便携式木材绞盘机新型卷筒离合器设计

在利用便携式木材绞盘机进行木材生产试验过程中,发现卷筒离合器在分离与接合过程中易出现卡阻现象,从而影响集材生产效率。在对牙嵌式离合器结构进行受力分析和卡阻原因分析的基础上,基于Solid Works的建模分析设计方法,设计了一种新型多孔旋转圆柱式卷筒离合器,该方法有效缩短了新型卷筒离合器的设计周期。新型卷筒离合器采用圆柱销与圆孔的嵌合,代替牙嵌式离合器牙嵌轴与牙嵌套的嵌合,同等试验条件下,旋转柱销式卷筒离合器平均分离时间分别比柱销式卷筒离合器节省3.71 s、比牙嵌式卷筒离合器节省8 s,改善了便携式木材绞盘机卡阻后离合器分离困难的现象,节约了离合器分离时间,从而有效提高了便携式木材绞盘机在集材作业中的生产效率。     

角钢⁃集成材L形组合柱的受压性能研究

为提高装配式木结构中异形柱的力学性能,设计了一种用热压等边角钢和SPF集成材为原料,环氧树脂胶黏剂连接制作的角钢-集成材L形组合柱,作为框架结构或框架剪力墙结构的角柱。以角钢边宽度对L形柱正截面承载力的影响进行了轴压试验研究,并进行ANSYS有限元模拟,以判断模拟预测的准确性。结果表明:角钢-集成材L形组合柱相对于同截面面积的木柱而言承载能力上升37.0%~51.4%,刚度上升36.5%~72.8%,同时L形柱有良好的延性;适当增加L形柱中的角钢边宽度可以使承载能力有效提高,但是其短边处的集成材易产生破裂,增加试件的脆性破坏;集成材之间的环氧树脂胶合界面在破坏前后都性能良好,在材料弹性阶段钢材和木材有效共同受力,承载力计算时需要考虑钢材的塑形增强作用;ANSYS有限元模拟的角钢-集成材L形组合柱弹性模量结果和试验结果一致,误差在10%以内,模拟结果基本可靠。研究成果对于预测角钢-集成材L形组合柱在实际预制装配时的安全可靠性提供了理论依据。     

基于C语言的结构用集成材木梁抗弯刚度模型研究

基于平行轴定理,采用变换截面法建立结构用集成材木梁的抗弯刚度C语言可执行程序模型,并通过足尺木梁的抗弯力学性能试验验证模型的有效性。本试验根据木材抗弯弹性模量测定方法国家标准（GB/T 1936.2—2009）中的相关要求,测定层板木材的抗弯弹性模量并将其导入C语言程序模型,得到梁体抗弯刚度的模型理论值。依据结构用集成材国家标准（GB/T 26899—2011）对木梁进行四点抗弯测试并实时采集梁体跨中挠度、荷载数据,得到梁体抗弯刚度的实测值。对比梁体抗弯刚度的模型理论值与实测值,得出其平均相对误差率为3.89%。结构用集成材木梁抗弯刚度模型的建立应充分考虑梁体自身的构造缺陷,以综合层板的力学性能变异性及尺寸效应等影响因素,合理引入修正系数,提高模型的准确度与适用性。     

落叶松层板分级质量评价

对落叶松胶合木用层板进行目测分级并测定其弹性模量和静曲强度,研究各等级层板的弹性模量和静曲强度及其相互之间的关系,探讨层板目测分级和机械弹性模量分级的科学性、合理性。结果表明:根据层板缺陷进行目测分级,等级高的层板其弹性模量和静曲强度的平均值和5%分位值高,目测分级能够基本反映其材质性能,具有一定的科学性与合理性;但目测分级层板弹性模量和静曲强度值的离散度很大,目测分级所能达到的准确与可靠程度决定其不能替代机械弹性模量分级。机械弹性模量分级层板的静曲强度与弹性模量呈正相关性,但各等级层板的静曲强度与弹性模量的相关系数大不相同,其静曲强度值的离散度也比较大,说明该分级方法还有改善的余地。更加科学、可靠的胶合木层板分级方法还有待进一步的探索研究。     

DNA技术在木材来源鉴定中的应用

DNA技术在木材树种鉴别和产地鉴定方面有较高的准确性,可用于提高木材合法性检验的可信度和木制品产销链跟踪,具有国际通用性和可行性.然而由于DNA技术特点和木材特性,其实际应用尚有一定难度.未来还需加大投资和研发力度,尽快建立公共数据库,发挥其在合法木材贸易中的重要作用.     

