Thermal features,ambient temperature and hair coat lengths: Limitations of infrared imaging in pregnant primitive breed mares within a year

Infrared thermography is a non-invasive technique which allows to distinguish between pregnant and non-pregnant animals. Detecting accurate body surface temperatures can be challenging due to external factors altering thermograph measurements. This study aimed to determine the associations between the ambient temperature, the hair coat features and the temperatures of mares' abdomens. It compared pregnant and non-pregnant mares throughout 11 months. The research was carried out on 40 Konik Polski mares, which were divided into pregnant and non-pregnant groups. The temperature (Tmax, maximal; Taver, average; Tmin, minimal) of the mares' abdomen was evaluated in two regions of interest: the whole area of the lateral surface of the mares' abdomen (Px1) and the flank area of the lateral surface of mares' abdomen (Px2). During the increasing period, the slopes in the linear regression equation did not differ significantly for ambient (Tamb) and surface temperatures in both groups. In the decreasing period, the slopes did not differ significantly for Tamb and Tmax in the non-pregnant group. They also did not differ for Tamb and Taver in Px1 and Tamb and Tmin in Px1 in both pregnant and non-pregnant groups respectively. Other slopes varied significantly (p < .001). There was no evidence of parallel changes in hair coat features and measured temperatures. The flank area appears more suitable for thermal imaging in pregnant mares due to the seasonal fluctuations in hair coat lengths.     

电车接触网腕臂的计算

电气化铁道的“三大元件”分为接触网、电力机车和牵引变电所。本论文论述时速200Km/h高速电气化铁路的接触网电车接触网腕臂的计算,接触网的计算精确程度就关系到接触线悬挂的可靠程度,故接触网计算是设计中基础的工作内容,其计算主要分为腕臂的计算和接触网的负载计算。文章详细分析了腕臂长度的计算方法,重点介绍了路基曲线区段腕臂长度、转换柱和中心柱腕臂长度的计算。     

Study on Length Polymorphism of KAP1 Family Genes in Yak (Bos gurnniens)

This study was aimed to understand the characteristics of length polymorphism with repeat sequence of keratin associated protein 1 (KAP1) family genes in yak. KAP1 family genes of yak and cattle were sequenced, and compared with sheep KAP1 family gene sequences. The results showed that cattle KAP1 family genes were located in chromosome 19, according to location of sheep KAP1 family genes in the chromosome and similarity with cattle KAP1 family genes, renaming the cattle KAP1 family (according to the gene location of chromosome) B2D, B2A, KAP1-1 and B2C genes into KAP1-4, KAP1-1, KAP1-2 and KAP1-3 gene, respectively. KAP1 family genes in the 3'and 5' flank were highly conserved, the difference between family genes mainly in the the repeat sequence region, which yak KAP1 to KAP4 genes were found 30 bp length polymorphism. There were B(CCQTS)A₁(CCQPT) repeat sequence and a new repeat sequence C(SIQTS). The results indicated that the repeat sequence was the key of the polymorphism of KAP1 family genes, which might be relate to combination with keratin protein.     

覆盖方式对旱地小麦花后旗叶抗氧化生理及粒重形成的影响

于2017—2018年和2018—2019年,在西北中部旱作雨养农业区以冬小麦‘康庄974’为试验材料,设秸秆带状覆盖(SM)、地膜覆盖(PM)和无覆盖对照(CK)共3个栽培处理,分析不同覆盖方式对小麦灌浆期土壤水分和温度及抗氧化能力的影响,探讨花后干物质积累量和粒重形成的关系。结果表明,随生育期推进,花后旗叶相对含水量(RWC)逐渐降低,丙二醛(MDA)含量逐渐升高,且PM较SM降、升幅度明显。与CK相比,覆盖显著提高花后旗叶抗氧化酶活性,增加渗透调节物质含量;开花时间越长,SM抗氧化酶活性升高的幅度越大,而PM主要提高花后7 d旗叶抗氧化能力。SM和PM的粒重分别较CK增加14.3%和19.1%(P<0.05)。相关分析表明,土壤水分(SW)是影响旗叶生理活性的关键因子,提高SW,有利于增加RWC(r=0.84^**),从而提高旗叶抗氧化能力,其中RWC和抗坏血酸酶(ASA)活性呈极显著正相关关系(r=0.82^**);ASA活性和脯氨酸(Pro)含量呈极显著正相关关系(r=0.94^**),和MDA含量呈极显著负相...     

