改善E1级胶合板用UF胶粘剂预压性能的研究

利用氧化淀粉在树脂合成后期、API在调胶时加入分别对脲醛树脂进行改性，探讨改性UF对胶合板预压强度的影响。采用正交实验法对比改性后胶合板的预压性能和改性后胶合板的甲醛释放量的变化。结果表明：随着API量的加大，胶合板的预压性能得以提高；而氧化淀粉改性后则随着量的加大，一定范围内胶合板的预压性能得以提高，加入量继续加大后反而下降。     

Influence of death struggle on the structural changes in chub mackerel muscle during chilled storage

ABSTRACT: Chub mackerel (34–35 cm, approximately 500 g), which were caught by fishing with a rod and line at the Bungo Channel, Oita prefecture, were rested overnight in a fish preserve and either killed by decapitation (control group) or allowed to struggle in air for 30 min (struggled group). Muscle samples were excised every 4 h, and measurements on breaking strength and histological observations were done for both groups. The breaking strength of muscle in the control group was significantly higher than that in the struggled group, whereby a decrease in breaking strength was delayed for 12 h compared to the struggled group. Light microscopy showed space extension among muscle cells in association with a decrease in breaking strength. Especially in the struggled group, the extended area was larger and the difference in area was significant at the time when breaking strength showed a significant difference. Using electron microscopy, the extended area showed cut and/or disappeared collagen fibrils. From these results, it was demonstrated that struggling to death promoted the degradation of collagen fibrils and the weakening of connective tissue and, resultantly, led to the faster softening of muscle of chub mackerel.     

Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

室内型胶合板天然耐久性的初步研究

作为一项反映材料优劣的重要的评价指标,天然耐久性直接决定了材料的使用寿命.笔者通过对胶合板胶合强度性能连续14年的跟踪测定,讨论和分析了胶合板的天然耐久性.最后总结出了胶合板在使用过程中随时间迁移其胶合强度性能随外界变化的规律,以期为胶合板的生产制备、生产工艺的改进及其应用领域的拓宽等方面起到一定的指导作用.     

IWSF-FA模袋混凝土抗压强度、孔隙结构和物质组成

为优化模袋混凝土衬砌性能,合理利用当地粉煤灰和废弃硅粉代替部分水泥制备模袋混凝土衬砌.通过抗压强度试验、固体紫外试验、核磁共振和热重试验研究双掺粉煤灰-工业废弃硅粉替代适量水泥后对模袋混凝土抗压特性、内部孔隙结构和水化物质组成的影响.结果表明：合理双掺工业废弃硅粉和粉煤灰(如FA15S4)可以提高模袋混凝土的抗压强度;紫外吸收光谱表明其水化产物C-S-H和CH组成优于其他组别;核磁共振T₂谱分布呈现“三峰结构”,左峰信号幅度最高,双掺工业废弃硅粉-粉煤灰有利于改善其内部孔隙结构.并且双掺工业废弃硅粉和粉煤灰后,热学性质良好.建立了基于BP神经网络理论的模袋混凝土早期抗压强度预测模型,预测结果与试验测试值的最大相对误差为2.7%.研究结果可为工业废弃硅粉和粉煤灰混凝土在水工衬砌工程中的应用提供参考依据.     

川西粉质黏土-衬砌接触面冻结强度规律研究

为揭示川西灌渠粉质黏土-衬砌接触面间冻结强度规律,针对川西地区灌渠渠基土开展了冻结作用下冻结温度、冻结时间、初始含水率、法向荷载4种影响因素在不同条件下的剪切试验.结果 表明:接触面间峰值抗剪强度与冻结温度、初始含水率变化呈负相关,与冻结时间、法向荷载变化呈正相关.此外,利用正交分析,揭示了4种因素对峰值抗剪强度影响的...     

双质量飞轮内部传动结构强度及疲劳寿命分析

随着初级飞轮与次级飞轮相对转角的变化,分段变刚度双质量飞轮具有不同的刚度特性和非线性变化转矩,双质量飞轮内部传动结构作为传递动力和运动部分,结构可靠性和使用寿命必须保证.将建立的三维CAD模型导入HyperMesh软件中进行有限元分析前处理,建立了有限元分析模型,经过仿真求解计算,分析了结构变形、应力分布特点,对比分析...     

pH及离子强度对渗滤液水溶性有机物同步荧光光谱的影响

采用同步荧光光谱技术分析填埋场不同填埋时期渗滤液水溶性有机物的理化性质,研究填埋场不同填埋时期渗滤液水溶性有机物(DOM)在三个代表性pH和不同离子强度下的同步荧光特性。结果表明,pH及离子强度对DOM的荧光性质都有较大影响。DOM的荧光特性受pH影响显著,填埋前、中、后期DOM在不同pH下的荧光峰位置与强度均不一致。离子强度对DOM荧光特性影响相对较小,由于盐析等作用,随离子强度的增加,各DOM的荧光强度一般都在降低。填埋前、中期DOM在pH 13时随离子强度的变化较显著,而填埋后期DOM在pH 3时随离子强度的变化较显著。研究为填埋场渗滤液溶解性有机物的毒性评价和污染防治提供了基本信息。     

广西各地市区域经济发展水平分析——基于系统繁类法和主成分分析法

选取关于广西各地市经济发展的10项指标,依据相关经济数据,采取系统聚类法和主成分分析法,对广西各地市区域经济发展进行分析。结果表明,在分析广西各地市的经济发展水平时,系统聚类法和主成分分析法结果一致;广西总体经济实力较弱,南宁市由于具有政治经济文化中心优势,各项因子得分较高,其余各地区的综合得分均低于1,与南宁市的发展差距较大;在总体发展战略中,广西应加快北部湾经济圈建设,打造具有国家发展战略意义的强大物流体系;应利用独特的区位优势,依托现代交通运输体系,加快构建东西互动、南北贯通和连接国内腹地及东盟市场的物流中心和商贸中心。基于广西各地市的区域经济发展不平衡问题,提出了加快南宁市服务业的发展、构建工业城市的循环经济体系、加速旅游城市的工业化、产业化进程等对策建议,以期实现广西各地区经济的均衡发展。