Soil Nitrogen Distribution and Plant Nitrogen Utilization in Direct-Seeded Rice in Response to Deep Placement of Basal Fertilizer-Nitrogen

Deep placement of controlled-release fertilizer increases nitrogen(N) use efficiency in rice planting but is expensive. Few studies on direct-seeded rice have examined the effects of deep placement of conventional fertilizer. With prilled urea serving as N fertilizer, a two-year field experiment with two N rates(120 and 195 kg/hm~2) and four basal N application treatments(B50, all fertilizer was broadcast with 50% as basal N; D50, D70 and D100 corresponded to 50%, 70% and 100% of N deeply placed as basal N, respectively) were conducted in direct-seeded rice in 2013 and 2014. Soil N distribution and plant N uptake were analyzed. The results showed that deep placement of basal N significantly increased total N concentrations in soil. Significantly greater soil N concentrations were observed in D100 compared with B50 at 0, 6 and 12 cm(lateral distance) from the fertilizer application point both at mid-tillering and heading stages. D100 presented the highest values of dry matter and N accumulation from seeding to mid-tillering stages, but it presented the lowest values from heading to maturity stages and the lowest grain yield for no sufficient N supply at the reproductive stage. The grain yield of D50 was the highest, however, no significant difference was observed in grain yield, N agronomic efficiency or N recovery efficiency between D70 and D50, or between D70 and B50, while D70 was more labor saving than D50 for only one topdressing was applied in D70 compared with twice in other treatments. The above results indicated that 70% of fertilizer-N deeply placed as a basal fertilizer and 30% of fertilizer-N topdressed as a panicle fertilizer constituted an ideal approach for direct-seeded rice. This recommendation was further verified through on-farm demonstration experiments in 2015, in which D70 produced in similar grain yields as B50 did.     

施氮量对双季稻产量及氮磷钾吸收利用的影响

研究不同施氮量对双季稻产量、氮磷钾积累量及氮磷钾利用率的影响,同时探讨双季稻吸收利用氮、磷、钾素三者间的相互关系。通过田间试验研究施氮量不同、磷钾投入量相同条件下的双季稻产量、双季稻氮、磷、钾积累量、双季稻氮、磷、钾素利用效率及磷钾吸收利用与氮吸收利用的关系。结果表明:双季稻产量在一定范围内(早稻0～105 kg/hm~2,晚稻0～146 kg/hm~2)随施氮量的增加而提高,之后产量随施氮量增加而降低。本试验施氮条件下,早稻产量最高的处理为75%N(105 kg/hm~2),比CK(不施化肥)增产58.1%;晚稻产量最高的处理为100%N(146 kg/hm~2)处理,比CK增产67.6%。施氮水平对双季稻植株氮、磷、钾养分积累量有显著影响,早、晚稻稻谷氮、磷、钾积累量均以100%N处理最高。不同施氮水平对氮、磷、钾养分利用效率也有显著影响。适宜的施氮量可以增加双季稻产量,促进水稻对氮、磷、钾养分的吸收,同时提高双季稻的氮、磷、钾素利用效率。综合考虑双季稻产量效应及氮磷钾养分的有效吸收利用,双季稻施氮量为105～146 kg/hm~2较为适宜。     

