考虑雷诺数和形状影响的坝岸根石水平水流拖曳力系数修正

对于水利工程坝岸散抛根石冲揭失稳,水流作用下根石的拖曳力是重要的力学分析参数。该文基于黄河坝岸散抛根石的形状参数特征,利用水槽试验量测球体及不同形状块体受水流作用的水平拖曳力,研究雷诺数、物体形状指标与拖曳力相关关系及变化规律,明确影响因素,率定双因素影响下块体的拖曳力系数函数。结果表明,水下球体或近似球状物体的拖曳力系数,基本不受水流及物体形态影响,拖曳力系数趋于0.40～0.56;有棱角块体的水流拖曳力系数,块体雷诺数小于3×104的影响区域,系数函数呈双曲线趋势变化;块体雷诺数大于3×104的影响区域,迎水面宽高比不大于侧立面长高比,拖曳力系数趋于0.80～0.90,迎水面宽高比大于侧立面长高比,拖曳力系数趋于1.00～1.10。进一步通过试验修正了水流作用下不同形态物体的水平拖曳力系数,提出了块体雷诺数、形状参数双因素影响下物体水平拖曳力系数函数,得到了以不同物体来流方向投影响面积为基准的水平拖曳计算公式,经拟合公式的合理性分析与验证,拖曳力系数拟合优度达到0.90以上,平均相对误差为8.7%;修正后拖曳力平均相对误差仅为7.5%,公式计算效果良好,更准确地反映散抛根石的水下受力特征,为分析水下抛石受水流冲击离散形态提供理论依据。     

基于DEM仿真与试验验证的双轴螺旋输送机结构优化分析

针对螺旋输送机的输送效率问题,对双轴螺旋输送机输送颗粒物料的过程进行离散元法数值计算,并与单轴螺旋输送机输送物料的试验和模拟结果进行对比。在试验验证了仿真模型和参数正确的基础上,对双轴螺旋输送机的轴距和螺距2个参数与质量流速率(■)间的定量关系进行二元二次多项式拟合,得到拟合优度R~2=0.964 6的回归方程。研究结果表明:1)双轴的相对转动方向对■没有影响;2)螺距和轴距对■均有明显影响。■随着轴距的增大显著增大,大螺距时会在达到极值后趋于稳定或略有下降;■随着螺距的增大先增大至峰值后下降;3)双轴的螺距和轴距对颗粒运动影响显著。两轴中间位置颗粒的最小轴向平动速度与轴距呈现近似线性的递减关系,且螺距越大,其减小趋势越明显。     

水田机械式强制排肥装置设计与试验

目前水田机械施肥均匀性差，且作业时在施肥开沟器末端容易出现肥料粘结、架空、堵塞开沟器等现象。针对以上问题，本文设计了一种水田机械式强制排肥装置，并对其关键部件进行了结构设计及性能试验。将水田机械式强制排肥部件的工作过程分为3个阶段，通过运动学和动力学研究方法分析了各工作阶段肥料在螺旋强制排肥部件内的状态，以及影响排肥部件工作性能的关键因素，对螺旋强制排肥部件的直径、转速、螺距3个因素进行了设计计算。以排肥均匀性变异系数为响应指标，进行了螺旋强制排肥部件的单因素台架试验，通过对最小显著性差异进行统计分析，确定了各因素的取值范围；安排了二次正交旋转组合试验，并对试验结果进行了方差分析和响应面分析，确定了影响排肥性能指标因素的影响由大到小为转速、螺距、直径，建立了排肥性能指标与各因素之间的回归方程，运用Design-Expert软件对试验因素优化求解，确定了较优工作参数组合为螺旋输送器转速120.09r/min、直径23.90mm、螺距21.54mm，此时施肥装置台架试验的排肥均匀性变异系数为7.18%。将所设计的强制排肥部件分别安装在水稻插秧机及水稻气力式施肥播种机上，进行了田间验证试验，试验结果表明，机械式强制螺旋排肥装置工作稳定、堵塞率低，水田防堵塞效果优于无该部件的施肥机械。     

Grass silage for biorefinery—A meta‐analysis of silage factors affecting liquid–solid separation

This meta‐analysis based on 19 studies from Finland comprising 43 grass silages was undertaken to evaluate the effect of silage quality on liquid yield, liquid composition and retained compounds in liquid using four different liquid–solid separation methods. Silages were classified according to species (grass, clover or a mixture of them), additive treatment (no, biological or formic acid‐based additive) and harvest (primary growth or regrowth). A mixed model regression analysis with random study effect was used to evaluate the impact of silage characteristics on biorefinery efficiency. There was a large variation in silage quality in the data set. Silage dry‐matter concentration was the characteristic most highly correlated with liquid yield for all separation methods, and when used as an independent variable in the model, it resulted in the best predictions. The liquid–solid separation methods presented a great variation in the liquid yield, ranging from 0.26 to 0.56 when silage dry‐matter concentration was standardized to 250 g/kg. There was no effect of additive treatment and harvest in the estimation of the biorefinery potential, but species was a significant variable in predicting liquid yield for the laboratory‐scale presses with higher liquid yield for mixed grass and legume. The high correlation between silage quality and liquid yield and liquid composition provides potential to predict the biorefinery potential based on equations developed for each separation method. This information can be used to modify the silage production systems so that they best meet the requirements of a green biorefinery process.     

