森林采运系统中原条流最优控制的研究

运用系统分析理论，揭示了森林采运系统中原条流具有时空性、连续性、服务性、可控性和经济性的特征。以与原条流量有关的生产和贮存费之和最小，组织原条运输和贮木场作业均衡生产为目标，运用现代控制理论建立了原条流宏观和微观控制的数学模型。通过实例证明了“两段式运材工艺”比“冬贮夏运（流）工艺”，具有显著的经济效益。     

长白落叶松人工林树冠形状的模拟

以长白山地区 2 6a生长白落叶松人工林为研究对象 ,采用枝解析的方法 ,测定了 2 5株林木 (直径 10 5～2 4 9cm)的树冠变量 ,并建立了预测树冠外侧形状的冠形模型。基于枝条着枝深度 (DINC)和林木变量所建立的树冠形状模型包括 :基径、枝长、着枝角度和弦长等预估模型。对于大小相同树木的主要枝条来讲 ,这些树冠变量是随着DINC的增加而增大 ;而林木的胸径 (DBH)和树高 (HT)变量很好地反映了不同大小树木的冠形变化。冠形预测模型预测效果良好 ,充分体现了树冠结构的变化趋势 :树冠形状在树冠的中上部呈抛物线体 ,而在树冠的下部则为近圆柱体。文中所建模型 ,可以合理地描述长白落叶松人工林的树冠形状及其变化规律。     

Morphological plasticity of cotton roots in response to interspecific competition with pecan in an alleycropping system in the southern United States

A study was conducted in northwest Florida, USA, to investigate root development and morphology of cotton (Gossypium hirsutum L.) under pecan (Carya illinoensis K. Koch) trees in an alleycropping experiment. Root:shoot ratio, root biomass, total root length and root length density were examined under three treatments: (1) barrier (separating belowground interspecific competition by trenching to a depth of 120 cm and installing polyethylene barrier), (2) non-barrier (root systems were free to interact), and (3) monoculture of cotton (without above and belowground interspecific competition with trees). Results indicated that plants in the barrier and non-barrier treatments had lower root:shoot ratios compared to the monoculture treatment. Belowground competition for resources between pecan and cotton in the non-barrier treatment resulted in 25 and 33% reduction of total root length (359 cm) when compared to that of the barrier (477 cm) and monoculture (539 cm) treatments, respectively. The non-barrier plants also exhibited the lowest root length density. Specific root length was highest for the monoculture (179 cm g⁻¹) and lowest for the non-barrier treatment (146 cm g⁻¹) with the barrier treatment being intermediate (165 cm g⁻¹). Interspecific competition with pecan significantly altered root development and morphology of cotton plants. Research in agroforestry should take into account the developmental differences in root systems of the associated crop species so that better models incorporating nutrient and water uptake can be developed.     

Effect of tool angles on the chips generated during milling of wood by straight router-bits

 The effect of tool angles on the shapes of chips generated by parallel-to-grain and end-grain milling was explored for China fir and maple under fixed spindle and feed speeds and cutting depth. The milling path was up-milling by straight router-bits with a diameter of 12 mm. The chip shapes could be distinguished as five types: spiral, splinter, flow, thin, and granules or powder. The flow and thin chips were generated most often (on a weight percentage basis) for all tool angles investigated for parallel-to-grain and end-grain milling of China fir and maple. More granule chips were produced with parallel-to-grain milling than with end-grain milling for both woods. The measured chip thickness (t′) was thicker than the calculated thickness (t _max). Thicker and longer maple chips were produced by end-grain milling than by parallel-to-grain milling. The tool geometries of 40°/15° (sharpness of the angle–rake angle), 50°/15°, and 60°/15° for China fir and 40°/25°, 50°/5°, and 60°/5° for maple produced relatively more flow chips with parallel-to-grain milling. Furthermore, the tool geometries of 40°/5°, 50°/15° and 60°/25° produced more flow chips (weight percentage) by end-grain milling of China fir and maple. Received: May 23, 2001 / Accepted: June 28, 2002 Acknowledgment This study was supported by a grant from the National Council of Science, Taiwan (NSC89-2313-B-415-011).     

