THE SIZE EFFECT OF THE FRACTURE ENERGY OF CONCRETE TESTED BY THREE POINT BENDING

This paper ainalyses the size effect of the fracture energy of concrete tested bythree point bending. It is shown that positive errors of test results of fracture energy increase,ornegative errors decrease with increasing of the specimen ize. The phenomenon is one of main causesresulting in the size effect of fracture energy.     

Energy Efficiency Analysis of Heating System in the Birdhouse

In this paper the problem of energy consumption and environment in the birdhouse is introduced and the reconstructive measures aiming at energy savings are recommended. The measures include the limitation of temperature region, reconstruction of the building envelop and using the sunny board at the south side of the birdhouse roof. Finally, the energy efficiency of the reconstructive project is estimated.     

Optimum Planting System for Energy Saving and Healthy Demanded

It is proved that planting is effective to improve environment both indoor and outdoor resulted from the functions of plants to clean air and save energy. So the contradiction between saving energy and comfort,healthy demanded by people can be solved by planting. The planting have being emphasized and expanded during recent years,but in the planting plan,just the function of beautifying the environment is concerned and the function of ecological and saving energy are neglected. The analysis on the ooptimum system of planting is to make the planting system as an organic composition in the effectiveness structure and space layout of the city. Based on the study on equivalent relation of different effects on environment, the optimum system of planting structure will be determined in order to achieve the integrated effects of planting on environment.     

Discussion about Saving Energy in Refrigeratory

Food refrigeration is regarded as a high energy consuming trade. Under the long period system of state operated enterprise,there are many phenomenons of ignoring energy management and wasting energy. Energy consuming is not very clear for production.Consuming in our country is far more than the international standard and there is a distance between the middle_westland and the eastland. As a enterprise that faces the international market,it is important for it to strength the management so that the cost can be reduced. Considering those phenomenons of ignoring energy management and wasting energy in refrigeratory at present, some measures such as improved the unreasonable operation process, strengthening the energy management and automation to realize automatizing operation are improved to reduce the cost for refrigeratory trades.     

基于KPCA-WLSSVM的建筑能耗预测模型

为降低建筑能耗影响因素间复杂相关性对模型性能的影响,建立了一种基于KPCA-WLSSVM的建筑能耗预测模型。利用核主元分析(KPCA)对输入变量进行数据压缩,消除变量之间的相关性,简化模型结构;进一步采用加权最小二乘支持向量机(WLSSVM)方法建立建筑能耗预测模型,同时结合一种新型混沌粒子群-模拟退火混合优化(CPSO-SA)算法对模型参数进行优化,以提高模型的预测性能及泛化能力。通过将KPCA-WLSSVM模型方法应用于某办公建筑能耗的预测中,并与WLSSVM、LSSVM及RBFNN模型相比,实验结果表明,KPCA-WLSSVM模型方法能有效提高建筑能耗预测精度。     

地源热泵技术在中国温室设施中的应用探讨

当前在中国温室设施中应用和推广地源热泵技术尚存在诸多不利因素,大大限制了该项技术在设施农业领域中的发展。为探寻合理的解决途径,对地源热泵空调系统的关键技术和其在中国的发展概况进行了相关的阐述和分析,并以中国农业大学上庄实验站已经建成使用的地下水式温室地源热泵空调系统为实例,介绍该系统的组成、工作流程、性能参数和使用情况,探讨温室地源热泵空调系统在推广和使用中可能出现的投资较高,长时间运行性能不稳定等问题,分析其原因并提出相应的对策建议。     

低能Ar+注入樱桃萝卜点点红种子后的生物学效应

选取樱桃萝卜点点红为材料,对低能Ar+离子注入其干种子后的生物学效应进行了研究。考察了其发芽率、成活率与低能Ar+注入剂量的关系,对低能Ar+注入点点红种子后其过氧化物酶(POD)的活性进行了测定,并对POD酶谱及酯酶(Est)同工酶酶谱进行分析。研究结果表明,不同剂量的低能Ar+注入都会引起种子发芽率、成活率及不同阶段的生长和发育产生变异;在1×1017Ar+/cm2与3×1017Ar+/cm2剂量之间点点红种子的发芽率随注入剂量的增加呈现出“马鞍型”曲线的变化趋势;成活率的变化规律与发芽率的变化规律基本一致;低剂量注入时,其POD活性随剂量的增加而升高;高剂量注入时,其POD活性随剂量的增加而降低。同工酶图谱中,POD在2.5×1017Ar+/cm2和3.0×1017Ar+/cm2增加一条酶带,且1.5×1017Ar+/cm2和3.0×1017Ar+/cm2高剂量注入时有缺失现象;酯酶(Est)在1.5×1017Ar+/cm2和3.0×1017Ar+/cm2剂量注入时酶带数增加,且变深。     

生物质与石英砂组成双组分混合物的流化特性分析

通过流化床转化生物质是获取生物质能的重要方法之一。为此,选用秸秆和稻壳两种生物质原料,分别与石英砂组成双组分混合体系,然后在冷态条件下,在小型流化床上采用降速法进行流化特性的实验研究。结果表明:在双组分混合物中,改变生物质的种类对流化效果几乎没有影响。当粒径相同时,影响流化效果的关键取决于石英砂在混合物中所占的比例;当石英砂所占比例低于混合物的60%时,混合体系基本不能实现流化,而当石英砂单独流化时,流化效果呈理想状态;当石英砂所占比例为80%以上时,双组分混合物均可实现正常流化,且流化效果无明显差别。最终的分析结论认为,生物质与石英砂组成双组分混合物流化时,石英砂在混合物中的比例不少于80%时就可以正常流化,这一结论也为生物质流化床转化过程中进料速率的选择提供了依据。     

生物质气体燃料概述与展望

论述了生物质气体燃料的种类以及生产各种气体燃料的相应技术及其国内外发展概况和存在问题.生物质气化方面国内外有产业化实例;生物发酵制氢大多数处于实验阶段,关键是培育高效产氢发酵菌种、进一步提高系统的产氢能力、降低生产成本;厌氧发酵制取沼气生产技术比较成熟,在其生产过程中不消耗其它能源、没有环境污染、而且可降解各种有机废弃物,是目前最有希望的生物质能源之一.     

LPG发动机控制系统抗干扰技术的研究与应用

对LPG(液化石油汽)发动机的电子控制系统进行抗干扰的设计与应用,以确保控制系统的工作稳定性和可靠性。为此,分析了干扰的不同种类、形式及其来源,并阐述了发动机控制系统的外部干扰和内部干扰;主要采取了减少干扰源,减少干扰从输入输出通道进入等措施,为抑制干扰起到决定作用。结果表明:该技术能有效地防止干扰,保证控制系统工作正常。