中国女子曲棍球伦敦奥运会技战术分析

伦敦奥运会，中国女曲小组赛只取得两场胜利，最后在排位赛中，输给澳大利亚，排名第六。通过对比赛的技术数据分析得出中国女曲伦敦奥运会在技战术方面存在一些不足，主要表现为：在组织进攻方面尤其是强攻能力明显不足，短角球攻防技术与世界强队有明显差距，前后场配合、攻防跑位能力仍有待提升。为提升未来中国女曲水平，有必要在进攻能力提升、短角球攻防技术演练、前后衔接与攻防跑位磨合及新规则理解及实践运用等方面进行研究。     

云杉胶合木钢板斜螺钉连接的剪切性能研究

为准确评价斜螺钉连接钢 木节点的剪切性能,探明其受力机理,以云杉胶合木、钢板和自攻螺钉作为研究材料,测试不同荷载方向与受力情况下斜螺钉连接节点的承载性能,将试验数据与国外规范中的计算模型进行对比,提高了侧边钢板 胶合木(钢 木)斜螺钉连接节点承载性能的预测能力。结果表明:自攻螺钉与剪切面之间的角度变化对其在钢 木节点承受剪 压复合应力的承载力影响不明显,当偏转为剪 拉复合应力时,节点承载力明显增大,并在30°~45°获得最大值;剪 压复合应力时,现行EC5公式计算剪 压节点的极限承载力非常不安全;EC5的刚度预测结果在剪 压复合应力区和垂直剪切面钉入时,与试验值吻合度很高,但对剪 拉区节点的滑移模量没有预测性;将Tomasi模型应用于斜螺钉连接钢 木节点滑移模量理论计算时,在45°~90°时与试验值吻合度极高。单颗自攻螺钉的抗拔刚度计算节点滑移模量的方法极为有效,具有较高的借鉴意义。     

Mechanical and physical screw withdrawal properties behavior of agglomerated panels reinforced with coir and pejibaye fibers

The screw withdrawal resistance and the mechanical behavior of agglomerated panels reinforced with coir and pejibaye fibers were evaluated using through and non-through screw withdrawal tests. Widespread commercially materials, such as Pinus solid wood, Medium Density Fiberboard (MDF) and plywood, were also tested in order to compare the behavior and results obtained with the lignocellulosic-reinforced agglomerated panels. Among the conventional materials tested, the highest maximum withdrawal load/thickness ratio was measured in solid wood. Panels reinforced with natural fibers showed lower withdrawal resistance than conventional materials. However, panels reinforced with coir fibers reached about 74% of the maximum strength achieved by MDF samples. Panels reinforced with pejibaye showed the worst mechanical performance. Hybridization between pejibaye and coir fibers resulted, however, in a performance improvement of approximately 50% in the maximum withdrawal load comparing with panels reinforced only with pejibaye fibers. The behavior along screw withdrawal was analyzed and could be split into four different steps. Each of these steps was correlated to the screw withdrawal rate, and also with the interactions between the material and the screw. The mechanisms involved in each step are presented and discussed.     

螺旋式输送装置参数优化研究

为了提高农业纤维物料螺旋式输送装置的输送性能,降低输送功耗,提高生产率,利用MATLAB软件对比功耗数学模型进行单变量优化分析,并结合试验验证了理论分析的一致性。试验结果表明:螺旋式输送装置输送性能最佳的取值范围是:喂入量30～70 kg/min、螺距300～355 mm、螺旋轴转速97～137 r/min。以比功耗作为输送性能评价指标,采用3因素3水平的Box-Benhnken响应面分析法进行参数优化试验,得到了影响比功耗各因素的主次顺序:喂入量、螺距、螺旋轴转速。以比功耗最小为优化目标,利用Design-expert的优化模块对试验结果进行分析,确定出各因素对指标影响的最佳参数组合:螺距335 mm、螺旋轴转速117 r/min、喂入量30 kg/min,输送性能优化后比优化前提高了8%,上述成果满足预期设计目标,可为螺旋式输送装置的参数优化和结构改进提供一定的参考和指导。     

自动润滑装置在数控无卡轴旋切机上的应用

数控无卡轴旋切机的刀台进给系统通过丝杠螺母的传动可实现刀体座的进退,传动丝杠螺母都是依靠人工润滑,如果润滑不及时就会出现粘牙现象而导致整个设备不能工作。介绍了一种自动润滑装置,其可实现对丝杠螺母的自动润滑。