基于斜率比法评定断奶仔猪对不同铜源的相对生物学利用率

本试验旨在研究不同铜源（硫酸铜、碱式氯化铜和柠檬酸铜）和铜添加水平（20和30 mg/kg）对断奶仔猪生长性能、血清铜含量与含铜酶活性以及组织铜含量的影响,探讨断奶仔猪对不同铜源的相对生物学利用率。试验采用3×2双因子随机区组设计,选取平均体重为（8.98±0.48） kg的杜×长×大三元杂交断奶仔猪112头,随机分为7组,每组4个重复,每个重复4头猪。对照组饲喂玉米-豆粕型基础饲粮（铜含量为7.80 mg/kg）,各试验组分别在基础饲粮中添加20或30 mg/kg硫酸铜、碱式氯化铜或柠檬酸铜（均以铜含量计）。试验预试期3 d,正试期28 d。结果表明：1）试验组与对照组断奶仔猪平均日增重、平均日采食量和料重比均无显著差异（P>0.05）。2）饲粮铜源和铜添加水平对断奶仔猪血清铜含量具有显著影响（P<0.05）,但对血清铜蓝蛋白和铜锌超氧化物歧化酶活性均无显著影响（P>0.05）。3）饲粮铜源和铜添加水平对断奶仔猪肝脏铜含量具有显著影响（P<0.05）,但对心脏、肾脏、胰脏和跖骨铜含量均无显著影响（P>0.05）。4）根据多元线性回归斜率比法计算,以血清铜...     

基于点云数据的NURBS曲面重建研究

提出一种基于点云数据的NURBS曲面重建方法，针对数据点的分布不均匀性，进行非均匀B样条曲线控制点的反算，通过累积弦长法构造非均匀节点矢量，保证了曲面的插值精度和曲面重建的质量。     

Using of AFLP Marker to Predict the Hybrid Yield and Yield Heterosis in Rice

利用AFLP分子标记对46个水稻品种进行遗传多样性分析,继而研究分子标记遗传距离与按照NC设计获得的195个杂交组合的产量及特殊配合力的相关性,探讨预测杂种优势的可能性。结果表明:(1)通过UPGMA聚类分析(图3),可将供试材料分为16个类群,并把来源不明的品种(系)划分到相应类群中,从而对这些材料进行初步鉴定。可见,AFLP分子标记是检测类内品种间遗传差异的有效方法,为水稻品种(系)亲本选配提供理论依据。(2)分子标记遗传距离与杂种产量优势、F1产量、特殊配合力之间都呈显著正相关,相关系数介于0.3235-0.7713之间。但相关程度还不足以预测杂种优势。增效座位和减效座位以及使用与杂种优势有关的QTL连锁标记位点可能提高杂种优势的预测能力,但最终解决,将依赖于杂种优势遗传机理的研究。     

Solution the Polarization Field Strength inside Ellipsoid in a Homogeneous Dielectric

The solution of polarization field strength in ellipsoid and a homogeneous dielectric in condition of a constant external field is obtained with strict derivation and ellipsoidal coordinate. The conclusion that some textbooks given: the direction of polarization field strength with the direction of external field holds strict anti-parallel must be supplemented with additive certain conditions, otherwise it will not be correct. By means of the latticework and the step change calculation, the angle value of polarization vector with the external field is calculated and the changing situation about the angle value with the change of three half axes of ellipsoid is analysied.     

Experimental Study on the Extended Length of Negative Reinforcement Cut-in Phases in Continuous Beams

In this paper through the static loading tests of 6 inflexion zones and 2 cantilever zones in full-size constrained R/C beams, the stress performance in rebars cut-in-phases and subjected to negative moment is studied. The stress properties of extended length of rebars with different shear-span ratiosare analysed on basis of the full measurement of strain distributions combined with the investigation on state and regularity of the diagonal cracks development and series of new knowledge are obtained. It is found that current Concrete Design Code provisions on the extended length are inadequate for the high shear-span ratio and superfluous for the low shear-span ratio. The theoretical and experimental foundations are provided for determining proper value of extended length for rebars cut-in-phases.