基于Hertz接触理论的黑水虻幼虫碰撞恢复系数测定

为建立黑水虻幼虫与收集、输送、分离等机械工作部件间发生碰撞时的碰撞模型，基于黑水虻幼虫生物特性，应用Hertz弹性碰撞理论推导了黑水虻幼虫碰撞过程动力学方程，结合运动学方程原理构建了黑水虻幼虫恢复系数的测定装置并进行了黑水虻幼虫恢复系数测定试验。试验针对第5龄期的黑水虻幼虫，采用L16(44×23)混合正交试验方案研究了碰撞材料、材料厚度、下落高度、碰撞角、跌落方向、含水率等因素对黑水虻幼虫恢复系数的影响，然后对碰撞材料、材料厚度、下落高度、碰撞角、跌落方向进行单因素试验，并获得了材料厚度、下落高度、碰撞角对恢复系数的影响规律与回归方程，且方程的决定系数均不小于0.9427。试验结果表明，影响黑水虻幼虫恢复系数的因素影响由大到小为：碰撞材料、下落高度、碰撞角、跌落方向、碰撞材料厚度、含水率，其中含水率对恢复系数影响不显著。单因素试验结果可得：黑水虻幼虫与Q235钢、铝合金、有机玻璃、橡胶等碰撞材料间的恢复系数依次降低，随下落高度的增大而逐渐减小，随材料厚度的增加而逐渐增大，恢复系数随碰撞角的增大而整体呈增大趋势，且横向跌落方向大于纵向跌落方向。该文研究结果可为黑水虻幼虫收集、输送、分离等机械相关工作部件优化设计提供参考依据。     

小麦山农4143抗黑胚病遗传分析及抗性遗传位点检测

 黑胚病是小麦生产的重要籽粒病害,麦根腐平脐蠕孢(Bipolaris sorokiniana)是黑胚病的主要致病菌。为分析小麦抗黑胚病遗传规律并检测抗性位点,本研究以抗黑胚病小麦品系山农4143与感病品系宛原白1号的F₇代重组自交系(RIL)群体为材料,于2018~2019年在3个试验点种植,采用“孢子液喷洒、套袋保湿”的方法进行接菌鉴定,用“主基因＋多基因混合遗传模型”进行遗传分析,并挑选极端抗、感自交系构建混池、结合小麦660K SNP芯片进行混合分组分析(BSA)。研究结果显示小麦品系山农4143对黑胚病抗性符合“4对主基因加性-上位性遗传模型”,主基因遗传力为0.88~0.95;通过BSA检测到黑胚病抗性位点36个,分别位于1A、2B(6)、2D(2)、3A、3B(2)、3D、4A(6)、4D、5A(4)、5B(6)、5D(3)、7A、7B和7D共14条染色体上,A、B、D染色组上分别为13、 15和8个,36个位点中有18个为抗黑胚病新鉴定位点。本研究结果为小麦抗黑胚病位点的精细定位和抗性育种中分子标记的开发奠定了基础。     

基于PhotoScan的径流小区三维重建参数优化

提高径流小区数字地面模型精度是应用三维重建技术研究面蚀细沟间与细沟侵蚀过程的关键。以位于黑龙江省海伦市的中国科学院海伦水土保持监测研究站的裸地小区为研究对象，以验证点与控制点误差比和数字高程模型（Digital elevation model，DEM）误差为指标，优化Agisoft PhotoScan三维重建径流小区的处理参数，降低DEM误差。PhotoScan的精度参数和相机模型设置对DEM误差有较大影响。优化后的验证点与控制点误差比降低35%，改善了径流小区DEM对地面控制点的过度拟合。优化后的相机模型包含焦距、像主点、径向畸变、切向畸变等。基于单点和点云的验证结果表明，优化过程误差降低约40%。相对于默认参数设置下的验证点误差（20.0mm），优化后的验证点误差为11.0mm，与细沟侵蚀深度标准相当（沟深大于等于10mm），因此优化后的径流小区三维重建过程更适宜于细沟侵蚀过程的三维表达。     

核桃细菌性黑斑病杀菌剂筛选及药效研究

本文以黄单胞杆菌Xanthomonas campestris pv.juglandis(Pierce Dowson)为供试菌株,选用不同浓度的13种杀菌剂进行室内毒力测定。结果表明:有10种药剂对该菌有一定的抑制效果,但只有5种杀菌剂能够产生明显的抑菌圈。其中,四霉素和链霉素的抑菌效果最强,最低抑菌浓度为0.165、3μg/mL,抑菌率为74.76%、69.23%,EC_(50)为12.764、35.318μg/mL。其他依次为乙蒜素、中生菌素和春雷霉素。选用这5种杀菌剂进行盆栽防治试验,四霉素和链霉素的平均防效达74.60%、71.69%,乙蒜素和中生菌素防效分别为65.98%、58.40%,春雷霉素防效最低为39.38%。其结果与室内基本一致。室内试验及盆栽试验结果表明四霉素、链霉素、乙蒜素、中生菌素和春雷霉素可作为防治核桃黑斑病的杀菌剂,其中四霉素为首选杀菌剂。     