局部涂抹纳米碳与尿素溶液对桃树梢叶生长及氮素吸收、分配的影响

以7年生的鲁星油桃为试材,采用15 N同位素示踪技术进行田间涂抹试验,研究不同浓度纳米碳与相同浓度尿素溶液(0μg/mL+0.2%,50μg/mL+0.2%,100μg/mL+0.2%,200μg/mL+0.2%,分别以CK、NC50、NC100、NC200表示)涂抹部分叶片对桃树局部梢叶生长、氮素吸收及分配的影响,以期为桃树栽培过程中施用碳纳米提供新的思路和有益的参考。结果表明:与对照相比,施用纳米碳后桃树涂抹叶片单叶面积明显增加,叶绿素含量显著提高,NC200处理下叶片的净光合速率、蒸腾速率和气孔导度比对照提高了15.8%,30.0%,12.4%;纳米碳的施用提高了桃树新梢的干物质积累量,NC100、NC200处理比对照增加了10.5%和12.9%,提高了新梢各部位的全氮含量;高浓度的纳米碳(NC200处理)提高了新生器官对氮素的吸收征调能力(Ndff值);随纳米碳浓度的增大氮素的利用效率显著提高,NC50、NC100、NC200处理的氮素利用率比对照提高了13.6%,29.5%,40.0%;此外,新生嫩叶部分以NC200处理的氮素分配率最高,达19.55%,NC50、NC100、NC200处理氮素分配率比对照提高了4.5%,16.2%,17.1%,差异显著。以上结果表明,纳米碳能够促进新梢叶片对氮素的吸收利用,有效提高叶绿素含量、光合作用效率及新梢局部氮素利用率,影响氮素在梢叶各部位间的分配,促进氮素向生长中心(新生嫩叶)的转移。     

管道内检测器皮碗过盈量对其力学行为的影响

为了研究管道内检测器皮碗过盈量对皮碗力学行为的影响,以直径为800 mm的管道的内检测器皮碗为研究对象,分析聚氨酯材料的力学特性,建立用于分析管道内检测器皮碗过盈量的二维轴对称有限元模型。通过计算分析,得到了皮碗过盈量为0~10%时,唇缘接触应力、唇缘接触长度、夹持端角度、唇缘角度、皮碗折点内外侧应力的变化趋势,并拟合得到了过盈量与上述参数之间的关系。结果表明:随着皮碗过盈量增加,皮碗唇缘应力趋势由指数下降趋势逐渐转化为线性下降趋势;皮碗唇缘接触长度、夹持端角度的增长速率随皮碗过盈量增大而快速增加;折点内外侧应力增长速率均随皮碗过盈量增大而减小;皮碗唇缘角度随着皮碗过盈量增大而线性减小。     

不同增氧水平对夏玉米生长及氮素利用的影响

为探究有利于夏玉米生长和氮素利用的适宜灌溉水溶解氧浓度,本试验以夏玉米为供试作物,采用地下滴灌供水方式,以地下水灌溉为对照,设置10(OA10)、20(OA20)和40(OA40) mg·L^-1灌溉水溶解氧浓度3个增氧水平,研究不同增氧水平对盆栽夏玉米生长、产量和氮素利用的影响。结果表明,增氧地下滴灌显著提高了土壤溶解氧浓度,与对照相比,OA40、OA20和OA10处理土壤溶解氧浓度平均提高14.83%、9.71%和8.00%,表现为作物生长增强,作物产量和氮素利用效率均显著提高(P<0.05)。与对照相比,OA10处理的株高、叶鲜质量和叶干质量分别增加7.39%、16.30%和12.02%;OA40处理叶干质量和茎鲜质量分别增加15.82%和12.43%;OA10、OA20和OA40根系鲜质量分别增加60.00%、17.66%和52.98%,根系体积分别增加34.03%、14.56%和51.32%;OA10和OA20处理根系活力分别增加272.77%和64.44%;OA10和OA40处理产量分别增加24.46%和21.83%,水分利用效率分别提高19.10%和21.61%,百粒重分别增加17.53%和15.14%。OA10和OA40处理籽粒氮素吸收量较对照分别增加63.90%和35.27%,OA10处理籽粒氮素分配比例和氮素吸收效率分别增加21.57%和33.33%。上述差异均具有统计学意义(P<0.05)。综上,增氧地下滴灌可显著提高作物根区溶解氧浓度,促进作物生长,提高产量及氮素吸收利用,以OA10处理效果最为显著。本研究结果为增氧灌溉技术在实际生产中的合理利用提供了理论依据。     

