Fluvial sediments in the Alagxa Plateau as a dust source: iron mineralogical and geochemical evidence

The Alagxa Plateau, in the margin of the northeastern Tibetan Plateau, is one of the most important dust source areas in East Asia, and the widespread sandy desert in the area is important both as a reservoir and a source of eolian silty. The northeastern margin of the Tibetan Plateau is one of the most actively-growing mountain belt on earth, and has large amounts of debris, with masses of fine grained material, which were continuously mobilized and deposited in the Alagxa Plateau by rivers, forming broad alluvial fans. It is possible that the role of fluvial sediments as a source of silty dust in the Alagxa Plateau has been underestimated. In this study, we test this hypothesis by investigating the iron mineralogical and geochemical characteristics of the fluvial sediments and the surface material of the sandy desert in the Alagxa Plateau, and comparing them with paleo-eolian dust deposits(loess) in the adjacent Chinese Loess Plateau(CLP) to investigate the possible linkages among the fluvial sediments, sandy desert and the last glacial loess of the CLP. The results show that sandy desert typically have high contents of goethite, and high ratios of goethite to hematite, similar to the fluvial sediments in the Alagxa Plateau. Based on the major element characteristics, field investigations and the results of previous studies, we found a genetic link between the silt component of the fluvial sediments and the sandy desert in the Alagxa Plateau with high value of Gt(goethite) and similarity of the Gt/(Hm(hematite)+Gt) ratio. But the silt component of the sandy desert main come from the adjacent fluvial sediments. The iron mineralogical characteristics(χ(magnetic susceptibility), χARM(anhysteretic susceptibility), SIRM(saturation isothermal remanent magnetization) and SIRM_(AF100 mT)(SIRM demagnetized at 100 mT)) of the CLP samples overlap with those of the fluvial sediments in the Alagxa Plateau, but there is a mismatch with the sandy desert samples. This suggests that the fluvial sediments are the source of a large amount of silty material which could be transported to the CLP. Therefore, we conclude that the fluvial sediment in the Alagxa Plateau is an important source of eolian silt, which is deposited in downwind region, and that this source has been previously underestimated.     

pH对吉林西部低平原湖泊底泥氟释放影响的实验研究

针对吉林西部低平原底泥中氟含量较高的花敖泡、道字泡、大布苏泡进行实验,通过底泥中氟长期释放实验(28 d)和不同pH对底泥氟释放影响的研究,得出高氟湖库底泥氟的释放量为37.31～223.03 mg/kg;碱性环境下底泥氟向水中迁移的速率在1.88～22.53 mg/(kg·d);酸性环境中释放的速率0.71～5.41...     

A Novel Particle Contact Assay with the Yeast Saccharomyces cerevisiae (8 pp)

Goal, Scope and Background   Numerous xenobiotics released into surface waters are transferred to suspended particulate matter and finally attached to sediments. Aquatic organisms may be exposed to them by direct particle feeding, by physical contact with contaminated surfaces as an exposure route, and by the uptake of dissolved contaminants after equilibration via the free water phase. In order to assess potential sediment toxicity, each of these exposure routes has to be addressed. This paper presents a newly developed particle contact assay that uses the fermentation performance of a specific Saccharomyces cerevisiae strain for the assessment of toxic effects in sediments. The test procedure is based on the characteristic feature of growing yeast cells to attach to sediment particles, which are also relevant for the accumulation of contaminants. The physical contact with lipophilic contaminants mirrors an exposition pathway for the direct uptake into the cells. In order to quantitatively characterize the toxic effects of particle attached pollutants on the fermentation performance, unpolluted native reference sediment was spiked with representatives for widely distributed anthropogenic contaminants. Methods   Saccharomyces cerevisiae was established as sensitive eukaryotic microorganism for the ecotoxicological assessment of particle attached anthropogenic contaminants in freshwater sediments. For this purpose, yeast cells were cultivated in sediment samples and the resulting fermentation performance was continuously measured. Sediments artifically spiked with HCB, PCB, g-HCH, DDT, and benzo(a)pyrene and solutions of each contaminant were comparatively investigated by means of their adverse effects on yeast fermentation performance. Additionally, four native river sediments characterized by increasing levels of pollution were assessed by the yeast particle contact assay, and simultaneously by standard aquatic tests with algae, daphniae, and luminescent bacteria using pore water and elutriates. Results of the bioassays were related to specific sediment contamination with respect to metals and organic priority pollutants. Results and Discussion   In sediments spiked with PCB and benzo(a)pyrene fermentation, performance was affected extensively below concentrations inhibiting fermentation in contaminant solutions. This suggests a high efficiency of the exposure route by physical contact. The fermentation performance was only slightly affected by single lipophilic pollutants, whereas mixtures of individually spiked sediments caused critically reduced fermentation performance suggesting additive synergistic effects. Native river sediments modestly to critically polluted by hazardous organic compounds lead to a slightly to dangerously reduced fermentation performance in the yeast contact assay. These inhibitory effects were much less pronounced in the standard bioassays conducted with algae, daphniae and luminescent bacteria, applying pore waters and elutriates as sample matrices. Using pore water, inhibition was measured only in the most polluted sediment, elutriates lead to a slight inhibition of the algal growth in the undiluted sample only. These results indicate an improved sensitivity of the yeast particle contact assay compared to the standard assays, due to uptake and physical cell contact as additional routes of exposure. Conclusion   The yeast particle contact assay is a valuable tool for the assessment of ecotoxicological potential in freshwater sediments. Since the assay addresses physical contact as an exposure route, it indicates bioavailability of lipophilic compounds in sediments. Outlook   The sensitive indication of bioavailable contaminants associated to sediment particles by the newly developed yeast particle contact assay recommends it as a complementary microbial bioassay in a test battery for assessing major pathways of contaminants in whole sediments.     

