玉米茎结构参量与产量关联及最优化分析

高效高产农业是可持续生产的重点,为研究玉米茎结构参量综合利用效率及最优利用率产量提高幅度,本研究使用2015年北京市小汤山镇获取的玉米数据,将玉米茎结构参量作为输入指标,生物量、产量和经济系数为产出指标,运用数据包络分析探讨利用效率及最优利用效率。结果表明:‘京华8号’玉米茎结构参量利用效率都保持在0.7以上,仅67%达到最优利用效率水平;小喇叭口期和抽雄期茎结构参量利用效率中上部茎粗最差,下部茎粗最优但仍有提高潜力;玉米茎结构参量综合利用效率最优效率时资源充分利用产量有不同程度的提高,其中抽雄期提高产量最大为32%。玉米茎结构参量利用效率尚未达到最优,提高其利用效率尤其抽雄期可显著提高产量。     

间接地下滴灌导水装置规格参数模型研究

根据灌水过程中质量守恒原理建立了导水装置规格(直径,高度)参数求解模型,该模型中综合考虑了滴头流量、灌水定额、土壤水力特性参数以及活动水位等因素对导水装置规格的影响。通过室内恒定水头积水入渗试验的设计和研究,定量化了土壤水力特性参数对导水装置规格参数模型的作用,并研究了导水装置内水位深度的动态变化规律。结果表明,当忽略导水装置内积水深度的动态变化对土壤水力特性参数的影响时,与一维垂直入渗规律相似,导水装置内积水入渗累计入渗量与时间的关系可用菲利普公式进行拟合,但在土壤类型一定时,间接地下滴灌的参数渗吸系数S和稳定入渗速率if还与土壤上方的积水面积有关。当滴头流量大于土壤入渗速率时,导水装置内开始产生积水,且积水深度处于不断上升的过程。该模型的建立为间接地下滴灌导水装置规格的选取提供了理论指导。     

Possibilities for energy wood procurement in north-west Russia: Assessment of energy wood resources in the Leningrad region

Abstract

Methodology to assess the potential for energy wood procurement in Russia is described in this article and applied to the Leningrad region. Wood from thinnings, logging residues, non-industrial roundwood and residues from sawmilling are considered as sources for energy production. Energy wood available in the region, based on the 2004 actual cut, is approximately 4 million m³. Nearly 86% of this is non-industrial roundwood and felling residues, and 14% is by-products from sawmilling. Almost two-thirds of the non-industrial roundwood and felling residues are in cutting areas and one-third is in central processing yards. Deciduous tree species (birch and aspen) dominate in energy wood, representing about 65% of the total amount of felling residues and non-industrial wood. It is possible to intensify utilization of forest resources and thereby also to increase the use of wood in energy production. The total amount could be 54% higher if the allowable cut was fully utilized and 124% higher if thinnings were also utilized completely. There are, however, significant intraregional differences, as the current rate of utilization of forest resources varies in the region.     

强夯后沉降量计算值的分析

以江铜瓮福化工有限公司40万吨/年硫酸厂房工程为例,在强夯法处理地基沉降时,对强夯后计算的最终沉降量与实际平均沉降存在的差异提出问题。通过反算,分析造成这一结果的原因,为今后在强夯法处理地基的计算提供参考。     

桉树木材旋切单板质量以及制造胶合板工艺的研究

对福建省主要桉树木材材性及其旋切单板厚度偏差、背面裂隙率进行检测分析,探讨木材旋切单板的适应性和制造胶合板的工艺并采用正交法优选最佳工艺参数。结果表明:尾叶桉单板背面裂隙率和单板厚度变动系数比尾巨桉小,尾叶桉用于旋切1.5 mm厚度单板质量较佳。尾叶桉木材制造胶合板较佳工艺参数:热压温度为130℃、单位压力为1.4 MPa、热压时间为1.35 min·mm-1、涂胶量为320 g·m-2。工艺条件对板材性能均有影响,桉树木材龄级对板材性能影响显著,随着桉树龄级的增大,板材性能有较大幅度提高,特别是静曲强度、弹性模量影响最为明显。     

