贵州碾茶茶园覆网方式浅析

贵州碾茶茶园覆网方式主要有直接覆盖、隧道式覆盖和大棚覆盖3种,其中直接覆盖成本最低,用工最少,操作简单,但容易使蓬面芽叶受损或被灼伤,芽叶产量相对偏低且品质有所下降;大棚覆盖成本最高,用工最多,操作复杂,但蓬面芽叶较完整,受损小,产量较高,芽叶品质有所提高;隧道式覆盖一次性投入比大棚覆盖少,但实际操作时用工较多,芽叶品质则位于前两者之间。     

Wide hybridization and introgression breeding in safflower: Effectiveness of different selection methods

Possibility of using interspecific hybridization to increase genetic diversity of drought tolerance in safflower (Carthamus tinctorius L.) and effectiveness of different selection methods is poorly understood. The main objectives of this study were to evaluate the effectiveness of (a) interspecific hybridization to expand genetic diversity in safflower for agronomic traits and drought tolerance in advance generations and (b) different selection methods (direct vs. indirect) for improving seed yield. Interspecific hybridizations were performed between species of C. tinctorius × C. palaestinus (TP), C. palaestinus × C. oxyacantha (PO) and C. tinctorius × C. oxyacantha (TO). Based on the field screening of genotypes in F3 generation, four groups of selected genotypes (derived from combination of direct and indirect selection under both drought and normal environments along with selection based on drought tolerance index (STI)) were evaluated in F4 and F5 generations. Indirect selection for seed yield was significantly more efficient than direct selection. Selection in stress environment resulted to more efficiency than selection in normal environment. No significant difference was observed between direct selection and selection based on STI. The result showed that TP was the best population to combine high seed yield and drought tolerance in safflower.     

Marker‐assisted breeding for improvement of anaerobic germination in japonica rice (Oryza sativa)

Direct seeding is increasingly being practiced in rice cultivation areas because it saves labour and reduces cost of production and management. In this study, four japonica‐type breeding lines were developed from a cross of a japonica cultivar and an AG‐tolerant donor, KHO, using marker‐assisted selection. Validation of the target genes AG1 and AG2 in the selected lines was examined by PCR analysis and the background recovery rate by the recurrent parent was confirmed by genotyping using a 6K SNP chip. Compared to the recurrent, the survival rates of the selected lines were improved in a range from 33% to 115% in three conditions; in particular, the survival rate was increased in more than twice that of the recurrent parent under the hypoxic condition. The main agronomic trait, yield and quality‐related traits were similar to those of the recurrent parent. The use of these lines will contribute to the expansion of the cultivation area due to the proven economic benefits of direct seeding in Korea.     

插装阀阀芯优化与仿真分析

插装阀在静止状态下，由于静摩擦的原因，导致阀芯与阀套出现卡滞现象；在运动状态下，由于压差和阀芯微偏移的原因造成阀芯与阀套发生磨损；为此提出一种新型的带有导流槽的插装阀阀芯。基于缝隙流动和液压卡紧分析，建立插装阀阀芯与阀套间隙的CFD优化仿真模型，通过N-S方程、伯努利方程和卡紧力方程联立得到阀芯与阀套间卡紧力的推导公式。基于CFD仿真模拟分析，比较新型阀芯与原阀芯不同模型间隙的切线应力、压力分布规律，结果表明：在入口压力为12 MPa时，原阀芯的切线应力在12 000 Pa上下波动，大于新型阀芯切线应力4 200 Pa；在入口压力为8 MPa时，原阀芯的切线应力在7 200 Pa上下波动，大于新型阀芯切线应力3 000 Pa；且原阀芯切线应力的波动范围远大于新型阀芯。新型阀芯在阀套间的受力更加平稳，磨损更小。研究结果为插装阀优化以及减少能量损失和改善润滑条件提供理论指导和依据。     

高压直流接地极对埋地管道腐蚀的影响和管控思考

高压直流输电、油气长输管道建设促进了全国范围内的能源优化配置,但高压直流接地极放电对埋地管道的强直流干扰问题应该引起足够关注。为进一步加强相关风险管控,回顾中国高压直流输电网的发展历程,对高压直流接地极放电影响管道的典型特点进行分析,结合当前实际提出后续风险管控的发展方向。研究结果表明:邻近油气长输管道路由的高压直流输电线路和接地极对管道的影响具有干扰时间不确定、干扰机理复杂、干扰程度大及缓解困难的特点,是管道当前面临的突出安全风险。高压直流输电网调试或故障运行过程中,接地极单极放电会加速管道腐蚀。后续应从加强沟通协调和联合测试,深化腐蚀机理和规律研究,采取综合治理措施等方面提升检测、研究及治理水平,全方位保障国家能源通道的安全稳定。     

