大型薄壳制件真空辅助树脂传递模塑工艺充模方案仿真分析及优化

针对大型树脂基复合材料制件不适于用实验试错法进行充模方案设计的问题,在分析树脂流动规律的基础上将大型薄壳件的求解区域分解,仿真分析了不同充模方案下树脂在纤维中的流动行为和模腔内压力变化,提出在制件填充面积等分处设置流道的方法,选择和优化大型薄壳制件的充模方案。结果表明:①对于不便进行实验试错法进行真空辅助树脂传递模塑(VARTM)工艺充模方案设计的大型薄壳制件,可以采用数值模拟的方式,以达西定律、能量守恒定律等为计算依据,求解压力场和速度场,对比不同仿真方案的充模时间等数据合理安排注胶方式方法,指导VARTM工艺制备大型复合材料制件合理安排注胶方式,提高生产率、减少因树脂浸润不均匀产生的缺陷。②对于大型薄壳类制件,忽略厚度方向尺寸,影响充模时间的主要因素为流道长度和树脂流动距离。选取尽可能长的注胶流道,合理设置流道位置以减少树脂流动的距离;长流道可以增加树脂瞬时注入量、提高较长时间的压力差;而树脂流程越长,树脂前锋处压力损失越大,流速越慢。③试验提出了制件填充面积等分处设置流道的方法。将大型薄壳工艺制件充模面积等分,注胶流道布置在垂直于制件长度方向的面积等分线上,可缩短充模时间并减少制件两端的树脂富集现象。对于较狭长部分可再次进行面积等分设置流道,以免造成树脂流程过长压力流失过多;而对于较宽阔部分不宜设置过多流道以免树脂前锋稳定前互相接触造成制件充模不均匀。     

野生老芒麦种质资源鉴定与基部叶鞘绒毛变异分析

为更好地利用老芒麦(Elymus sibiricus L.)野生资源,本研究从我国青藏高原、西北、华北、东北地区以及国外部分地区共采集了1 723份野生披碱草属种质资源,通过表型特征观测和流式细胞仪检测,共鉴定出了990份野生老芒麦种质,246份垂穗披碱草种质,并测得老芒麦的DNA含量在5.86～7.30 Gb之间,平均DNA含量为6.66 Gb;垂穗披碱草材料的DNA含量在9.50～10.36 Gb之间,平均DNA含量为9.97 Gb。研究结果显示,在西北、华北以及东北地区的部分野生老芒麦材料在苗期基部叶鞘出现了绒毛,分析发现该表型出现的概率与经度和纬度呈极显著正相关关系(P<0.01),与海拔、年年均气温以及年平均降雨量呈极显著负相关关系(P<0.01)。表明老芒麦苗期基部叶鞘绒毛的有无与环境因子之间存在着必然的联系,可能是老芒麦种质应对不同环境类型的适应性机制之一。本研究为老芒麦的形态鉴定提供了新的依据,为老芒麦种质资源挖掘和育种应用提供了材料基础。     

Identification and establishment of sorting method for isolating CD11b+ myeloid cells in human hepatic metastases from colorectal cancer

AIM: To establish a method for obtaining specific cells in solid tumor tissue by sorting of CD11b⁺ myeloid cells in hepatic metastases from colorectal cancer.METHODS: Tumor tissues were prepared into single cell suspension by mechanical method combined with enzyme digestion, and then the CD11b⁺ myeloid cells were isolated by flow cytometry. The sorted cells were identified by immunocytochemistry. The viability and morphologiy of the sorted cells were evaluated by Giemsa and Typan blue staining. The cell purity was evaluated by flow cytometry.RESULTS: Sufficient numbers of CD11b⁺ cells with high purity were isolated by sorting with flow cytometry from the single cell suspension prepared by mechanical and enzyme digestion. The purity of the cells was confirmed by statistical analysis (P<0.05). The positive rates of the cells before and after sorting were significantly different (P<0.01). The positive cells were verified by immunocytochemical method. Meanwhile, the sorted cells had complete morphology and good activity.CONCLUSION: The CD11b⁺ myeloid cells in solid tumor tissue can be isolated by flow cytometry from the machine-enzyme digestion suspension with high purity, good activity and complete morphology.     