农杆菌介导大麦无筛选标记转基因植株的获得

【目的】目前,国内外大麦遗传转化主要利用Golden Promise品种,基因依赖性严重,尤其是大麦的转化效率较低,并且获得安全型转基因大麦植株对其进一步产业化非常重要。建立高效、无筛选标记大麦遗传转化体系,拓展大麦遗传转化的受体基因型,为大麦基因功能解析和大麦转基因育种及商业化种植提供技术保障。【方法】以优良大麦品种Vlamingh为受体,取开花授粉后14 d左右的幼胚为转化材料,通过对培养基成分及培养步骤优化,建立农杆菌介导的高效遗传转化体系,并利用该体系将Bar和GUS在不同T-DNA区段的双T-DNA表达载体pWMB123转化大麦,获得候选转基因植株,然后利用PCR、Bar试纸条、组织化学染色和Southern blot等检测方法,在T₁代转基因植株中成功获得无筛选标记大麦转基因植株。【结果】在愈伤组织分化阶段,发现培养基中添加1.0 mg·L^-1 KT、0.5 mg·L^-1 6-BA和0.05 mg·L^-1 NAA明显促进愈伤组织分化。在转基因植株生根阶段,发现采用添加1.0 mg·L^-1的IBA的SM1（无其他生长素）的生根效果最佳,培养基中添加2.5 mg·L^-1 CuSO₄显著降低了大麦转基因植株白化现象。共转化了138个幼胚,最终获得14株大麦转基因植株,转化效率10.14%。PCR、Bar试纸条、GUS染色等检测证实,T₀代转基因植株中均含有Bar,而仅有10株含有GUS,2个T-DNA的共转化效率为71.43%。选取4个同时含有Bar和GUS的转基因植株,对其自交后代进行检测,在BL8株系中筛选到2株只含GUS而不含Bar的转基因植株,无筛选标记效率为6.9%。在T₁代转基因植株中对Bar和GUS进行了Southern blot鉴定,发现在多数转基因植株中Bar和GUS均为多拷贝整合,进一步证实BL8-15和BL8-19为无筛选标记的转基因植株。【结论】利用大麦品种Vlamingh为转化材料可以较高效率获得转基因植株,提高愈伤组织分化效率和转基因植株生根效率,降低转基因植株白化现象。利用农杆菌介导双T-DNA表达载体转化大麦,成功获得了无筛选标记转基因植株。     

施肥对春青稞干物质积累、分配及产量的影响

为研究施肥对青稞干物质积累、分配及产量的调节作用,以‘藏青27’、‘QTB13’和‘QTB25’为试验材料,比较分析不同施肥处理下干物质积累、分配及产量的变化规律。结果表明：增加施肥量促进青稞分蘖期—成熟期的干物质积累及开花期和成熟期干物质向营养器官和籽粒的分配,提高了花前营养器官贮藏同化物转运量及对籽粒贡献率,降低了花后同化物输入籽粒量对籽粒贡献率。‘QTB13’和‘QTB25’在F₂条件下,更有利于干物质积累及向营养器官和穗部的分配,花后同化物输入籽粒量最大,产量也最大。‘藏青27’在F₃条件下,更有利于干物质积累及向营养器官和穗部的分配,花后同化物输入籽粒量和对籽粒贡献率最大,产量也最大。说明合理施肥有利于青稞干物质积累分配及产量提高。     

Three SNPs within exons of INHA and ACVR2B genes are significantly associated with litter size in Dazu black goats

The aim of this study was to analyse the association between single-nucleotide polymorphisms within INHA and ACVR2B and litter size in Dazu black goats. In total, twenty-two SNPs were genotyped in 190 individuals by SNaPshot and resequencing. The results showed that three SNPs (SNP_1, SNP_12 and SNP_13 in this study) were detected to have significant additive genetic effect on the recorded goat litter size (p < .05). The SNP_1 (NC_030809.1), a non-synonymous substitution of G for T at chr2-g. 28314990 in the exon 2 of INHA gene (NM_001285606.1), resulted in homozygote 2 (HOM2) contributed 0.25 and heterozygote (HET) contributed 0.12 larger litter than homozygote 1 (HOM1). Meanwhile, SNP_12 (Chr22-g. 11721225 A > T) and SNP_13 (Chr22-g. 11721227 A > C) (NC_030829.1) simultaneously mutated at the first and third position of a triplet AAA (lysine, K) in the exon 4 of ACVR2B gene (XM_018066623.1) had estimated genetic effects of HOM1 (0.00) and HOM2 (0.03) larger than HET (−0.12). In conclusion, one SNPs (chr2-g. 28314990 T > G) within the exon 2 of INHA and two SNPs (Chr22-g. 11721225 A > T and Chr22-g. 11721227 A > C) i n the exon 4 of ACVR2B gene were highly recommended as candidate markers of litter size in Dazu black goats. A large-scale association study to assess the impact of these variants on litter size is still necessary.     