A5-13杨、A5-17杨木材材性测定

以A5-13杨、A5-17杨等6个杨树种、品种(系)为试验材料,对基本密度、气干密度、干缩系数、纤维长度、纤维宽度及综纤维素含量进行了测定,结果表明:A5-13杨、A5-17杨属于木材密度中等的品系,基本密度均为0.36 g·cm-3,气干密度分别为0.43 g·cm-3、0.42 g·cm-3;体积干缩系数分别为0....     

CITES公约中云南濒危管制木材树种资源概述

根据CITES公约附录保护与管制木材种类名录，对云南处于濒危管制的木材树种资源现状进行研究。结果表明，全省被列入CITES公约的木材共有8种（类），其中附录Ⅱ有5种（类），附录Ⅲ有3种（类）。     

Benefits and risks for Melanesian households from commercialising Canarium indicum

This research note discusses the benefits and risks for Melanesian households arising from attempts to increasingly commercialise Canarium indicum, an edible tree nut indigenous to Papua New Guinea, the Solomon Islands and Vanuatu. Qualitative data were generated during workshops and interviews with Canarium industry stakeholders about the impacts associated with a series of interventions designed to encourage further commercialisation of Canarium. The findings are organised according to three dimensions that elucidate the social implications of industry development for local communities: (i) income and growth; (ii) equity; and (iii) voice and choice. Broader distribution of benefits within and between countries, as well as among supply chain actors, requires a stronger policy response at regional (Melanesia) and national scales, equitable gender representation to avoid reinforcing existing inequalities, and delegation of decision‐making power to the appropriate level to facilitate effective community participation and their links with other stakeholders. Thus, it remains to be seen whether Canarium‐related benefits arising from its commercialisation can be sufficiently reliable compared with either other sources of income (e.g. existing employment opportunities for those located near urban areas) or utilising the resource for subsistence purposes.     

S‐locus diversity and cross‐compatibility of wild Prunus avium for timber breeding

Prunus avium is primarily cultivated for its fruit, sweet cherries. However, it is also used to produce high‐quality timber. In a P. avium seed orchard, gametophytic self‐incompatibility is a restriction for free pollen flow and should be considered when establishing basic forest materials. In this study, S‐locus diversity and cross‐incompatibility of wild cherry individuals in clonal banks established for breeding for timber production were investigated. Wild cherry trees (140) with outstanding forest growth habit, collected in northern Spain, grafted and planted in two clonal banks, were genotyped at the S‐locus. The self‐incompatibility S‐locus genes, S‐RNase and SFB, were analysed by PCR. Twenty‐two S‐haplotypes, resulting in 72 different S‐genotypes, were identified. The genotypes were grouped into 33 incompatibility groups and 39 unique genotypes. This initial S‐locus analysis revealed large genetic diversity of wild cherry trees from the Spanish northern deciduous forest, and provides useful information for seed orchard design. Wild P. avium displays significantly more genetic diversity than what is detected in local cultivars, revealing a narrowing of genetic diversity during local domestication.     

毛竹笋,材加工剩余物的饲用价值

对毛竹笋、材加工剩余物作为反刍动物饲料的营养价值进行研究表明，竹笋加工剩余物营养价值较高，可直接或经适当处理后用作饲料，竹材加工剩余物因蛋白质含量低，木质素含量高，直接作为饲料的营养价值不及作物秸秆。由于竹材加工剩余物中含有３／４的碳水化合物，故具有作为反刍动物饲料的潜在价值。对竹材加工剩余物进行氨化处理，可明显提高粗蛋白含量，并使质地变得松软，而竹材加工过程中的高温蒸煮、切削加工和烘干处理等，可破坏其细胞壁，使碎料膨松柔软，降低了粗纤维含量，作为食物纤维素定量的ＮＤＦ、ＡＤＦ和木质素值均有不同程度下降。