激光脉冲在橘子表皮打标的效果研究

为满足水果追溯条码清晰、耐久的要求,选取橘子为试验对象,对比纳秒激光和皮秒激光在其表面打印二维码的效果。试验结果表明:与纳秒激光相比,皮秒激光在橘子表皮上打印的线条平直度佳,轮廓清晰,对表皮的损伤更小。     

Tree-ring response of Larix chinensis on regional climate and sea-surface temperature variations in alpine timberline in the Qinling Mountains

Tree-ring width chronologies of Larix chinensis were developed from the northern and southern slopes of the Qinling Mountains in Shaanxi Province,and climatic factors affecting the tree-ring widths of L.chinensis were examined.Correlation analysis showed that similar correlations between tree-ring width chronologies and climatic factors demonstrated that radial growth responded to climate change on both slopes.The radial growth of L.chinensis was mainly limited by temperature,especially the growing season.In contrast,both chronologies were negatively correlated with precipitation in May of the previous year and April of the current year.Spatial climate-correlation analyses with gridded land-surface climate data revealed that our tree-ring width chronologies contained a strong regional temperature signal over much of northcentral and eastern China.Spatial correlation with seasurface temperature fields highlights the influence of the Pacific Ocean,Indian Ocean,and North Atlantic Ocean.Wavelet coherence analysis indicated the existence of some decadal and interannual cycles in the two tree-ring width chronologies.This may suggest the influences of El Nin˜o-Southern Oscillation and solar activity on tree growth in the Qinling Mountains.These findings will help us understand the growth response of L.chinensis to climate change in the Qinling region,and they provide critical information for future climate reconstructions based on this species in semi-humid regions.     

支管射流三通结构优化与试验

为了提高支管射流三通水力性能,改善滴灌的灌水均匀性,基于CFX数值模拟技术,对进口宽度为15 mm的支管射流三通进行结构优化.选取位差、劈距、劈尖半径和侧壁倾角为影响因素,通过四因素三水平正交设计了9组模型,边界条件设定为进口压力100 kPa.选取支管射流三通出口设计流量为评价标准,支管射流三通最优结构尺寸为位差5.5 mm、劈距113 mm、劈尖半径13 mm、侧壁倾角10°.此结构尺寸参数下的支管射流三通水力性能试验结果表明:在进口水压为100 kPa时,支管射流三通脉冲频率为148次/min,水头压力振幅为37.9 kPa,水头压力损失为16.7 kPa,出口流量为0.698 L/s;支管射流三通所接滴灌带长度为60 m时,与普通支管三通相比,支管射流三通的灌水均匀系数提高了2.78%,流量偏差率降低了4.72%.该研究可为射流技术在脉冲滴灌系统的研究、开发与应用提供理论依据.     

北京松山自然保护区主要树种冠幅预测模型研究

冠幅作为林业研究的关键因子，开展冠幅的研究对于精准林业发展具有重要意义。为了更好地利用冠幅对树木其他因子进行预测，选取了北京市松山自然保护区油松、白蜡、蒙古栎等14个常见树种作为研究对象，基于6种回归方程，借助样地实测数据分别建立每个树种的胸径 冠幅和树高 冠幅模型，并针对每个树种筛选出的最优方程进行了精度检验。结果表明，研建的14个树种的模型具有较好的拟合精度，决定系数R2绝大多数都大于0.5，其中，核桃的胸径 冠幅模型最高，R2=0.951，树高-冠幅模型R2=0.887，蒙古栎树高-冠幅模型最低，R2=0.506，也超过了0.5。所建模型的精度评价指标具有一定的统计学意义，对北京市松山地区大面积林分参数的预测预估有重要的参考价值。     

Effects of cardiac contractility modulation on ventricular electrical remodeling in rabbits with chronic heart failure

AIM: To investigate the effects of cardiac contractility modulation (CCM) on ventricular electrical remodeling in a rabbit model of chronic heart failure. METHODS: The rabbits were divided into sham group, heart failure(HF) group and HF+ CCM group. The rabbit model of chronic heart failure was established by ligating the ascending aortic root. Then electrical stimulations during the absolute refractory period were delivered lasting 6 h everyday for 4 weeks in rabbits of HF+ CCM group. The QTc and ventricular effective refrective period (VERP) were recorded. The protein and mRNA levels of Kv1.4, Kv4.3 and connexin 43 (Cx43) were determined by Western blot and RT-qPCR. RESULTS: Compared with sham group, QTc were significantly prolonged in HF rabbits at week 12 (P<0.05). CCM therapy shortened QTc of rabbits with heart failure at week 16 (P<0.05). Compared with sham group, VERP significantly increased in HF group and HF+ CCM group, while CCM therapy shortened VERP of rabbits with heart failure at week 16 (P<0.05). Compared with sham group, the mRNA and protein levels of Kv1.4, Kv4.3 and Cx43 were decreased in HF group and HF+ CCM group (P<0.05). However, CCM therapy restored the mRNA and protein levels of Kv1.4, Kv4.3 and Cx43 of rabbits with heart failure (P<0.05). CONCLUSION: CCM suppresses ventricular electrical remodeling in heart failure and the underlying mechanism may be associated with increasing Kv1.4, Kv4.3 and Cx43 expression.     