Transport of cadmium from soil to grain in cereal crops: A review

Due to rapid urbanization and industrialization, many soils for crop production are contaminated by cadmium(Cd), a heavy metal highly toxic to many organisms. Cereal crops such as rice, wheat, maize, and barley are the primary dietary source of Cd for humans, and reducing Cd transfer from soil to their grains is therefore an important issue for food safety. During the last decade, great progress has been made in elucidating the molecular mechanisms of Cd transport, particularly in rice. Inter-and intraspecific variations in Cd accumulation have been observed in cereal crops. Transporters for Cd have been identified in rice and other cereal crops using genotypic differences in Cd accumulation and mutant approaches. These transporters belong to different transporter families and are involved in the uptake, vacuolar sequestration, root-to-shoot translocation, and distribution of Cd. Attempts have been made to reduce Cd accumulation in grains by manipulating these transporters through overexpression or knockout of the transporter genes, as well as through marker-assisted selection breeding based on genotypic differences in Cd accumulation in the grains. In this review, we describe recent progress on molecular mechanisms of Cd accumulation in cereal crops and compare different molecular strategies for minimizing Cd accumulation in grains.     

山下黑猪与鲁莱黑猪正反交F1代杂种优势的估计

旨在估计山下黑猪和鲁莱黑猪正反交F₁代杂种优势，筛选出合适的杂交方式，以提高优质肉猪的生产效率，满足人们对于优质猪肉的需求。本研究在山下黑猪（164头）和鲁莱黑猪（69头）及其正（6头山下黑猪♂×25头鲁莱黑猪♀）、反（3头鲁莱黑猪♂×35头山下黑猪♀）交4个群体中测定了生长肥育、体尺外貌（75～110 kg）、繁殖和胴体肉质（90～115 kg）4大类共43个性状，比较了这些性状在群体间的差异，并估计了正反交F₁代的杂种优势。结果表明，山下黑猪的生长肥育和体尺性状较好，鲁莱黑猪的繁殖和肉质性状较好，正反交群体介于它们之间。正交群体的繁殖性能优于反交群体，但生长肥育性能比反交差。由于这4个群体的母猪都是纯种，因此繁殖性状没有表现出明显杂种优势。除膘厚、胸椎数、45 min pH和剪切力无显著的杂种优劣势外，大部分胴体性状和肉质性状有明显的杂种劣势。生长肥育性状的杂种优势在正反交群体中的表现不一致，反交群体表现出显著杂种优势，而正交则无明显的杂种优势。本研究估计了山下黑猪和鲁莱黑猪正反交的杂种优势，为筛选山下黑猪和鲁莱黑猪的最佳杂交方式奠定基础。     

Effects of commercial thinning,log position in the stem,and cutting width on the surface quality of cants produced by a chipper-canter

Fifteen stems of jack pine (Pinus banksiana Lamb.) of 3 commercial thinned plots (control, moderate, and intensive thinning) and 15 stems of black spruce (Picea mariana (Mill.) B.S.P), both coming from the Abitibi-Témiscamingue region – Canada, were cross-cut into three 2.4?m length sections: bottom, middle, and top logs. Logs were processed with a chipper-canter at three cutting widths (12.7, 19.1, and 25.4?mm), producing chips and a three-faced cant. The middle section of the cant was used to evaluate surface quality across the grain on each face. Roughness and waviness parameters and depth of torn grain were recorded. Knot characteristics were assessed in the three cant faces. Poorer surface quality was found in the lower part compared to the upper part of the cant for both species. At larger cutting widths, jack pine logs coming from a natural stand showed lower surface quality compared to logs from thinned stands. Black spruce waviness increased with the cutting width and stem height. These results were attributed to the increase of forces and vibration when cutting at larger cutting widths, which was worsened by the presence of bigger, more numerous knots at the control plot and in the top logs. Black spruce had deeper torn grain compared to jack pine. Their differences in knot characteristics resulted in a maximum torn grain depth favored by the presence of more knots rather than by bigger knot size. Other knot characteristics, such as the position of the knots in the cant face, the insertion angle of the branch and the distribution of the knots around the log, should be studied to better understand the relationship between torn grain formation and knottiness.