Metal uptake in maize, willows and poplars on impoldered and freshwater tidal marshes in the Scheldt estuary

Foliar Cd and Zn concentrations in Salix, Populus and Zea mays grown on freshwater tidal marshes were assessed. Soil metal concentrations were elevated, averaging 9.7 mg Cd kg^?1 dry soil, 1100 mg Zn kg^?1 dry soil and 152 mg Cr kg^?1 dry soil. Cd (1.1–13.7 mg kg^?1) and Zn (192–1140 mg kg^?1) concentrations in willows and poplars were markedly higher than in maize on impoldered tidal marshes (0.8–4.8 mg Cd kg^?1 and 155–255 mg Zn kg^?1). Foliar samples of maize were collected on 90 plots on alluvial and sediment‐derived soils with variable degree of soil pollution. For soil Cd concentrations exceeding 7 mg Cd kg^?1 dry soil, there was a 50% probability that maize leaf concentrations exceeded public health standards for animal fodder. It was shown that analysis of foliar samples of maize taken in August can be used to predict foliar metal concentrations at harvest. These findings can therefore contribute to anticipating potential hazards arising from maize cultivation on soils with elevated metal contents.     

First data on the coastal dynamics and the sedimentary characteristics of the area influenced by the River Irminio basin (SE Sicily)

The various lithological outcrops in the drainage basin of the River Irminio are described for their contribution to the riverborne material and therefore to the sedimentary balance of the coastal strip. The main contribution to the present sedimentary balance of the subaqueous delta cannot be attributed to the River Irminio, owing to the extreme difference between fluvial and marine sediments. The river's hydraulic characteristics have not always been constant but have tended to decrease in three stages: the first, with a strong competence, shown by the Quaternary alluvial sediments with pebbles; the second, up to 1985, of medium competence, shown by sandy-gravelly deposits in the coastal strip and by finer sediments in the distal areas; the third, at the present day, with low competence, shown by a prevalently suspended load sediment with practically no fluvial influence and with a sedimentation dominated by the littoral currents; this is because between the 1960s and 1970s, owing to interventions along the river channel, the sediments from the basin were reduced to the point of non-existence and a new sedimentary cycle was set up on the delta with allochthonous sediments, exclusively made up of quartz clasts, whereas in the distal zones the mineralogical and compositional characteristics of the ancient river mouth were maintained.     

Partitioning characteristics of PAHs between sediment and water in a shallow lake

Goal, Scope and Background

Distribution of hydrophobic organic contaminants in abiotic compartments is essential for describing their transfer and fate in aquatic ecosystems. Taihu Lake is the third largest freshwater lake in China. Water quality of Taihu Lake has deteriorated greatly during the last decades and has threatened the water supply. The aim of the present study was to investigate the partitioning of polycyclic aromatic hydrocarbons (PAHs) among overlying water, suspended particulate matter (SPM), sediments, and pore water in Meiliang Bay, Taihu Lake and to provide useful information for the ecological engineering in this area.

Materials and Methods

Overlying water and surface sediment were sampled from six sites in Meiliang Bay, Taihu Lake, China. Within 72 h of sampling, sediments were centrifuged to obtain the pore water. Overlying water samples were filtered to separate dissolved and SPM samples. After extraction, samples were purified following a clean-up procedure. PAH fraction was obtained by elution with a mixture of hexane: DCM (7:3, V/V) and analyzed by GC/MS.