西南桦人工林木材纤维形态株内变异研究

为研究西南桦人工林的木材物理力学性能,对其禾材纤维形态进行了测试.结果表明:径向上纤维长度、纤维宽度、纤维长宽比在髓心处较小,沿髓心向外逐渐增大并渐趋稳定,纤维壁腔比在髓心处较大,沿髓心向外逐渐减小并渐趋稳定;轴向上纤维长度、宽度、长宽比在树根处较小,随树木长高逐渐增大并逐步趋于稳定,纤维壁腔比在树根处较大,随树木长高逐渐减小并逐步趋于稳定.西南桦人工林木材纤维较长,纤维长宽比较大,纤维壁腔比较小,纤维形态表明西南桦人工林木材是适合用于制浆造纸工业的极好原料.     

扰动扩散流动分析法测定土壤氮、磷技术研究

随着国家对农业面源氮、磷污染防治力度的加大,土壤氮、磷测定技术迫切需要改善。本研究在对常规的扩散对流（Dispersion convection）和强迫对流（Forced convection）流动分析方法基础上,提出了扰动扩散（Perturbation diffusion）流动分析方法,以实现土壤氮、磷全自动化快速测定与分析。扰动扩散流动分析方法是将样品和试剂定量化后集中在化学反应腔中进行反应,然后程序控制蠕动泵对化学反应腔中反应物进行反复扰动,待化学反应完全稳定后流入光电探测单元完成土壤氮、磷含量测定。采用取自湖北潜江的土壤样品对扰动扩散流动分析方法进行了系统验证,实验结果表明,本研究提出的方法与常规紫外可见分光光度法对氮、磷测定相比,基于硫酸钠和碳酸氢钠联合浸提的土壤铵态氮测量值相关系数为0.915 5,基于氯化钙浸提的土壤铵态氮、硝态氮和水溶性磷测量值相关系数分别为0.998 5、0.990 1和0.991 1。铵态氮、硝态氮和水溶性磷的检出限分别为0.055 4、0.020 3 mg·L^-1和0.008 4 mg·L^-1,相对标准偏差（RSD,n=7）分别为1.8%、4.8%和1.0%。     

单翼迷宫式滴灌带的关键参数与灌水均匀度的响应关系

为探究单翼迷宫式滴灌带坡度、进水压力和铺设长度对灌水均匀度的影响,以3种单翼迷宫式滴灌带为研究对象,以灌水均匀度作为评价指标,采用UL₉(3⁴)均匀正交设计试验,比较了3种不同流量的单翼迷宫滴灌带在进水压力、铺设长度和坡度作用下的灌水均匀度的变化规律。经直观分析、方差分析和多重比较进行综合评价,再由SPSS和PPR对试验数据进行数学建模。结果显示,3种单翼迷宫式滴灌带灌水均匀度的外界因素排序均为压力>坡度>长度,相比于SPSS、PPR所建立的模型具有更高的精度。研究成果不仅为灌水均匀度计算与预测提供了理论依据,还对各学科试验优化设计、高维数据建模分析提供了有效的解决方案。     

