西葫芦新品种济葫2号的选育

济葫2号是以QL0133和QLO119配制而成的西葫芦一代杂交种,植株生长旺盛、株型紧凑、矮蔓、早熟、丰产,抗病毒病、白粉病、蔓枯病.瓜浅绿色,嫩瓜长20.0 cm,粗6.0 cm,粗细均匀、品质佳.每667 m2产量达6 500kg,适于早春茬、秋冬茬及越冬茬栽培.     

葡萄子油及原花青素研究与开发利用

综述了葡萄子油、葡萄子原花青素等天然产物的提取与保健作用的研究进展,原花青素的生物活性及药理研究的现状,葡萄子油成分分析方法和葡萄子,提取物中原花青素含量测定的方法;介绍了用超临界CO2萃取法制取高质量的葡萄子油和应用夹带剂提取葡萄子中的原花青素的方法。分析了葡萄子的综合开发的应用前景。     

Ca~(2+)-ATPase抑制剂对采后草莓呼吸速率和花青苷含量的影响

用Ca2+-ATPase抑制剂钒酸钠(SO)和曙红(EB)浸泡处理转红期草莓果实(cv.Darselect)后表明,2者能提高果实呼吸速率,迅速促进外层果肉的花青苷生成,增加其可溶性糖含量,髓部果肉的花青苷生成和可溶性糖的变化较慢,而对果实的失重率影响不大。因此,Ca2+-ATPase抑制剂具有促进果实成熟衰老的作用。     

大蒜新品种成蒜早2号和成蒜早3号的选育

成蒜早2号和成蒜早3号是从温江蒜的自然变异株中,经系统选育而成的早熟新品种.成蒜早2号从播种到蒜薹始收需153～180 d(天),平均单薹质量12.7 g,单头质量10.7 g,多数蒜头由6～9瓣组成,蒜瓣紧密抱握蒜薹轴,一般蒜薹和蒜头产量分别为340和350 kg·(667 m2)-1,抽薹比温江蒜早,抗寒力比温江蒜弱;成蒜早3号从播种到蒜薹始收需153～186 d(天),平均单薹质量和单头质量分别为14.5和12.0 g,多数蒜头由5～8瓣组成.一般蒜薹和蒜头产量分别为320和410kg·(667 m2)-1,抽薹比温江蒜早,抗寒力与温江蒜相当.     

黑鹳F2的人工孵化及育雏的研究

2001～2004年在齐齐哈尔市龙沙公园对黑鹳F2的5只雏鸟的人工孵化温度和湿度进行记录。并对人工育雏成活的雏鸟的一系列生长指标如：体重、体长、喙长、翅长、跗跖长和尾长等进行测量，探讨黑鹳体长、体重等生长指标生长变化规律。结果表明：黑鹳卵的前中期（1～29d）孵化温度为37．7℃，湿度为55％，后期（29～31d）出雏温度为37℃，相对湿度65％；育雏箱的温度前7d为37℃，以后以每天0．5℃幅度逐渐降低，箱内湿度保持在55％，20日龄后可在室温下饲养；黑鹳F2雏鸟各生长指标的增长呈Logistic曲线。     

鸡传染性腔上囊病病毒VP2基因在昆虫细胞中的表达

为了深入研究鸡传染性腔上囊病病毒（IBDV）VP2基因的结构和功能,利用Bac-to-Bac系统研制出含有VP2基因的重组杆状病毒rBac-VP2,将rBac-VP2感染Sf9细胞,并用抗IBDV VP2特异性单克隆抗体经间接免疫荧光试验检测,证实感染重组病毒Sf9细胞能高效表达IBDV VP2基因产物;Western-blotting分析结果表明,VP2基因表达产物的分子质量约为40 ku.     

