不同粒度猫尾草对羔羊体外发酵特性和微生物数量的影响

通过Rusitec-s体外发酵系统研究不同粒度猫尾草对羔羊体外发酵参数与微生物数量的影响,选取6种不同粒度(1.00、2.36、3.35、4.75、8.00和12.50 mm)的猫尾草作为试验饲粮的纤维来源,按照猫尾草的粒度将试验分为6个处理组,每个处理4个重复,利用Rusitec-s型人工瘤胃模拟装置进行48 h体外发酵,测定养分降解率、发酵参数及发酵液中6种微生物菌群的拷贝数。结果表明：与其他处理组相比,2.36 mm组显著提高了体外中性洗涤纤维降解率(IVNDFD)、丁酸、异丁酸、戊酸、异戊酸摩尔比和溶纤维丁酸弧菌(B. f)数量(P<0.05),且显著降低总产甲烷菌(TMe)数量(P<0.05)。总菌(TB)与氨态氮(NH3-N)浓度、乙酸摩尔比呈正相关(R²=0.84,P=0.038;R²=0.88,P=0.021);B. f数量与丙酸摩尔比呈正相关(R²=0.82,P=0.045),且与pH呈负相关(R²=-0.98,P=0.001);TMe数量与体外粗蛋白质降解率(IVCP...     

Dropwise Condensation Heat Transfer Coefficient on the Horizontal Circular Surface with Radial Gradient Surface Energy

A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient.     

Design for Precision Measurement System Based on Machine Vision

It is difficult to measure the geometric quantity of small parts in finishing, assembling and measuring, because it's easy to break the workpieces' surface and alter their position by means of traditional contact measuring methods.There are some non contact measurers, such as,light feeler pin and interference microscope etc., because of it's high price and strict working conditions,so it's difficult to promote them in widely use. Precision measurement system based on machine vision has the advantages of non contact measuring as well as high performance and low price. Some problems, such as light source, algorithm of edge fitting, auto focusing,are discussed.     

THE SIZE EFFECT OF THE FRACTURE ENERGY OF CONCRETE TESTED BY THREE POINT BENDING

This paper ainalyses the size effect of the fracture energy of concrete tested bythree point bending. It is shown that positive errors of test results of fracture energy increase,ornegative errors decrease with increasing of the specimen ize. The phenomenon is one of main causesresulting in the size effect of fracture energy.     

Two-dimensional Optimum Cutting Stock Method Based on Internet and Its Implementing Technique

Two dimensional Optimum Cutting Stock is a NP complicated problem. Each of optimum software gets the cutting results by using proximate and heuristic methods. But different optimum methods and their optimum software may not realize perfect effect according to certain data framework. Furthermore, enterprises can not buy lots of optimum software to choose the most optimized plan. Because of such problems, this paper provides a two dimensional optimum cutting stock method based on Internet and offers the real implementing technique of such method. The experiments, show that this method promotes the general optimum effect of two dimensional optimum cutting stock greatly.     

The Monitoring Measurements and Country Rock Control of NATM in Tunnel of Express Road during Construction

In this paper the author' s study on the monitoring measurement technique of NATM,the regularity and conditions of the country rock deformation are analysed based on the site measurement data in the west section of Zhongliangshan tunnel. The regression analysis of measure data for different measure lines of vavious country rock is done by the use of self-compiled CRAP program. The stability criterion for various rockmass and optimum time for primary and permanent support are provided. The conclusion available could conduct the theoretical research of NATM deeply as well as tunnel design and construction.     

A STUDY ON HEAT AND MOISTURE STATE OF HULL LAYER FOR THERMAL INSTULATION OF A COLD STORAGE

This paper analyses the thermal moist characteristics of the hull layer beside an air layer at lower temperature in an envelope for a cold storage and presents a new method of waterproof by air layer. With test data from engineering practice, the theory on the barrier of self moisture proof at the surface sublayer of the hull layer in an attic on a cold storage is proven. The dried zone about three phase point is confirmed. It is a new knowledge for thermophysics on thermal design of a cold storage with an optimum thermal performance.     

大麦多数量性状相关分析

穗长、穗粒重两性对小区产量直接影响较大;每穗实粒数和每穗不实粒两性状数对小区产量直接影响很小,但通过其他性状对小区产量的间接负影响很大;每穗总粒数对小区产量直接负影响很大,株高通过其他性状对小区产量间接正影响很大。     

种子大小对冬小麦苗势及其幼穗发育的影响

以中大粒品种郑引1号为试验材料,研究了不同粒重种子对幼苗长势及幼穗发育的影响.结果表明,大粒种子出苗迟,生长发育快,叶片分化持续时间短,幼苗长势壮;大粒种子的幼穗发育开始早,分化强度大,形成小穗数多.茎生叶分化总数不因粒重不同而发生变化.