甜菜夜蛾幼虫龄数和龄期的测定

甜菜夜蛾[Spodoptera exigua(Hübner)]属鳞翅目(Lepidoptera)夜蛾科(Noctuidae),是芦笋、番茄、棉花、萝卜、玉米等植物上的重要害虫。明确该虫幼虫的龄数和龄期,可为其预测预报和科学防治提供依据。对甜菜夜蛾幼虫各龄期的头壳宽度、体长和体重进行测量,并根据频次分布图、戴氏定律、Crosby生长法则和回归分析推断和验证甜菜夜蛾幼虫的虫龄数。结果显示,甜菜夜蛾1~5龄幼虫的头壳宽度范围分别为0.21~0.30、0.40~0.49、0.65~0.75、1.05~1.15、1.65~1.80 mm,频次分布呈现出5个明显的集中区域;1~5龄幼虫的体长范围分别为1.0~3.1、2.5~6.5、4.0~10.0、5.0~15.0、11.0~27.0 mm,各龄期体长出现重叠,频次分布集中区域不明显;1~5龄幼虫的体重范围分别为0.025~0.567、0.200~6.000、1.100~15.200、6.200~65.600、32.900~275.200 mg。结果表明,试验条件下甜菜夜蛾幼虫共5龄,幼虫头壳宽度可作为分龄指标,而幼虫体长和体重在各龄期出现较大程度的重叠,不宜作为分龄指标。     

丛枝菌根真菌侵染指标与植物促生效应相关性分析

为探讨不同丛枝菌根真菌(Arbuscular mycorrhizal fungi,AMF)生长特性与功能(植物生长和养分吸收)的相关性。采用分室根箱装置,以玉米(Zea mays L.)和紫花苜蓿(Medicago sativa L.)为宿主植物,选取7种AMF:摩西斗管囊霉Funneliformis mosseae、变形球囊霉Glomus versiforme、根内根孢囊霉Rhizophagus intraradices、幼套近明球囊霉Claroideoglomus etunicatum、近明球囊霉C.claroideum、细凹无梗囊霉Acaulospora scrobiculata、黏屑多样孢囊霉Diversispora spurca,以不接种为对照进行温室盆栽试验,测定菌根侵染率、根外菌丝密度、植物地上部生物量、磷/锌吸收量、植物根系AMF gDNA丰度以及玉米根系ZmPht1;6的相对表达量。结果表明:接种F.mosseae、R.intraradices、G.versiforme、C.etunicatum的玉米和紫花苜蓿根系侵染率及根外菌丝密度较高,对植株生长和磷、锌吸收均表现为正效应;C.claroideum、A.scrobiculata、D.spurca根系侵染率和根外菌丝密度较低,C.claroideum对紫花苜蓿生长和磷吸收表现为促进效应,而对玉米表现出抑制效应,后两者对植株生长和磷、锌吸收无显著效应或抑制作用;AMF的生长指标(菌根侵染率和根外菌丝密度)与菌根生长效应以及磷、锌吸收效应之间均具有较高的正相关性,根系AMF总侵染率对玉米菌根生长效应、磷/锌吸收效应变异的解释量分别为79.0%,77.6%和74.1%;菌丝侵染率对紫花苜蓿菌根生长效应、磷/锌吸收效应变异的解释量分别为76.5%,72.6%和74.0%;此外,仅紫花苜蓿根系AMF gDNA丰度与根系总侵染率显著正相关,玉米根系ZmPht1;6基因的相对表达量与菌根磷吸收效应显著正相关。综上,AMF的侵染指标显著影响植物生长和养分吸收效应,AMF gDNA丰度可作为表示AMF生长的指标,但因植物而异,玉米根系ZmPht1;6的相对表达量在一定程度上可反映AMF吸磷能力。     

款冬花初加工方法研究

采用高效液相色谱法测定不同干燥方法以及不同花梗长度下款冬花中款冬酮和绿原酸的含量。结果表明:采用传统阴干法,款冬花中款冬酮与绿原酸的含量均达到最高,不同干燥方法下款冬酮含量由高到低依次为60℃烘干70℃烘干40℃烘干晾晒50℃烘干30℃烘干;总体来看,绿原酸含量随着烘干温度升高而降低,款冬酮、绿原酸的含量随着花梗长度的增加而降低。综上所述,款冬花最佳干燥方法为传统阴干法。若需采用烘干法,应综合考虑温度对款冬酮、绿原酸含量的影响,最佳烘干温度为40℃;建议用款冬酮、绿原酸2个指标综合评价款冬花药材质量,一级款冬花花梗长度≤1 cm,二级款冬花花梗长度≤2 cm,统货花梗长度≤3 cm。