尤溪县野生茜草科植物资源开发利用探讨

经调查,发现福建省尤溪县野生茜草科植物共有22属,44种(包括变种)。对该区野生茜草科植物的种类、优势属、数量与利用价值进行分析,同时提出保护与开发利用建议。     

基于纳米压痕技术的木材胶合界面力学行为

【目的】研究木材胶合界面的静态和动态力学行为,探讨树脂渗透对木材管胞壁层力学性能的影响,为木质复合材料制造工艺优化和增强改性提供理论依据。【方法】采用纳米压痕静态和动态力学测试技术(Nano-DMA),对针叶材火炬松与酚醛树脂(PF)、脲醛树脂(UF)胶黏剂所形成胶合界面区域各相材料的静态弹性模量、硬度、蠕变性能以及储能模量和损耗模量等力学行为进行分析。【结果】静态力学行为方面,在界面区域,PF和UF渗透进入管胞壁层后,木材管胞壁的弹性模量( E r)和硬度( H )提高;经PF渗透后,木材管胞壁的 E r和 H 分别增加7%和26%;Burgers蠕变力学模型可有效描述胶合界面区域管胞壁的纳米压痕蠕变特性,经树脂渗透后,木材管胞壁的瞬时弹性模量增加,黏弹性模量和黏性系数减小;在保载初期,PF界面区域木材管胞壁的蠕变柔量约下降60%,UF界面区域木材管胞壁的蠕变柔量约下降58%。动态力学行为方面,随着加载频率增加,界面材料的储能模量( E ′ r)逐渐增大,而损耗模量( E ″ r)和损耗因子(tan δ)呈减小趋势;当加载频率为10 Hz时,PF和UF树脂渗透使得管胞壁层的储能模量分别增加16%和29%。【结论】胶合界面区域胶黏剂进入管胞壁层,对木材管胞的静态力学性能具有增强作用,同时胶黏剂可提高管胞壁的短期抗蠕变能力;木材管胞壁具有较高的储能模量和损耗模量,而树脂的储能模量和损耗模量较低,经树脂渗透后,木材管胞壁的储能模量增加,但损耗模量和损耗因子呈下降趋势,可能对界面传递和分散应力产生不利影响。     

日照地区湿地生物多样性及保护利用研究

主要介绍了日照市湿地资源概况,分析了湿地植物、动物资源等的生物多样性特征,探讨了湿地发展面临的问题,并提出了相应的保护对策,以期为日照湿地生物多样性的保护和可持续利用提供基础参考。     

普通和控释尿素配合深施提高冬小麦花期旗叶光合性能与氮素利用效率

【目的】探究在不同尿素类型与施用深度下,冬小麦开花后旗叶光合性能和光系统Ⅱ(PSⅡ)性能及氮素利用的差异,以期为协同提高氮素利用效率与籽粒产量,简化小麦生产过程提供理论依据。【方法】于2015—2016年与2016—2017年冬小麦生长季进行试验,以‘济麦22’为供试材料,采用二因素裂区试验设计,尿素类型处理(T)为主区,施用深度处理(D)为裂区。尿素类型包括普通尿素处理(T1,基追比为4∶6)与普通和控释尿素配施处理(T2,普通尿素、硫包膜尿素、树脂包膜尿素以4∶3∶3混合一次性基施),施用深度为地下5 cm (D1)与10 cm (D2)。测定了开花后旗叶气体交换参数和叶绿素荧光诱导动力学曲线(OJIP),及不同生育时期地上植株氮素积累量。【结果】2年试验结果表明,相较于普通尿素处理,普通和控释尿素配施处理可显著提高冬小麦有效穗数和千粒重,对穗粒数影响不显著;施用深度对2016—2017年千粒重影响显著,对2年单位面积有效穗数和穗粒数影响不显著;普通和控释尿素配合深施处理(T2D2)产量显著高于其它处理。尿素类型和施用深度对气体交换参数影响显著,普通和控释尿素配合深施处理可显著提高花后旗叶净光合速率(Pn)和气孔导度(Gs),显著降低胞间CO2浓度(Ci),相对延长了高光合持续期。普通和控释尿素配合处理较普通尿素处理显著提高了旗叶光系统Ⅱ(PSⅡ)反应中心对光能的吸收(φPo)、转化(φEo)以及电子在电子传递链中转移的效率(ψo);显著改善了电子传递链供体侧(Wk)和受体侧(Vj)性能,有效提高了产量形成期光合性能的稳定性。同一尿素类型下,深施处理对光系统Ⅱ(PSⅡ)性能的改善大于浅施处理。相较于普通尿素处理,普通和控释尿素配施处理可显著提高冬小麦生育中后期植株氮素积累量;相较于浅施处理,深施处理对冬小麦不同生育期氮素积累均有不同程度的提高。除对2016—2017年氮素生理利用率(NPE)影响不显著外,普通和控释尿素配合深施处理显著提高了2年冬小麦氮肥农学利用效率(NAE)、氮肥偏肥生产力(PEPN)、成熟期氮肥表观回收率(NRE)和2015—2016年氮素利用效率。【结论】普通尿素与控释尿素配合深施可显著提高冬小麦花期旗叶光合性能,促进氮素利用,增加产量,有利于冬小麦产量与氮肥利用之间的协同提高,省时增效效果明显,是本试验中最佳组合模式。     

