松木粉／聚醚砜树脂复合材料的制备及选择性激光烧结试验

以松木粉、聚醚砜树脂为材料,用SHR－10A型高速混合机制备松木粉／聚醚砜树脂复合粉末;用HRPS－ⅢA型激光粉末烧结快速成型机,遴选出复合粉末可用于选择性激光烧结工艺参数及适宜的预热温度,烧结成型。测量了不同松木粉质量比对复合粉末力学性能的影响,观察并测量了输入不同的能量密度时,烧结试件的成型效果和力学性能。结果表明：随着松木粉质量比的增加,木塑复合材料的力学性能降低。对于松木粉质量比为20％的木塑复合粉末,当输入的能量密度为0．128 J／mm3时,复合粉末即可成型;当输入的能量密度为0．312 J／mm3时,木塑复合材料的拉伸强度达到4．8465 MPa,弯曲强度为8．2152 MPa,冲击强度为1．2574 MPa,此时力学性能最强;若输入的能量密度大于0．312 J／mm3时,出现过烧现象,力学性能下降。采用扫描电镜对烧结件断面的形貌进行了表征。     

能源草发酵产沼气的研究进展

针对当前世界能源的利用情况,分析了能源草经厌氧发酵生产生物质能——沼气的可行性,并从能源草的资源收集及培育、原料草种植及收获、原料预处理、微生物接种物类别、发酵条件控制以及气体成分分析等6个方面综述了国内外的研究进展,并对其发展前景做出展望。     

Effect of temperature on growth and energy budget of juvenile cobia (Rachycentron canadum)

Growth and energy budget of juvenile cobia (initial body weight ∼ 22 g) at various temperatures (23, 27, 31 and 35 °C) were investigated in this study. Maximal ration level (RL_max, %/day) increased as temperature (T, °C) increased from 23 °C to 31 °C but decreased at 35 °C, described as a quadratic equation: RL_max = −0.023T² + 1.495T − 17.52. Faecal production (f, mg g^− 1 day^− 1) increased with increased temperature (T, °C), described as a power function: lnf = 0.738lnT − 0.806. As temperature increased, feed absorption efficiency in dry weight (FAE_d, %), protein (FAE_p, %) and energy (FAE_e, %) all increased first and then decreased, but the variation of feed absorption efficiency was small, with ranges of 89.59-91.08%, 92.91-94.71%, 93.92-95.32%, respectively. Specific growth rate in wet weight (SGR_w, %/day), dry weight (SGR_d, %/day), protein (SGR_p, %/day) and energy (SGR_e, %/day) showed a domed curve relative to temperature (T, °C), described as quadratic equations: SGR_w = − 0.068T² + 3.878T − 50.53, SGR_d = − 0.079T² + 4.536T −59.64, SGR_p = − 0.084T² + 4.783T − 63.08 and SGR_e = − 0.082T² + 4.654T − 60.99, and SGR_w, SGR_d, SGR_p and SGR_e maximized at 28.5 °C, 28.6 °C, 28.4 °C, 28.5 °C, respectively, as calculated from the regression equations. The relationships between feed conversion efficiency in wet weight (FCE_w, %), dry weight (FCE_d, %), protein (FCE_p, %), energy (FCE_e, %) and temperature (T, °C) also took on a domed curve described as quadratic equations: FCE_w = − 0.726T² + 39.71T − 473.8, FCE_d = − 0.276T² + 15.31T − 190.6, FCE_p = − 0.397T² + 22.05T − 277.9 and FCE_e = − 0.350T² + 19.39T − 239.9, and FCE_w, FCE_d, FCE_p and FCE_e maximized at 27.4 °C, 27.8 °C, 27.7 °C and 27.7 °C, respectively, as calculated from the regression equations. Energy budget of juvenile cobia fed satiation was 100C = 5F + 67(U + R) + 28G at water temperature 27 °C and 100C = 5F + 70(U + R) + 25G at water temperature 31 °C, where C is food energy, F is faeces energy, (U + R) is excretion energy and metabolism energy, and G is growth energy.     

中国对虾幼体的能量代谢

近年来中国对虾(Penaeus orientalis)工厂化育苗技术的进步,已能使海捕亲虾与养殖越冬亲虾在人工控制的条件下产卵,然而虾卵孵化之后能否健壮地生长以及如何提高变态存活率,幼体的饵料起着关键的作用。生物饵料虽然效果好,但受到培养技术及设备等条件的限制,因此,目前育苗生产中的饵料仍以豆浆、蛋黄为主,辅以少量的生物饲料与配合饵料,以致幼体的抗病力差,变态存活率低。所以研究适合于中国对虾幼体营养需求的配合饵料很重要。至今有关日本对虾幼体营养的研究屡见报导,而中国对虾幼体的营养研究还未有报导。对虾营养的研究方法有分析虾体成分、梯度或正交法设计饲料试验以及能量代谢试验等。周洪琪(1990)通过能量代谢研究中国对虾亲虾的营养。Harris(1959)、Conover     