Results

PAHs concentrations in overlying water varied from 37.5 ng/L to 183.5 ng/L. Concentrations of PAHs in pore water were higher than those in overlying water. The total concentrations of 16 priority PAHs in sediments ranged from 2091.8 ng/g-dw to 4094.4 ng/g-dw. PAHs concentrations on SPM were decreased with suspended solid concentrations (SSC). Total PAHs concentrations on SPM varied in the range of 3369.6 ng/g-dw to 7531.1 ng/g-dw. The partition coefficients between sediment and overlying water (log K _oc) for PAHs with log K _ow<5 were positively correlated with their octanol-water partition coefficients (log K _ow) (n=39, r=0.79, p<0.0001). Partition coefficients between sediment and pore water (log K _oc′) for all PAHs were also significantly correlated with their log K _ow values (n=48, r=0.82, p<0.0001).

Discussion

In general, PAHs derived from combustion sources tend to bind strongly to soot particles in natural sediment. Consequentially, K _oc values observed in the natural environment could be orders of magnitude higher than those predicted by linear correlation relationships under laboratory conditions. In the present study, the ratio of log K _oc values to log K _ow values falls consistently above 1, indicating that the sediment soot carbon in the bay was more attractive for PAHs than n-octanol. The log K _oc′ was also higher than that predicted under laboratory conditions, suggesting that the measured pore water PAH concentrations were lower than those predicted. That is to say, not all the sediment PAHs can be available to partition rapidly into sediment pore waters. A variation in soot content is a possible reason. Furthermore, concentrations of PAHs on SPM were higher than those in sediments. The compositions of PAHs on SPM and in sediments were similar, indicating the importance of re-suspension process of sediments in the partitioning process of the shallow lake.

Conclusions

The results indicated the equilibrium partitioning model could be used to predict PAHs distribution in various phases of a shallow lake in the stagnation period, but re-suspension processes should be considered to modify the relationship between log K _ocs and log K _ows.

Recommendations and Perspectives

Concentration, particle size and composition of resuspended particles could affect the relationship between log K _ocs and log K _ows. Further work should be done under field conditions, especially where a steady thermodynamic equilibrium state could be assumed.

     

Harmonisation, standardisation for soil and sediment fractionation studies, and usefulness in assessment and risk management

Single and sequential extraction procedures are often used to study the environmental fate of trace elements from soils and sediments. Although these schemes are quite popular, they are prone to various sources of errors, which require them to be thoroughly controlled. Owing to their operationally-defined character, the only way to compare analytical data is to stick closely to procedures that have been collaboratively studied and written in the form of an operating protocol. Groups of scientists have hence developed ‘harmonised’ procedures that are used as a reference for fractionation studies. A higher level is the formal standardisation of the procedures by official standardisation bodies, which also fulfils the need for achieving the comparability of data obtained by different laboratories from different countries. This paper discusses aspects of harmonisation (consensus obtained by groups of scientists) and standardisation (adoption of standards as mandated by an international organisation) as applied to single and extraction schemes for trace element fractionation studies, including quality control aspects.     

不同规格鱼鳞坑坡面侵蚀过程及特征研究

探究不同雨强下鱼鳞坑措施的坡面侵蚀规律及特征,对进一步明晰该措施的径流泥沙调控机制具有重要意义。该研究采用小区模拟降雨试验,研究3种雨强(40,70和100 mm/h)条件下2种规格鱼鳞坑坡面的蓄水保土效益及侵蚀过程,并探讨鱼鳞坑坡面水沙特征及其与细沟形态之间的关系。结果表明,鱼鳞坑的径流泥沙调控作用明显但也存在阈值,在措施被冲垮前,各处理减流效益和减沙效益分别为66.02%~82.20%和85.77%~91.91%;平均径流强度和输沙速率分别为平整坡面的18.87%~33.21%和10.04%~15.38%;当鱼鳞坑被冲垮后,坡面产流量和产沙量分别为平整坡面的1.00~1.22倍和1.39~3.53倍,其平均径流强度和输沙速率分别为鱼鳞坑冲垮前的4.60~7.46倍和13.70~16.75倍。鱼鳞坑坡面径流含沙率在措施冲垮前后的差异较大,水沙关系线性拟合的斜率在措施被冲垮前为0.020和0.035,而冲垮后斜率为0.205和0.231,同时坡面总产沙量和峰值产流产沙量与细沟形态显著相关。因此,鱼鳞坑措施对坡面产流产沙特征及形态的影响在其调控阈值前后有较大差异。研究可为鱼鳞坑坡面水土流失的研究可为区域水土保持措施配置及管理提供相应的依据。     

末次间冰期-冰期旋回黄土环境敏感粒度组分的提取及意义

采用粒级-标准偏差方法对黄土高原西部、河西走廊及河南西部等6个剖面末次间冰期-冰期旋回的黄土-古土壤粒度进行了系统分析，提取了对环境变化敏感的粒度组分。各剖面的环境敏感粒度组分主要分为粗细两个组分，并显示出一定的区域性差异和不同的沉积学意义。敏感组分主要受物源和沉积后成壤作用的影响：冰沟和罗家湾剖面可能受源区的影响更大而使敏感组分偏粗，暖和湾和扣马剖面可能由于后期风化的影响较大而使敏感组分偏细。对扣马剖面末次冰期旋回堆积的L1和S1的粒级一标准偏差分析表明，L1的敏感组分与全剖面相似；而S1的敏感组分与全剖面存在较大差异，可能与成壤作用有关。     

