北京市蔬菜专业村产业集聚测度实证研究

以北京蔬菜专业村为研究对象,选取2012—2018年北京蔬菜专业村及蔬菜产业相关数据,运用区位商指数测算方法,从时间和空间两个层面对北京市蔬菜专业村产业集聚度进行测算;运用集中度指数测算方法,从专业村主导产业总产值和从业农户数两方面对集聚度进行测算。结果显示,北京市蔬菜专业村出现了集聚现象,但存在不稳定上下波动的问题,顺义区、通州区和平谷区总体集聚程度较高,并保持稳定集聚状态,集聚区域主要集中在顺义区和房山区。研究建议完善蔬菜专业村基础设施建设,打造蔬菜专业村区域品牌效应,发挥蔬菜示范村辐射带动作用,推进专业镇、基地及园区建设。     

Effect of soil pore size distribution on plant-available water and least limiting water range as soil physical quality indicators

Soil pore size distribution(SPSD) is one of the most important soil physical properties. This research investigated the relationships of location and shape parameters of the SPSD curves with plant-available water(PAW) and least limiting water range(LLWR) of the light-textured soils at the Torogh Agricultural Research Station in north-eastern Iran. Soil moisture release curve(SMRC), PAW and LLWR in matric heads of 100 and 330 h Pa for the field capacity and location and shape parameters of the SPSD curves of 30 soils with different texture and organic carbon contents were determined, and the variable relationships were statistically analyzed. The results showed that the median equivalent pore diameter(de), mean de, standard deviation(SD*), and skewness of the SPSD curves were significantly correlated with PAW(PAW330) and LLWR(LLWR330) measured in a matric head of 330 h Pa. Decrease in deand increase in the diversity of soil pore size(SD*) increased PAW330 and LLWR330. The SD* values of all the soil samples were lower than the optimal ranges suggested in literature. Neither PAW nor LLWR values were significantly different in the soils with the optimal modal deand those with non-optimal modal de. Optimal values of median and mean equivalent pore diameters and kurtosis of SPSD curves led to a significant improvement of PAW330 and LLWR330 as soil physical quality indicators. It was recommended to revise the optimal ranges for SD* and modal defor future studies.     

沈阳铁西区装备制造产业聚集实证分析

铁西区通过打造装备制造业产业聚集区。形成了高档数控机床、通用石化装备等六大主导产业以及电气及新能源等五大千亿产业集群，成为我国老工业基地振兴的区域典范。介绍铁西装备制造业聚集区发展现状，采用区位熵法测算沈阳装备制造业的产业集中度，对全市装备制造业的现状及问题进行分析，得出相应结论。     

玉米轴色突变体698-3R的遗传鉴定

以辐射诱变获得的玉米红轴突变体698-3R为材料,通过遗传交配设计分析轴色的遗传规律,利用SSR-BSA法初步定位轴色基因,并对候选基因进行克隆和表达分析。结果表明:(1)突变体698-3R的红轴对白轴性状表现为显性遗传,受一对核基因控制,初步定位在第一染色体上的SSR标记phi095与umc1452之间,与phi095相距3.9cM,与umc1452相距7.1cM,将该基因暂定名为C(t);(2)以轴色基因 P1的cDNA为模板克隆C(t),发现698-3R有3个C(t)转录本,而野生型698-3中至少有2个;预测氨基酸序列比对发现,698-3R中3个C(t)蛋白的氨基酸序列与已知P_1-wr蛋白一致,突变使其获得完整的MYB结构域和酸性激活域,而野生型698-3中698-3-P-1蛋白由于编码序列缺失导致移码突变,不具有该功能结构域;(3)对C(t)基因qRT-PCR分析发现,除25DAP外,其余4个时期在698-3R中表达水平均显著或极显著高于698-3;以 A1和 C2基因表达验证分析发现,C(t)与验证基因表达模式一致,说明C(t)可能具有 P1激活调控 A1和 C2基因表达的功能。推测该红轴基因C(t)可能为一个 P_1-wr基因。     

基于DSP与超声波测距的农业机器人定位与避障控制

随着新兴电子集成技术和自动化技术的发展,控制系统已逐渐向数字化转变,高集成芯片广泛应用于自动化控制领域,体积小、运算能力强的嵌入式系统慢慢开始取代计算机。为此,首先分析了超声波测距功能及其优越性,采用三球定位技术,设计研究了一种基于DSP和超声波的全局定位系统;然后,采用多路超声波收发模块设计了基于超声波的自主避障控制系统,并提出一种新的模糊推理方法,实现机器人的避障和路径规划功能;最后,采用Visual C++可视化程序设计软件对避障系统进行仿真和场地试验,验证了系统的可靠性和可行性,为机器人的研究和发展提供了更加宽广的空间。     

Effects of cover crop growth and decomposition on the distribution of aggregate size fractions and soil microbial carbon dynamics

