打结器支架精铸毛坯误差分析与五轴数控加工方法

针对打结器支架铸造毛坯存在误差、支架结构复杂、难以加工成型等问题，为了减小支架毛坯铸造误差对加工质量的影响，基于三维扫描技术对打结器支架毛坯进行逆向检测与分析，得到同一批次铸造支架毛坯的误差分布规律。通过推导不同空间坐标系下的轴孔中心坐标变换规律，提出一种支架轴孔加工位置偏离理想位置的调整方法。针对打结器支架的5个空间交错轴孔和1个凸轮曲面，设计了打结器支架的专用夹具，制定了五轴数控加工工序，通过一次装夹可完成5个空间交错的轴孔和凸轮曲面的加工。将加工成型的支架和其他零部件组装成打结器，进行了方草捆打结试验，结果表明，打结器支架上各轴孔的相对位置与角度关系准确，打结动作精准、可靠，支架加工成品率为99%，方草捆成结率为100%。     

98％棉隆微粒剂防治黄瓜根结线虫田间药效试验

以10％灭线磷GR为对照药剂,设98％棉隆MG 35、40、45 g/m2处理土壤防治黄瓜根结线虫.结果表明:98％棉隆MG 35、40、45 g/m2的3个处理,药后30 d土壤中2龄幼虫虫口减退率分别为89.45％、90.50％、92.05％,对照药剂10％灭线磷颗粒剂5 g/m2处理的虫口减退率为60.65％;药后90 d土壤中2龄幼虫虫口减退率分别为88.63％、89.73％、91.69％,对照药剂10％灭线磷5 g/m2处理的线虫虫口减退率为59.97％.98％棉隆MG各处理的防治效果分别为85.71％、88.80％、89.34％,而对照药剂为65.71％.表明98％棉隆MG可有效地控制黄瓜根结线虫的为害,有较好的推广应用价值.     

微波辐射处理竹节废料制备活性炭研究

研究了以竹节及其炭化料为原料，采用微波辐射氯化锌法和水蒸气法制备活性炭的可行性。探讨了微波功率、活化时间、活化剂浓度及水蒸气流量对活性炭性能的影响。得到了微波辐射竹节废料制备活性炭的最佳工艺条件：水蒸气法的最佳条件为微波功率700W、活化时间7min、水蒸气流量3．1mL／min。用此工艺条件制得的活性炭碘吸附值1012．2mg／g、亚甲基蓝脱色率165mL／g、得率52．3％。该工艺所需活化时间为传统方法的l／45左右，得率为传统方法的2倍左右。氯化锌法的最佳条件为微波功率350w、活化时间5min、氯化锌质量分数40％。用此工艺条件制得的活性炭碘吸附值l088．4mg／g、亚甲基蓝脱色率220mL／g、得率39．2％。该工艺所需活化时间为传统方法的l／36，产品活性炭亚甲基蓝脱色率为国家一级标准的1．83倍(GB／T 12496．10-1999)。     

根结线虫拮抗放线菌的筛选及菌株HA10002的鉴定与活性物质分析

为了筛选获得对根结线虫具有拮抗能力的强活性放线菌菌株,并从菌株中发现新的杀线虫活性化合物,从海南东寨港红树林采集海泥样品9份,从五指山原始森林等地采集土壤样品51份,用平板稀释法对海泥和土壤样品进行分离;以南方根结线虫2龄幼虫为靶标线虫,采用24孔细胞培养板液体线虫法进行初筛和复筛;根据形态特征、培养特征、生理生化特征和16S rDNA序列对复筛出的活性菌株进行鉴定;菌株发酵液经溶媒萃取、硅胶柱层析、Sephadex LH 20凝胶过滤和制备薄层板层析,采用活性跟踪法从中分离纯化杀线虫活性化合物;化合物经光谱及波谱分析和文献对照,进行结构鉴定。从60份样品中分离得到356株菌落形态有差异的放线菌。初筛得到16株对根结线虫校正死亡率在80%以上的菌株,复筛获得3株线虫校正死亡率在95%以上的菌株,其中分离自海泥样品中的菌株HA10002抗线虫活性最强,发酵原液的校正死亡率达100%。HA10002经鉴定为白浅灰链霉菌,从其发酵液中分离获得2个活性化合物,其中A26 3为Nocardamine,A22 1的结构正在进一步鉴定中。上述结果表明,筛选出的放线菌HA10002能合成2种以上杀根结线虫的活性代谢产物,是一株遗传稳定且具有开发潜力的活性菌株。     