馈能型车辆主动悬架技术

在车辆底盘悬架系统中,馈能型车辆主动悬架的发展已受到关注,其功能是在提高车辆行驶平顺性的同时尽可能地回收由不平路面激励引起的悬架系统振动能量,以减少主动悬架的能耗.本文首先对近年来馈能型车辆主动悬架的发展和研究进行了全面回顾,然后着重对电磁式馈能悬架进行了总结,最后对电磁式馈能悬架的核心问题进行了分析.随着电磁技术的日趋成熟,电磁式馈能悬架将会具有良好的发展前景.     

Strahlungsnutzung durch Bestände ölreicher Körnerfruchtarten — Winterraps, Öllein und Sonnenblume im Vergleich

Radiation use by oil seed crops — a comparison of winter rape, linseed and sunflower For the production of grain crops rich in oil, winter rape, linseed and sunflower are similarly suitable at many arable locations. We wanted to compare the extent to which radiation (PAR) is intercepted and utilized by the individual species for dry matter and yield production. For this purpose, a 2‐year field experiment comprising the factors genotype, N fertilization and soil tillage was conducted. For five phases of crop development, growth rates (CGR, RGR and NAR) and PAR utilization were calculated. At full ripeness, total dry matter, grain, oil and energy yields, the crop‐ and year‐specific PAR supply, its interception and utilization for dry matter production and the resulting energy binding were determined. Due to the different individual vegetation periods, the PAR supply of the crops differed. The crop assimilation areas also differed, with values for winter rape and sunflower higher than those for linseed. The yield productivity of winter rape and sunflower was also higher than that of linseed. N fertilization increased yield to different extents for the different crops. On average, winter rape and sunflower produced the same amounts of dry matter and energy yield. Due to a higher harvest index, sunflower had the highest grain yield, and because the oil concentration in grain was comparatively high sunflower produced the highest oil yield, too. Under cool and wet climate conditions, however, the productivity of sunflower is offset by a relatively high yield risk because of uncertain ripening. The highest PAR utilization by linseed did not compensate for its very short vegetation period in combination with the lowest PAR interception.     

4115TA_1涡流室式柴油机燃烧室节能改造的试验研究

本研究基于前期研究基础,将4115TA1柴油机涡流室的主燃烧室设计成不对称结构,并在喷油嘴端部加装碰撞挡块,进一步优化涡流室容积比、通道截面、通道倾角的设计;利用正交试验方差分析,给出各影响因素的主次关系,得到了涡流室顶部凹坑不对称容积比和通道倾角对燃油消耗率及烟度排放的影响效果,实现了比原机在标定工况下燃油消耗率的降低及炭烟排放的改善。     

Including public-health benefits of trees in urban-forestry decision making

Research demonstrating the biophysical benefits of urban trees are often used to justify investments in urban forestry. Far less emphasis, however, is placed on the non-bio-physical benefits such as improvements in public health. Indeed, the public-health benefits of trees may be significantly larger than the biophysical benefits, and, therefore, failure to account for the public-health benefits of trees may lead to underinvestment in urban forestry. In addition, the distribution of trees that maximizes bio-physical benefits may not maximize public-health benefits.     

人造板企业减少锅炉SO2排放的途径

介绍了减少锅炉SO2排放的基本途径与主要方法,重点分析了这些方法在人造板企业的适用性.     

Morphological responses of bedding plants to three greenhouse temperature regimes

Seedling crops of gazania, geranium, marigold, mimulus, pansy, verbena and vinca were grown to 60% anthesis in three greenhouse temperature regimes: (a) 26 °C day/6 ± 3 °C night (LT), with a 16.5 °C mean daily temperature (MDT), (b) 26 °C day/17 ± 4 °C night, with a 21 °C MDT, and (c) variable day/night temperatures in response to heating and cooling by a phase change material energy storage module (PCM) with an 8 ± 2 °C night and a 16 °C MDT. Crops bloomed from 2 to 17 days earlier in the 26 °C/17 °C greenhouse. The morphological characteristics of all cultivars of gazania, mimulus, pansy and verbena, geranium and vinca were similar regardless of greenhouse temperature regime. Marigold diploid and triploid cultivars and mimulus were morphologically more variable than the other bedding plant species. Crops grown in the PCM and LT greenhouses had virtually identical morphological characteristics and bloomed in about the same number of days. Plant height was not affected by DIF environments in the greenhouses. The PCM and LT greenhouses had a similar MDT, but the distribution of numbers of hours of mean daily temperatures was different.