FLUENT软件及其在植保机械方面的应用

FLUENT软件是流体力学中通用性较强的商业软件之一，由于FLUENT软件的应用，节省了大量的人力和物力。对实际应用有重大的指导作用。为此，通过简述FLUENT在植保机械方面的应用实例，提出了FLUENT在植保机械方面的发展前景。     

云厚朴SFE-CO2萃取物中厚朴酚与和厚朴酚的热稳定性考察

温度是影响云厚朴提取物稳定性的主要因素,本研究考察云厚朴提取物的热稳定性。采用高效液相色谱法,测定云厚朴SFE-CO2(二氧化碳超临界流体萃取)工艺萃取物中的和厚朴酚、厚朴酚在不同温度干燥时的含量变化并得出降解规律,干燥时降解为一级反应,在100 ℃降解较快。采用恒温加速实验,得出SFE-CO2萃取液中的和厚朴酚、厚朴酚室温25 ℃贮存期分别为1 125.6 h和975.7 h。在制剂生产中,云厚朴SFE-CO2萃取物不宜长时间贮存,以减少有效成分损失;由于热不稳定性,高温干燥会导致制剂质量不稳定,降低药效,应在较低温度下干燥。     

金针菇多糖的提取及含量测定

探讨了用温度70℃热水提取、sevag法除蛋白、乙醇分级沉淀提取金针菇多糖,以及用硫酸-蒽酮法测定其含量的方法。该方法测得多糖的总收率为金针菇湿质量的0.11%,测定多糖的线性范围为1～16μg/mL,对金针菇多糖含量测得的RSD小于2.24%,回收率为97.6%～102.8%。     

Physical simulation of fluid field and structure optimization in two-strand tundish

The influence of the structure and location of dam and weir on fluid flow state in a two-strand tundish is studied, and a set of optimal structure, combining with the average residence time calculated from RTD curve, is obtained. The result indicates that the fluid flow state can be changed and the path of the fluid flow can be prolonged as well as the average residence time is improved after using dam and weir. But there are some dead zones after fluid passed through the dam and weir. Combination scheme of No. one dam and weir is better than the others. Its average residence time is 299 s and the volume fraction of dead zone is 31.0%. After the optimization of flowing control parameters in tundish, the best case is that the distance between dam and weir is 290 mm and the distance between weir and the long nozzle is 383 mm. The longest average residence time is 351 s and the minimum volume fraction of dead zone is 19.0% under the above situation. Compared with that of no dam and weir, the average residence time increases by 65 s and the dead zone volume fraction decreases by 15.0%. Based on Newton formula, the calculated results show that the inclusions with diameter larger than 17.5 μm can float up within 351 s under this optimization situation.     

菲牛蛭抗凝血活性物质提取方法研究

为对菲牛蛭抗凝血活性物质的提取进行优化,通过采取不同方法对菲牛蛭活体(6种)、干体(6种)及唾液腺分泌物(3种)进行提取得出最适提取方法。结果表明对于菲牛蛭活体和干体均是采取80%预冷丙酮提取得到的抗凝血物质含量高,最高分别达至(61.20±1.13)AT-U/g和(89.19±1.13)AT-U/g;对于菲牛蛭唾液腺分泌物则是采取10%的三氯乙酸提取得到的抗凝血物质含量高,最高达(24.41±0.98)AT-U/g。研究结果得出了适合菲牛蛭活体、干体和唾液腺分泌物中提取抗凝血活性物质的最适方法,有利于推动水蛭素的大规模生产和广泛的临床应用。     

Numerical Analysis and Optimization of a Small Vehicle Heat Exchanger

This paper analyzes the fluid flow and heat transfer of the heat exchanger, and obtainsd the distribution of fluid field, heat field and pressure field in heat exchanger. According the analysis result, some modify measure is adopted, such as decreasing the number of tube bundle, the size of baffle plate and increasing the diameter of exchange heat tube. In the new heat exchanger, the resistance decreased 32.3%, is 103.2 Pa and the temperature of the exit is 130 K. The new heat exchanger satisfies the requirement of exchanging heat. The study indicates that adopting the numerical simulation method could get temperature, pressure and fluid - velocity of anywhere of the heat exchanger, and understand effecfing of structure parameter on fluid flied and heat flied of the heat exchanger. Therefore, it provides a new method for optimization design of heat exchanger.     

绵茵陈中绿原酸的提取工艺研究

【研究目的】研究并优化乙醇提取绵茵陈中绿原酸的最佳操作参数;【方法】以绵茵陈为原料,通过单因素试验、正交试验和方差分析确定最佳提取工艺;【结果】结果表明:乙醇提取绵茵陈中绿原酸的效果较好;确定的最佳工艺参数乙醇浓度为60%、料液比1:25、提取温度60℃、提取时间1.5h;【结论】采用60%乙醇可以很好提取绵茵陈中的绿原酸。     

山楂多糖提取的研究

采用正交实验法考察不同因素和水平对山楂多糖提取率的影响,分别得出水浴浸提和超声提取的最佳工艺条件。