Although the effects of cover crops (CC) on various soil parameters have been fully investigated, less is known about the impacts at different stages in CC cultivation. The objective of this study was to quantify the influence of CC cultivation stages and residue placement on aggregates and microbial carbon (C_mic). Additionally, the influence of residue location and crop species on CO₂ emissions and leached mineralized nitrogen (N_min) during the plant degradation period was also investigated. Within an incubation experiment, four CC species were sown in soil columns, with additional columns being kept plant‐free. After plant growth, the columns were frozen (as occurs in winter under field conditions) and then incubated with the plant material either incorporated or surface‐applied. With CC, concentrations of large and medium macroaggregates were twice that of the fallow, confirming positive effects of root growth. Freezing led to a decrease in these aggregate size classes. In the subsequent incubation, the large macroaggregates decreased far more in the samples with CC than in the fallow, leading to similar aggregate size distributions. No difference in C_mic concentration was found among the CC cultivation stages. CO₂ emissions were roughly equivalent to the carbon amounts added as plant residues. Comparison of columns with incorporated or surface‐applied residues indicated no consistent pattern of aggregate distribution, CO₂ emission or C_mic and N_min concentrations. Our results suggest that positive effects of CC cultivation are only short term and that a large amount of organic material in the soil could have a greater influence than CC cultivation.     

Effects of Rice Variety and Growth Location in Cambodia on Grain Composition and Starch Structure简

The effects of variety and growth location on grain composition and starch structures were investigated using three rice (Oryza sativa L.) cultivars (Phka Romduol, Sen Pidao and IR66) with different amylose contents. All the three cultivars were planted in three different agro-climatic zones (Phnom Penh, Coastal and Plateau) of Cambodia. The protein content of polished grains increased when rice was planted at a location with higher average temperature, but their lipid content decreased. The amylose content and degree of branching were not greatly affected by the minor temperature differences among the growing locations. Starch fine structures characterized by the chain-length distribution were significantly different among the cultivars, but not significantly among different locations. The results suggested that protein and lipid biosyntheses were more sensitive to the environmental temperature than that of starch in rice grains.     

我国北部冬麦区小麦区域试验重复次数和试点数量的优化设计

农作物品种区域试验重复次数和试点数量的合理配置有利于提高试验的成本效率和品种选择效率。本研究分析了2010—2019年期间北部冬麦区小麦品种区域试验的重复次数和试点数量设置的合理性,依据小麦品种试验的信噪比和遗传力水平随重复次数和试点数量的变化规律,提出了重复次数和试点数量的优化设计方案。结果表明:(1)北部冬麦区小麦单点试验的遗传力平均达到0.87,需要的重复次数平均值仅为1.4,说明3次重复可以充分保证试验精确度的需求。(2)北部冬麦区水地组和旱地组小麦区域试验达到0.75的遗传力水平时,需要的试点数量分别为11个和13个,目前有效试点数量分别约为11个和8个,分别达到0.75和0.60的遗传力水平。(3)小麦品种区域试验结果对品种的审定和应用十分重要,而每年都可能有少数试验点因为各种异常情况而报废,为保证试验结果的可靠性,可按H=0.75的水平需求安排试验点数量和重复次数,即重复次数可保持当前的3次;水地组的试点数量可保持在11个左右;旱地组可将试点增加到13个;如要将遗传力提高到0.80的水平,则需约16个试点。     

基于VLF/LF三维闪电探测系统的贵州省全闪分布特征分析

为进一步加强云闪分布特征分析，增强对雷暴云内物理过程的认识，利用2015—2017 年VLF/LF三维闪电探测系统的数据资料对贵州省闪电特征进行空间和时间分布特征分析。结果表明：无论云闪还是地闪，均以负闪为主；闪电发生主要集中在夏季，冬季闪电最少，闪电月际分布主要为单峰型，仅冬季Z比率大于1；闪电主要发生时段为16 时至次日凌晨2 时，Z比率与全闪频数随时间的变化呈正相关，相关系数0.618；全省闪电密度整体呈西高东低趋势，年均闪电密度为5.07 次/(a ·km2)；云闪主要发生在高度2k~7 km，全年云闪高度呈下降趋势；雷电强度主要分布在5k~45 kA，平均陡度为7.34 kA/μs。本研究有利于对闪电特征开展更全面的探究和分析，同时对强对流天气监测和预警也有重要意义和价值。     

小麦耐热性基因的染色体定位和遗传效应分析

以中国春-HOPE染色体代换系为试验材料，利用细胞膜热稳定性和大田生产条件下高温胁迫两种方法，对与耐热性有关的基因进行了染色体定位。结果表明，无论是利用膜热稳定性方法，还是利用大田高温胁迫环境进行耐热性评价的方法，HOPE的2A，3A，2B，3B和4B染色体代换到中国春相应染色体后，均显著提高了中国春的耐热性，证明这些染色体含有与耐热性有关的基因。在大田高温胁迫环境条件下，HOPE的3D，4A，5A和5B染色体也表现与耐热性有关。利用单染色体代换系和不同耐热性代换系杂交组合，对耐热性的基因效应分析结果显示，HOPE2A染色体上的耐热性基因表现为显性效应，3A，2B，3A和4B染色体上的耐热性基因表现为加性效应；3B与4B，3A与2A，3B与2B以及这些染色体上的耐热性基因与2A染色体上的耐热性基因之间均可能存在互作效应。