The method for designing the profile of forest roads supported by genetic algorithm

This study examines a method for designing an optimum profile of a forest road in a short matter of time. In this method, a genetic algorithm (GA) searches for points where the gradient changes and dynamic programing (DP) designs the longitudinal slope. This method can be applied to the ground heights of an actual forest road. The evaluation function of the DP assesses the total expenditure. The inverse of this function is the fitness function. Crossover and mutation are operators of an evolution simulation of a GA. They are each repeated 20 times and 420 profiles are designed and assessed, all within about 10 min. A comparison of the profile designed by the GA with that of an actual forest road shows only one section where the formation level differed substantially. Overall, both profiles seem to show a high degree of correspondence. From this result, we believe that the profile designed by the GA is best, or the one of the best. A conventional method takes about 65 h to calculate all changing points of gradients. However, by using the GA, the calculation time was reduced to about 1/389 that of the coventional method, showing that the method which uses the GA through the profile design is very useful.     

河南省森林碳储量及动态变化研究

利用河南省1949—2003年间8次森林资源清查资料,建立不同优势树种生物量与蓄积量之间的回归方程,对河南省54a来森林的碳储量进行了推算。结果表明:河南省54a间森林的总碳储量虽然存在一定的波动现象,但总体呈上升的趋势。全省森林的总碳储量由1949年的2 863.91万t C增加到2003年的4 673.43万t C,共增加1 809.52万t C,年均增加33.51万t C。阔叶林占全省各时期森林总碳储量的80%以上,栎类和杨树两个树种占主导地位。河南森林幼、中龄林占的比重较大。全省森林平均碳密度为22.86~23.64t C/hm2,远低于全国、世界的平均水平。     

陇南茶树主要病虫害发生动态及防治措施

针对甘肃陇南茶树病虫害发生种类不清的实际,采用普查与定点调查相结合的方法,在摸清了主要病虫害发生规律的基础上,根据无公害茶叶生产要求,探索了无公害防治技术。     

Power spectrum density and experimental modal analysis of wide belt sander applied in domestic wood industry

This paper took the upper-lower wide belt sander B229 with four-feet wide belts, manufactured in China, as the study target. By means of framework dynamic design, we study its vibration characteristics by commencing from the place having horizontal defects and used experimental modal analysis (EMA) and power spectrum density (PSD) to observe the sanding parts and the whole machine, respectively. In the modal test, we mainly adopted the cross spots testing method to get the frequency response function of the fixed spots to every excitation vibration spot, then applied the SISO frequency response function and the frequency response function fitting method to identify and complete parameter recognition, respectively. The typical frequency response function chart of the whole machine and its sanding parts, as well as its second-order mode charts of contacting roller, were obtained. Through PSD analysis, we can get the amplitude-frequency spectrum and drive frequency. Translated from Scientia Silvae Sinicae, 2005, 41(6): 132–137 [译自: 林业科学]     

落叶松人工林间伐技术优化研究*

本文以林分生长模型为基础，将林分的经营指数作为状态变量，将主伐时林分平均直径作为目标，将达到这一目标时林分总收获蓄积量作为指标函数，建立了离散确定性动态规划模型，编制了计算机模拟系统。利用此系统即可对落叶松不同培育目标下的最佳间伐时间、间伐强度和主伐年龄等进行决策。结果表明，优化决策方法在保留株数、间伐次数和总收获蓄积量上都优于一般决策方法，它既可对落叶松林分进行生长预测，也可为制定经营单位的经营     

麻池背油松天然林林分生长结构的研究

依据历年调查资料,对麻池背油松天然林的林分生长结构进行了研究.该林分的植物种类丰富;直径、树高、林龄等林分结构呈正态分布、近似正态分布和多峰状分布;近熟林的林分蓄积生长率为0.82%,材积生长量69年生时连年生长量仍大于平均生长量.由于林分密度过大,油松形状比值偏高,林木自然稀疏强烈,枯损率达32.7%,其中小径木占86.3%,病虫害感染枯死木占29.4%.油松天然更新不良,辽东栎不能成为更新树种,林下有青木杄、落叶松幼树分布.     

杜仲皮内杜仲胶形成积累的规律

为了弄清杜仲皮含胶率的年变化、逐年变化和垂直变化的特点和规律,为杜仲皮内杜仲胶的有效利用提供科学依据,2002年,在河南省嵩县杜仲综合试验示范基地进行了杜仲皮内杜仲胶形成积累的试验.试验方法为选择典型样株法和随机取样法;杜仲皮样品采集后均进行了发汗处理;采用杜仲胶综合提取法测定含胶率.试验结果表明:杜仲树皮含胶率在一年内的变化不明显;树龄为6 a以前的树皮其含胶率随树龄的增长而提高,树龄为6 a以后的树皮其含胶率有所下降并逐步趋于稳定;同一单株杜仲树皮的含胶率和杜仲胶的密度,随其主干高度的增加总体呈上升趋势;由于杜仲皮含胶率在一年中比较稳定,因而在不同的生长季节均可以取皮利用,且以树龄为6 a的杜仲皮最为适宜;由于树皮木栓层不含杜仲胶,随着树龄增加,树皮木栓层逐步形成,树皮含胶率降低,利用率随之降低.     

华山松木蠹象自然种群生命表初报

通过林间定期周年跟踪观察研究,编制出了华山松木蠢象自然种群生命表,并对影响华山松木蠢象自然种群的关键阶段进行了分析,计算出华山松木蠢象自然种群趋势指数,初步对华山松木蠹象种群变化趋势进行了预测.     

穗花杉群落演替研究

采用固定样地的研究方法,对穗花杉Amentotaxus     

南方岩溶区植被自然演替恢复研究综述

我国岩溶区绝大部分分布在南方。植被的自然演替恢复是岩溶区生态重建的主要方式。随着自然演替的进行,土壤环境特征、土壤养分特征及土壤种子库等产生相应的变化。而岩溶植被的顶极群落特征和群落演替特征,包括盖度、结构、物种多样性、生物量、分布格局、演替方向都有其自身的特殊性。