H7N2禽流感病毒分离株血凝素蛋白全基因的序列分析

为进一步分析H7N2禽流感病毒（AIV）分离株血凝素（HA）基因的特性,参照已发表序列设计了1对引物,采用RT-PCR获得了1条约1.7 kb的DNA片段,测序后进行了同源性比较、HA基因系统发育进化树分析和氨基酸编码分析.结果表明,所测的2个分离株的HA基因全长1 664 bp,编码除信号肽以外的HA蛋白的全部544个氨基酸,其中包括HA1的323个氨基酸,HA2的221个氨基酸.2个分离株HA基因核苷酸序列的同源性为99.4%;与GenBank中AIV标准株A/Afri.Star./Eng-Q/983/79（H7N1）的同源性最高,分别为99.4%和99.0%;与美国A/Chicken/NewYork/13142-5/94（H7N2）株同源性很低（仅65.0%）,而与以色列、意大利H7N2 AIV的同源性较高（为96%～97%）;2个分离株在HA基因进化树中均处于H7亚型AIV的欧亚群系分支内.推导氨基酸的序列分析表明,其HA蛋白裂解位点的氨基酸序列为-GR-GLF-,仅包含1个碱性氨基酸（R-）残基,符合低致病力AIV的基因特征.     

Bcl-2 antisense oligodeoxynucleotide increases the sensitivity of HL60 and K562 cells to daunorubicin

AIM:To investigate whether the bcl-2 antisense oligonucleotide increases the sensitivity of HL60 and K562 cell lines to daunorubicin.METHODS:IC50 for HL60 and K562 was determined with MTT method, the expression levels of Bcl-2 protein were assayed by immunofluorescence using fluoresce isothiocyanate labeling. In addition, apoptosis was detected by morphological observation and flow cytometric analysis of DNA fragmentation.RESULTS:It was found that the two oligonucleotides directed against the coding region and the translation initiation of bcl-2 mRNA, combined respectively with daunorubicin, inhibited expression of bcl-2 protein, increased apoptosis in HL60 and K562 cells, and decreased IC50 of daunorubicin significantly (P＜0.05). Compared to the antisense oligonucleotide directed against the translation initiation of bcl-2 mRNA, the antisense oligonucleotide directed against the coding region showed stronger effects in the aspects of increasing the sensitivity of HL60 cells to daunorubicin (P＜0.05).CONCLUSIONS:These two antisense sequences in the translation initiation and the coding region of bcl-2 mRNA increased the sensitivity of HL60 and K562 cell lines to daunorubicin in a sequence-specific manner.     

田间菜蛾绒茧蜂对有机磷敏感性监测及毒理机制分析

对甲胺磷敏感性的田间监测结果显示,绒茧蜂存在着抗性演化,毒力生物测定结果与AChE的K_i值的监测结果呈明显的相关性,每年9月至次年2月期间AChE敏感性最低,8月期间敏感性最高。甲胺磷可显著地抑制绒茧蜂AChE、CarE和GSTs的活性。PB和TPP对AChE的活体抑制率极低,但PB可强烈抑制CarE的活性,而TPP仅在高浓度时对CarE有较显著的抑制作用,PB对甲胺磷有显著的增效作用,而TPP对甲胺磷无增效作用。AChE的K_m、V_(max)及K_i值研究结果表明,田间绒茧蜂对有机磷和氨基甲酸酯的抗性与AChE对杀虫剂的不敏感性有关。由此认为,绒茧蜂对有机磷的抗性主要与其最重要的靶标酶AChE的敏感性改变及多功能氧化酶有关。     

Using laser to measure stem thickness and cut weed stems

Summary Stem thickness of the weed Solanum nigrum and the crop sugarbeet was determined with a He–Ne laser using a novel non‐destructive technique measuring stem shadow. Thereafter, the stems were cut close to the soil surface with a CO₂ laser. Treatments were carried out on pot plants, grown in the greenhouse, at two different growth stages, and plant dry matter was measured 2–5 weeks after treatment. The relationship between plant dry weight and laser energy was analysed using two different non‐linear dose–response regression models; one model included stem thickness as a variable, the other did not. A binary model was also tested. The non‐linear model incorporating stem thickness described the data best, indicating that it would be possible to optimize laser cutting by measuring stem thickness before cutting. The general tendency was that more energy was needed the thicker the stem. Energy uses on a field scale are discussed.