半粒稻米直链淀粉测定方法的研究及应用

本文提出一个简便易行的分析方法,用1粒稻米既可测出其中的直链淀粉含量,还可用以繁种,便于在育种早代选择优良个体、提高效率,加快进程。用本方法测得的直链淀粉含量与用中华人民共和国国标法GB_(7648-87),测得的结果经t检验,差异不显著。利用本法分析了F_1代种子及其亲本的直链淀粉含量,结果表明,在非糯品种与糯稻品种的两     

黄淮夏大豆形态性状的遗传研究

本文以黄淮地区6个夏大豆品种(系)通过双列杂交保留下来的F_3代材料,研究大豆6个形态性状的遗传特性.结果表明,株高、有效分枝数、主茎节数、主茎荚丛数和茎粗5个性状均符合加性—显性模型.而底荚高则存在非等位基因之间的互作效应.株高、有效分枝数、主茎节数和主茎荚丛数为部分显性,茎粗存在超显性现象.主茎节数和主茎荚丛数可能有相似的遗传特点.豫豆8号大豆带有较多的控制株高的显性基因,油84-30大豆带有较多的控制分枝和茎粗的显性基因,而尖顶大白角大豆控制主茎节数和美丛数的显性基因较多.     

小麦随机多交后代中抗条锈(Puccinia striiformis)性的选择

本试验用16个被认为可能具有水平抗性的小麦品种为基础材料,采用乙烯利化学杀雄或太谷核不育为手段进行随机多交,以相对抗病性综合指数(RRCI)表示抗病性强度,研究了小麦条锈病水平抗性的遗传力及人工选择下的遗传进度,结果指出:1)随机多交的后代系统中,出现了一些抗条锈性显著高于优良亲本的系统。2)抗条锈性的遗传力较高:化     

大豆化学诱变育种及其规律的研究

应用化学诱变剂处理大豆种子,对M_1代植株的生育及形态均有强烈的抑制作用.M_1代所产生的形态变异主要是由于化学物质扰乱了植株生理而产生生理损伤所致.在M_2代植株各性状中以分枝数、株高、单株荚数的遗传变异系数较大,说明这些性状选择的潜力是大的,通过选择容易达到预期目标.诱变M_3代绝大多数性状仍在分离.加强选择,能选出早熟、大粒、农艺性状好、丰产的新品系.     

基于遗传算法的机械产品多参数选配方法

对机械产品多参数选配问题进行了描述，并以同时满足多个装配精度，使不适配零件数量最小化为目标，建立了求解该问题的数学模型。针对机械产品多参数选配的特点，提出了一种基于遗传算法的选配方法。根据问题的特殊性，设计了相应的编码方法和遗传算子。最后给出了应用该算法解决机械产品多参数选配问题的一个实例，证明了该算法的可行性与有效性。     

基于混合遗传算法的谐波齿轮传动优化设计

以谐波齿轮传动体积最小为优化设计目标,建立了混合离散变量优化设计数学模型。引入混沌移民算子,对基本遗传算法进行了改进,以维持群体的多样性,提高全局收敛能力。提出了一种设计变量的离散化处理方法,结合染色体编码的修正技术,在遗传算法中染色体按离散化后的设计变量进行离散搜索。开发了混合离散变量优化的改进遗传算法程序,给出了谐波齿轮传动的混合离散变量优化设计实例,所得优化设计参数符合设计规范,不需进一步处理就可直接用于制造。     

基于遗传算法的泵汽蚀试验数据拟合

文章对标准的遗传算法进行改进，采用了浮点数直接编码方式最优保留策略、算术交叉和非一致性变异算法等方法，并对泵汽蚀试验数据拟合问题进行分析，引入了此改进的遗传算法。最后给出了一组汽蚀试验数据，分析采用常规方法拟合和基于遗传算法拟合。结果说明了本文提出方法的可行性。     

Combining deliberative and computer-based methods for multi-objective land-use planning

This paper reports the outcomes of a deliberative workshop comparing land-use plans proposed by land-manager or domain experts with those derived using a computer-based decision support system (DSS). The DSS integrates four main components, a geographic information system, land-use systems simulation models, impact assessments and land-use planning tools. The land-use planning tools draw on the other components to generate and evaluate alternative patterns of land use and management. Since the land-use planning tools are based on multi-objective genetic algorithms (mGAs) it is possible to generate a range of alternative plans that define the structure of the trade-off between the objectives. The workshop tasked the delegates with specifying land-use plans that achieved the best compromise between two objectives known to be non-commensurable and conflicting. The nature of the best compromise was dependent on their individual perspectives. The delegates proposed allocations both as individuals and in researcher-facilitated sub-groups. The mGA allocations were then compared with those derived by delegates and were found to be broadly similar in performance. Differences in the range of allocations considered feasible were explained by the hard and soft constraints on allocations agreed between the delegates and articulated within the workshop process. The hypothesis that part of the difference in performance between the mGA and delegate allocations was due to the delegates blocking together fields with the same land use for convenience of management was proved. The analysis of the group allocations revealed that the decision-making process had failed to improve on the individual allocations. From these results it was concluded that there was a potential role for mGA based land-use planning tools in researching into, and deliberating on, the possible impacts of policy or other factors affecting land-use systems. It was further concluded that the tools should not be used in isolation since there was the need for stake-holder inputs to adequately define the range of feasible and practical land-use plans.     

Inverse Modeling to Quantify Irrigation System Characteristics and Operational Management

Remotely sensed (RS) data is a major source to obtain spatialdata required for hydrological models. The challenge for thefuture is to obtain besides the more direct observable data(landcover, leaf area index, digital elevation model andevapotranspiration), non-visible data such as soilcharacteristics, groundwater depth and irrigation practices.In this study we have explore the option of using inversemodeling to obtain these non-RS-visible data. For a commandarea in Haryana, India, we applied for the 2000–2001 rabiseason a RS-GIS-combined inverse modeling approach to derivenon-RS-visible data required in the regional application ofhydrological models. A Genetic Algorithm loaded stochasticphysically based soil-water-atmosphere-plant model (SWAP) wasdeveloped for the inverse problem and used in the study. Theresults showed good agreement with the inventoried data suchas soil hydraulic properties, sowing dates, groundwaterdepths, irrigation practices and water quality. The deriveddata could be used to predict the state of the system at anytime in the cropping season, which can be used to evaluateoperational management strategies.     

遗传算法在离心泵叶片优化设计中的应用

对遗传算法在流体机械优化设计中的应用现状作了较为全面的总结；提出了将遗传算法应用于离心泵叶片优化设计中，分析了遗传算法在离心泵优化设计中应用的可行性以及存在的问题；对离心泵优化设计的发展提出了一些新建议和尝试。