基于AOS的扩展C-V模型及背景填充耦合的单板节子缺陷识别

分析木材单板节子缺陷图像的特点,提出一种基于AOS的扩展C-V模型及背景填充耦合的单板节子缺陷识别算法。首先,对Chan-Vese提出的基于Mumford-Shah模型的水平集图像分割算法进行改进,使分割速度得到提高;其次,用AOS算法改进原模型的差分格式,使得差分格式无条件稳定;最后,结合背景填充技术,使得到的新图像缩减了目标与背景间的特征差别。通过对比试验,表明该分割方法能够快速识别单板单个节子缺陷,充分说明该耦合方法比Chan-Vese方法及其改进方法有更好的分割效果。通过用多水平集作为初始轮廓演化曲线,结果表明该方法也可快速实现对单板多节子缺陷图像的识别,实现对单板节子图像的多目标分割。     

Shape and distribution of knots in a sample of picea abies logs

In an attempt to develop a better understanding of the effect of knottiness on the yield of logs for sawn timber products, the present study examines the position and geometrical characteristics of 429 knots found in seven Norway spruce (Picea abies (L.) Karst) middle logs from southern Finland. The raw data used in this study were in the form of coordinates of points located on the knot surface recorded in a cylindrical (R, L, T) reference frame. The data were smoothed using a non linear three‐dimensional model. A curvature analysis of the knot pith was used to differentiate the curved and straight portions of the knots. This analysis made possible calculation of knot angles, symmetry, ovality and volume. The major finding of this study is the uneven distribution of knots around the log circumference. Nearly 50% of the total knot volume was concentrated in one‐third of the log facing the south‐east. Knots were also more prominent in higher portions of the logs studied. These observations support the argument that the uneven distribution of knots offers potential for improving the grade yield of timber sawn from trees harvested in high‐latitude countries.     

Quantity production of anther-derived haploids from a multiple disease resistant tobacco hybrid. I. Frequency of plants with resistance or susceptibility to tobacco mosaic virus (TMV), potato virus Y (PVY), and root knot (RK)

Summary Methods are described for producing large numbers of haploid plantlets from anthers of a flue-cured tobacco hybrid with monogenic resistance to tobacco mosaic virus, (TMV), potato virus Y (PVY) and root knot (RK), respectively. Additional details are given on colchicine treatment for converting haploids to doubled haploids (DH's) and on the frequency of spontaneous DH's among untreated plantlets. Disparate genetic ratios of TMV-resistant to TMV-susceptible plants were obtained among colchicine-treated haploid plantlets, induced DH's and untreated haploids when compared with F₂ and BC₁ progenies. Haploids (gametes) with the gene for TMV resistance occurred more frequently than expected and plantlets with the gene for RK resistance occurred less frequenctly than expected. Transmission of the gene for PVY resistance differed only slightly from Mendelian expectations. These unexpected ratios, in addition to the frequent occurrence of plastid chimeras among anther-derived plantlets, strengthened our conviction that haploidy is somehow associated with mutation.Joint contribution from the Departments of Genetics, Crop Science and Plant Pathology, North Carolina State University, and the Tobacco Research Laboratory, Agricultural Research, Science and Education Administration, U.S. Department of Agriculture, Oxford, North Carolina. Paper No. 5576 of the Journal Series of the North Carolina Agricultural Experiment Station, Raleigh, North Carolina.     

温室黄瓜根结线虫病非化学防治技术研究初报

采用大田与室内相结合的方法，研究了高温闷棚、低温冷冻、轮作倒茬、淹水等不同绿色防治技术措施对温室黄瓜根结线虫病的防治效果。结果表明低温冷冻法对温室黄瓜根结线虫病具有显著的防治效果，适宜在冬季温度低于-15℃，且持续20d以上的地区推广应用。黄瓜与棉花、大葱和大蒜轮作切断根结线虫的食物链，减轻根结线虫的危害。淹水法虽然对根结线虫病有较好的防治效果，但在缺水和保水性能比较差的垆土和黄绵土的北方地区推广应用受到很大限制。高温闷棚法对根结线虫病的防治效果最好，高温闷棚8d对根结线虫病的防治效果达到100％，闷棚后第3年防治效果仍高达96．2％。完全能替代化学药剂防治，可操作性强，成本低，协调了根结线虫病的防治与温室绿色食品黄瓜生产的矛盾。