静电处理林木种子适宜参数选择的初探

本文采用技术经济学中加乘混合综合评价方法,对刺槐、紫穗槐种子的15种静电处理进行了综合评价,并应用数理统计学中方差分析和t-检验方法,对两树种的适宜处理参数进行了筛选,结果表明,静电处理刺槐的适宜处理参数为:-100×5,-100×10,-100×20,-100×40。-150×5,-150×10,-150×20,-150×40,-200×5(kV/m×min);静电处理紫穗槐的适宜处理参数为:-100×5,-100×10(kV/m·min)。在静电处理参数两个组分中,场强起主导作用,时间次之。因此,在实际应用中时间选用可以短些。     

森林主伐量的动态分析计算

本文在考虑现有森林各龄级的蓄积及其连年生长率的两个前提下,对能保证永续利用的最大收获量求算方法作了初步的探讨。虽然解决问题的方法归结为非线性目标规划问题,但在编制电算程序时,由于用的是从高龄级到低龄级的试算循环比较法,因而比非线性目标规划程序简短得多,电算时所占的内存空间和耗费的机时也少得多。     

林区公路中线测量计算的微机程序

本文介绍编制的BASIC程序,能承担线路中线测量各种曲线的计算工作,能进行多次快速拟定曲线半径,从而可以选择最合理的半径,能显示线路中线测量各曲线计算需要的数据和曲线里程桩号,并且可以重复显示有关数据,避免了重新输入变量的麻烦。使用该软件进行林区公路中线测量计算,其操作简便,运算速度快,计算精确,工效高。     

姬松茸水溶性粗多糖对镉中毒小鼠血液指标的影响

为观察姬松茸水溶性粗多糖对镉中毒小鼠血液系统的影响，将60只SPF级雄性健康小白鼠随机分为对照组、模型组、试验组1、试验组2和试验组3共5组，模型组与3个试验组采用同一水平镉染毒，但同时对3个试验组给予不同剂量的姬松茸水溶性粗多糖溶液进行保护，试验日程为5周，试验结束时对各组小鼠采血，检测各项血液指标。结果显示，模型组小鼠的血液指标红细胞数（RBC）、血红蛋白浓度（HGB）、血细胞比容（HCT）、平均红细胞体积（MCV）、平均红细胞血红蛋白含量（MCH）、平均红细胞血色素浓度（MCHC）显著低于对照组的相应指标；与模型组相比，给予高剂量姬松茸水溶性粗多糖的试验组3的血液指标RBC、HGB、HCT、MCV、MCH、MCHC均显著提高，而白细胞数（WBC）、小型白细胞数（Lym）和中型白细胞数（Mid）则显著下降。证实，重金属镉能够损伤小鼠的血液系统，但高剂量姬松茸水溶性粗多糖对镉的损伤具有防止作用。     

Comparison of homogeneity and heterogeneity of residual variance using random regression test-day models for first lactation Japanese Holstein cows

Using a large‐scale data set that included first lactation test day records from 1975 to 2000 for Japanese Holsteins, genetic parameters for milk yield were estimated by using random regression (RR) test‐day models (TDM) with heterogeneous and homogeneous residual variances. It is necessary for the RR‐TDM to include a function that explains the shape of the lactation curve. The RR‐TDM with the LW curve, which combined Wilmink's curve and a Legendre polynomial, was used for fitting the model for milk yield. In recent years, increases in residual variance have been noted for Japanese dairy cattle. Thus, three kinds of heterogeneous residual variance over the calving year were considered: H1, H2 and HG. Linear and quadratic exponential functions for the calving year were used in H1 and H2, respectively. Residual variance of HG was divided into five groups according to calving year. Homogeneous residual variance was HO. All heterogeneous residual variances increased with calving year in an almost linear fashion. Residual variance increased over the study period. However, there is no need to consider heterogeneous residual variances in genetic evaluations, because the heterogeneity of residual variance over the years did not affect the ranking of top sires and cows.