundly influenced by the uppermost 1.0‐cm thick sediment layer, where the maximum transition of nutrients takes place with the water column. The outcome of the study highlights the effectiveness of water sampling for metabolites at the interface, which reflects at an early stage any potential deterioration of pond environment, which will help the farmer to initiate timely mitigation measures.     

多功能园林机械快速接口技术的研究

通过对加工中心刀具布局及多功能车整体布局的分析,提出了可行的作业头布局方式.结合作业头布局特点,分析了快速接口的设计要求,提出了可行的快速接口结构形式.     

林木根系与黄土复合体的三轴试验

以林木根系为研究对象,将根系与土壤视为一个整体,用三轴压缩试验方法研究根土复合体的应力-应变及强度特性,探讨不同根系直径、根系分布方式、复合体含水量和围压下的极限主应力差和加根效果,得出根土复合体的强度指标.结果表明:根土复合体在含水量相同的情况下,随根径增大,复合体的强度提高率增大.水平根的根土复合体随含水量增加,复合体的强度提高率减小;垂直根和复合根的复合体随含水量增加,复合体的强度提高率增大.垂直根和复合根的根土复合体能明显提高土体的强度,水平根的根土复合体对于提高土体强度效果不是很明显.     

木质纤维/塑料复合材料的发展现状及应用

木质纤维/塑料复合材料是以木质纤维材料为基本体,与塑料通过不同的复合途径制成的一种新型复合材料,综合了木质纤维与塑料的性能特点,因而用途广泛.作者介绍了木质纤维/塑料复合材料的复合工艺、界面特性和改性处理以及产品的应用前景.     

基于Pro/E与ADAMS蜗轮蜗杆传动仿真研究

论述了基于Pro/E与ADAMS的蜗轮蜗杆设计及动态仿真的方法和过程,介绍了Parasolid文件接口的使用以及ADAMS齿轮副中啮合点的创建方法,对仿真结果和理论计算结果进行了对比.