苦瓜种子大小和单粒质量的遗传分析

以苦瓜自交系K7-359(P_1)和K7-422(P_2)分别作为母本和父本,通过杂交获得F_1,F_1自交获得F_2群体,采用主基因+多基因混合遗传模型分析苦瓜种子长度、宽度和单粒质量的遗传规律。结果表明,苦瓜种子长度和单粒质量的遗传均符合加性-显性-上位性多基因遗传模型(C-0模型),多基因遗传率分别为84.91%和76.55%,说明对苦瓜种子长度和单粒质量的选择宜在高世代进行;苦瓜种子宽度的遗传符合1对加性-显性主基因+加性-显性-上位性多基因模型(D-0模型),主基因和多基因遗传率分别为79.30%和3.86%,主基因遗传效应主要以加性效应为主,说明对种子宽度的改良可以采用组合育种的策略,且适宜在早期世代进行选择。     

种植方式对水稻产量及根系性状的影响

2011—2012年在湖南长沙以超级杂交稻Y两优1号、杂交稻汕优63和常规稻黄华占为材料的大田定位试验,比较了垄作梯式栽培技术(两种垄规格)和垄厢栽培技术(3种厢规格)对水稻产量和根系性状的影响。与平作栽培(T0)相比,窄垄作梯式栽培(T1)和垄厢栽培(T3)均可提高水稻产量,其中以T1的产量最高,比T0平均增产22.2%(17.1%～27.2%),其次T3平均增产10.4%(5.8%～15.0%),但随着垄宽或厢宽的增加,产量增幅逐渐下降。较高的穗数和每穗粒数、良好的根系特性(根系氧化力、根表面吸收面积、根系孔隙度)以及齐穗后干物质积累量大是上述两种栽培技术增产的重要原因。同时,根解剖结构表明垄作梯式栽培的根皮层减小、中柱和导管面积增大,增强了水分吸收能力。     

脉动燃烧技术及其在林业中的应用

脉动燃烧是指在一定声振条件下发生的一种周期性燃烧，其燃烧室内压力强度、气流速度、温度及热释放效率等参数随着时间呈周期性变化，是一种特殊的不稳定燃烧过程，具有燃烧效率高、燃料经济性好、运行环境友好等优点。研制基于脉动燃烧技术的林业作业装备对于提高林业生产效率、促进环保高效燃烧技术的发展具有重要意义。文中概述了脉动燃烧技术的工作原理、特点及发展现状，介绍了脉动燃烧技术在林业病虫害防治、木材干燥和土壤消毒中的应用，并在分析脉动燃烧技术的不足及其在林业作业应用中存在问题的基础上，提出脉动燃烧技术在林业作业应用中的发展方向。     

脉冲式烟雾水雾机热力雾化水剂农药效果分析

针对脉冲式烟雾水雾机在喷施水雾剂农药时常出现滴液、流液或较大雾滴群等雾化不良现象，通过改装6HYW-60S型脉冲式烟雾水雾机，将药液流量设置成可调的测试装置，设定5个油门开度及4个药液流量，测试了脉冲发动机喷药前后的气流速度、温度及各喷药工况下的雾滴粒径分布。结果表明，在最小的油门启动开度到最大的油门工作开度可调范围内，对应的脉冲发动机燃油消耗率变化范围较小（相对变化13.0%），喷管内对应的气流温度与速度也发生同等程度的变化。喷药时，喷管口处的气流温度与速度发生明显变化，由不喷药时约700℃的高温气流下降为75℃左右的雾滴流，相应的气流速度下降了16%左右；油门开度及药液流量对雾滴流温度的影响非常小，但对雾滴流速度的影响非常明显，油门开度增大，雾滴流速度明显增加，药液流量增大，雾滴流速度明显下降。在各油门开度下，对最小药液流量20L/h的雾化效果均不佳，尤其距喷雾出口较近处存在大量的300μm以上的较大雾滴，这些大雾滴极易跌落至地面，无法有效喷施到目标物上；药液流量增大至40L/h及以上时，各油门开度下的雾滴体积中径均较小，同一工况下各位置点的平均值不超过60μm。热力雾化的雾滴粒径分布曲线不是单一峰值的正态分布形态，常会出现不同中心雾滴粒径的雾滴群，且这些雾滴群的中心雾滴粒径基本保持一致。从喷雾出口喷出的雾滴流中，喷管中心轴线上的雾滴细小均匀、雾化充分，中心轴线上方的雾滴一般比中心点处稍大，中心轴线下方雾滴明显增大，且距中心轴线越远的下方，雾滴增大越明显，即雾滴流中较大雾滴群的量逐渐增加。以药液流量60L/h及油门开度90°为最佳雾化工况，在整个喷施区域内均形成了良好的雾化效果。