Bioassay-directed Fractionation of Organic Extracts of Marine Surface Sediments from the North and Baltic Sea - Part II: Results of the biotest battery and development of a biotest index (8 pp)

-

Part I: Determination and identification of organic pollutants Part II: Results of the biotest battery and development of a biotest index

-

Preamble. This series of two papers presents the results of an interdisciplinary research project (ISIS) dealing with bioassay-directed fractionation of marine sediment extracts. Part I presents the extraction and fractionation procedure as well as the results of chemical analysis, including non-target analysis of sediments. Part II describes the results of the biotest battery in relation to chemicals possibly causing parts of the observed effects. A biotest index is used to compare the toxicities of the samples.

-

AUTHORS / AFFILIATIONS Ninja Reineke (3), Werner Wosniok (4), Dirk Danischewski (1), Heinrich Hühnerfuss (3), Angelika Kinder (5), Arne Sierts-Herrmann (5), Norbert Theobald (2), Hans-Heinrich Vahl (6), Michael Vobach (1), Johannes Westendorf (6) and Hans Steinhart (5).

-

(1) Federal Research Centre for Fisheries, Institute for Fishery Ecology, Palmaille 9, 22767 Hamburg, Germany (2) Federal Maritime and Hydrographic Agency, Bernhard-Nochtstr. 78, 20359 Hamburg, Germany (3) University of Hamburg, Institute for Organic Chemistry, Martin-Luther-King-Platz 6, 20146 Hamburg, Germany (4) University of Bremen, Institute of Statistics, Bibliothekstr. 1, 28334 Bremen, Germany (5) University of Hamburg, Institute for Food Chemistry, Grindelallee 117, 20146 Hamburg, Germany (6) University of Hamburg, University Hospital Hamburg-Eppendorf, Department for Toxicology, Vogt-Kölln-Str. 30, 22527 Hamburg, Germany (7) Eurofins Wiertz-Eggert-Jörissen, Stenzelring 14b, 21107 Hamburg, Germany

Goal, Scope and Background

The ecological relevance of contaminants in mixtures is difficult to assess, because of possible interactions and due to lacking toxicity data for many substances present in environmental samples. Marine sediment extracts, which contain a mixture of environmental contaminants in low concentrations, were the object of this study. The extracts were investigated with a set of different biotests in order to identify the compound or the substance class responsible for the toxicity. For this goal, a combination of biotests, biotest-directed fractionation and chemical analysis has been applied. Further on, a strategy for the development of a biotest index to describe the toxicity of the fractions without a prior ranking of the test results is proposed. This article (Part II) focuses on the biological results of the approach.

Methods

The toxicological potential of organic extracts of sediments from the North Sea and the Baltic Sea was analyzed in a bioassay-directed fractionation procedure with a set of biotests: luciferase reporter gene assays on hormone receptor and Ah receptor, arabinose resistance test, fish embryo test (Danio rerio), comet assay, acetylcholinesterase inhibition test, heat-shock protein 70 induction, oxidative stress and luminescence inhibition test (Vibrio fischeri). The test results provided the basis for the calculation of a biotest index by factor analysis to compare the toxicity of the samples and fractions.

Results and Discussion

Results of 11 biotests on different fractionation levels of the samples were described and discussed with regard to the occurrence of contaminants and their toxic potentials. Polychlorinated biphenyls, polycyclic aromatic hydrocarbons, quinones, brominated indoles and brominated phenols were in the focus of interest. A biotest index was constructed to compare the toxic responses in the samples and to group the biotest results.

Conclusion

The procedure presented in this study is well suited for bioassay-directed fractionation of marine sediment extracts. However, in relatively low contaminated samples, high enrichment factors and sufficient fractionation is necessary to allow identification of low concentrations of contaminants which is required to link effects and possible causes. In the present case, the relation between substances and effects was difficult to uncover due to relatively low concentrations of pollutants compared to the biogenic matrix and to the remaining complexity of the fractions. The results, with respect to the brominated phenols and indoles in the samples, highlight the successful use of bioassay directed fractionation in the case of high concentrations and high toxicity.

Recommendation and Outlook

In general, it has been shown that a marine risk assessment requires focusing on the input of diffuse sources and taking into account the fact of mixture toxicity. Effects resulting from biogenic substances will make the assessment of the influence of anthropogenic substances even more difficult.