Most fish destined for fishmeal production are food‐grade fish

Marine fisheries target and catch fish both for direct human consumption (DHC) as well as for fishmeal and fish oil, and other products. We derived the fractions used for each for 1950–2010 by fishing country, and thus provide a factual foundation for discussions of the optimal use of fisheries resources. From 1950 to 2010, 27% (~20 million tonnes annually) of globally reconstructed marine fisheries landings were destined for uses other than DHC. Importantly, 90% of fish destined for uses other than DHC are food‐grade or prime food‐grade fish, while fish without a ready market for DHC make up a much smaller proportion. These findings have implications for how we are using fish to feed ourselves or, more appropriately, how we are not using fish to feed ourselves.     

High fluid shear strain causes injury in silver shark: Preliminary implications for Mekong hydropower turbine design

The Lower Mekong Basin is facing unprecedented threats to fish diversity from hydropower development. There is increasing pressure on developers and construction authorities to design solutions to improve fish survival through turbines, thus protecting the resources in regions being developed for hydropower. A hydraulic characteristic of hydropower turbines with known fisheries impacts is fluid shear stress. Elevated shear stress occurs where rapidly flowing water passes near spillways, screens and within turbine draft tubes. Shear stress can have adverse impacts on fish, but no work has assessed whether this holds true for Mekong River species. A flume was used to determine critical tolerances of silver shark, Balantiocheilos melanopterus (Bleeker), to shear stress rates at a high‐velocity jet which simulated a hydropower turbine. Fish were assessed for injury or mortality following exposure. Results were compared against a no‐shear control. Injury and mortality were greater at higher shear stress exposures. Injuries occurred at all shear exposure levels with mortality at shear levels higher than 600/s. This approach should help design future hydropower turbines if data on other species demonstrate similar results. If the likelihood of adverse impact is high, then shear stress will need to be considered in the design of future hydropower facilities.     

施氮量对油后直播棉花产量、品质及生物量的影响

为研究施氮量对油后直播棉花生物量累积特征及其与产量、品质的关系,于2016-2017年在湖南常德设置了施氮量分别为0、90、180、270、360 kg·hm^-2氮肥水平试验。结果表明,在施氮量为0~360 kg·hm^-2范围内,施氮量越大棉株营养器官生物量累积越多,而棉株生殖器官生物量则在施氮量为270 kg·hm^-2时累积最多;皮棉产量、成铃数和单铃重均在施氮量为270 kg·hm^-2时达到最大;0~270 kg·hm^-2范围内,衣分随施氮量增加而增加。在施氮量为270 kg·hm^-2条件下,纤维长度和断裂比强度最高;适宜施氮量有利于纤维长度、断裂比强度的提高和马克隆值的优化,对伸长率和整齐度基本无影响。综上所述,适宜施氮量可提高棉花的产量、品质,洞庭湖棉区适宜的施氮量为180~250 kg·hm^-2。本研究结果为环洞庭湖棉区的氮肥合理运筹提供了技术参考。     

基于振动的土壤挖掘阻力与耗能特性试验研究

为了研究振动频率、振动方向等参数对振动式土壤挖掘降阻特性和耗能特性的影响，设计开发了振动式土壤挖掘阻力试验台。经理论分析、计算确定了振动挖掘机构运动参数。在土壤平均相对湿度为27%、平均土壤坚实度为2.2MPa条件的室内土槽系统中，在挖掘深度150mm、前进速度0.15~1.00m/s、振动频率2~20Hz的因素条件下，利用该试验台开展了土壤振动挖掘阻力和耗能特性试验研究。结果表明，振动式土壤挖掘能够有效降低工作阻力，其降阻率先随着振动频率增大而增大，在2~20Hz频率段，前后方向振动和垂向振动振幅分别为13mm和10mm时，其最大降阻率分别可达到21%和25%。降阻率在10~14Hz后增长速度变缓，表明该区间处于土壤的自振频率区间。前后方向振动下土壤挖掘降阻率和振动速度与前进速度的比值有关，当振动速度小于前进速度时，降阻率比较小，随着振动频率增加而缓慢增大；当振动速度大于前进速度后，在对应的频率点其降阻率会迅速上升，之后增长速度逐渐变缓。由于需要额外激振能量输入，两种振动方向的强迫振动式土壤挖掘综合耗能并不减少，在振动频率低于10Hz下，耗能比范围在1~1.07，但超过10Hz后，耗能比会随着振动频率增大以较快速度增加。振幅的增大能够使土壤挖掘阻力获得一定的降低，但同时振动挖掘耗能有较大的增加。