Effects of Side Deep Fertilization on Yield Formation and Nitrogen Utilization of Mechanized Transplanting Rice

【Objective】Mechanized transplanting of rice with synchronous side deep application of fertilizer is a new and advanced technology that is still developing rapidly. In-depth studies on the effects of mechanized side deep placement of different types of nitrogen (N) fertilizer on the grain yield and N utilization efficiency of mechanized transplanted rice will be helpful for devising strategies to improve the mechanization of planting and fertilization, and to provide a theoretical basis for reducing costs and increasing fertilization efficiency in rice production. 【Method】Field experiments were conducted in 2017 and 2018 with a randomized complete block design, with five N fertilizer application treatments: N0-plots without N fertilizer; CUB-manual surface broadcast of urea (CU); CUM-mechanized side deep placement of CU; CRUB-manual surface broadcast of controlled release urea (CRU); and CRUM-mechanized side deep placement of CRU. The characteristics of matter production, as well as N uptake and distribution, N use efficiency, yield, and yield components of rice were determined. 【Result】Each N fertilizer application treatment had similar effects on yield formation and N use efficiency in the two years. Compared with the CU treatment, the CRU treatment significantly improved dry matter accumulation, N uptake, N utilization efficiency, and grain yield. The dry matter accumulation and N uptake at maturity, N recovery efficiency (NRE), N agronomy efficiency (NAE), and grain yield were higher in the CRU treatment than in the CU treatment by 3.22%, 17.50%, 46.00%, 17.79%, and 3.72%, respectively, in 2017; and by 8.77%, 13.27%, 32.07%, 12.74%, and 3.32%, respectively, in 2018. Compared with surface broadcasting, mechanized deep placement of N fertilizer, regardless of the type of N fertilizer, significantly enhanced N use efficiency, and increased NRE and NAE by 17.91%-43.14% and 19.61%-37.39% respectively, in 2017; and by 53.80%-54.10% and 21.11%-35.11%, respectively, in 2018. Compared with surface broadcasting, mechanized deep placement of N fertilizer (CU or CRU) increased the grain yields in 2017 and 2018 by 4.46%-6.95% and 5.55%-8.11%, respectively, because of increased numbers of effective panicles and spikelets. The N uptake in stems-sheaths and leaves and the apparent amount of N translocated in stems-sheaths and leaves (TNT) were significantly higher in the CRUM treatment than in any other N application treatments from the heading stage to the maturity stage. Compared with the other N fertilizer treatments, the CRUM treatment also increased N uptake, SPAD values, and total aboveground biomass at the panicle initiation stage and full heading stage. 【Conclusion】Mechanized side deep placement of controlled release urea is an efficient fertilization method to increase the grain yield and N use efficiency of mechanized transplanted rice.