猪耳廓软骨板细胞的体外传代培养

耳廓是哺乳动物听觉器官的重要组成部分.猪(Sus Scrofa)耳廓大小经历长期的人工驯养和选育后变异很大.目前,对猪耳廓大小的研究主要集中在遗传机理的解析,对其在细胞水平的研究还尚未完善.本研究通过酶法分离得到猪耳廓软骨板细胞并在体外培养,将原代猪耳廓细胞连续培养,用流式细胞仪分别检测从3～10代耳廓软骨板细胞的大小和分布情况,以及耳廓软骨板细胞与软骨干细胞阳性标记物CD44和CD90的结合能力.同时,将3～10代细胞分别与Annexin V-FITC/PI(细胞凋亡试剂盒)孵育,用流式细胞仪进行凋亡特性分析.通过流式细胞检测发现,体外培养的软骨板细胞由软骨细胞(P1)和软骨前体细胞(P2)组成.P1细胞占大多数(69.4％),呈纤维状;P2细胞为少数(11.0％),呈椭圆状.与CD44和CD90结合分析表明,P1细胞几乎不能与CD44结合,绝大部分P2细胞能与CD44结合,P1和P2细胞均能与CD90相结合,P2细胞结合能力略强于P1细胞.分别对两类细胞进行细胞凋亡分析后发现,P1细胞体外培养只有少量细胞凋亡或坏死,活细胞率达(96.61±1.32)％,说明P1细胞在体外传代过程中能维持稳定状态;P2细胞处于晚期凋亡和坏死细胞的比例＞83％,说明P2细胞在体外培养条件下细胞状态不稳定.本研究结果表明,体外建立一套针对于软骨前体细胞培养的体系很有必要,以保证软骨前体细胞可以持续增殖、并可向软骨细胞转化.本研究为今后以猪耳廓作为模型开展人类弹性软骨再生医学研究提供了基础依据.     

电控喷油器流量性能检测试验装置

设计的电控喷油器性能测试装置,可有效检测喷油器的主要性能指标,为提高发动机燃油动力性、经济性以及降低排放提供了技术支持。检测试验证明,该测试装置具有效率快、精度高、性能稳定的特点,具有实际应用价值。     

液体肥料施用装置设计与试验

针对液体肥料发展迅速和液体肥料施用装置发展不完善的现状，研制了一种可测量液体肥施用装置主要技术性能及参数的试验台，在此基础上对喷头流量影响因素作了三因素二次回归正交旋转试验，得出了液体肥料质量分数、电动机转速及喷头口直径大小对喷头流量的影响规律及主次关系。     

Difference in cutting age for highest profit by methods for calculating CO<Subscript>2</Subscript> emission trading and the price of CO<Subscript>2</Subscript>

 The amounts of CO₂ that are absorbed and emitted by forest in a model stand area were determined using two calculation methods, namely the flow approach and the stock approach for emission trading, to understand the relationships between the cutting age for the highest profit rate (CAHPR; optimum tree ages to be cut so as to maximize the profit) and (1) the prices of CO₂ and (2) the balance between CO₂ emission and absorption. The resultant CAHPR differed between these two CO₂ accounting methods, which give different tree ages for maximum log volume yield. A rise in CO₂ price caused the CAHPR to approach the tree age of maximum log volume in the flow approach method, and to deviate from the tree age of maximum log volume in the stock approach method. Even at the same CO₂ price, the CAHPR differed between the CO₂ accounting methods. At low CO₂ prices, the CAHPR did not affect situations where the difference of average profit is large by cutting age. On the other hand, the CAHPR was greatly affected at low CO₂ prices when the mean log volume growth changed with tree age. These trends were found to be universal. Received: September 18, 2001 / Accepted: October 25, 2002 Acknowledgments This study is one of the fifth science study subsidy projects of the Japan Forest Technology Association. Correspondence to:K. Sakata     

木材渗透性可控制原理研究

本文研究了木材渗透性可控制机制,探寻了渗透性可控制原理。结果表明,影响渗透性高低的最主要因素为纹孔膜微孔半径和数量,微孔大而多者,渗透性高;微孔愈小,微孔里气-液界面上毛细管张力愈高,对液体流动的影响愈大,浸注愈难,欲使浸注液深注入木材,必须施一与此微孔半径相应足以克服此张力的压力。若欲改善低渗透树种木材的难浸注性,似应从纹孔入手,用化学的、物理的和生物的等方法增大和增多有效纹孔膜微孔半径和数量,以减小毛细管张力,降低使用压力,增大流量率,提高渗透性。     

流体性质对刮膜式分子蒸馏器上液膜形态的影响

利用高速摄像机对刮膜式分子蒸馏器壁面上的液膜形态进行了研究,实验发现随着进料率和转速的增加,不同物料在蒸发壁面上主要存在4种流动形态：液滴状、股状、不连续液膜和连续均匀液膜,同时测得水、乙醇、质量分数为12%乙二醇溶液、质量分数为50%乙二醇溶液和质量分数为50%丙三醇溶液在不同转速下出现连续均匀薄膜的临界流率。利用高斯过程进行数据预测表明：在一定转速下,临界流率随表面张力的增大而增大,随粘度的增大而减小。