大类招生下机械电子工程专业学生实践和创新能力的研究与应用

文章从学生实践能力和创新能力两个核心能力培养方面进行了理论研究与实践探索。首先简要介绍了专业概况与研究背景,然后对几个核心概念进行了定义与解释,最后结合齐齐哈尔大学的一些做法与经验提出了大类招生下机械电子工程专业学生实践和创新能力培养的建议。     

Optimising cutting method and timing for the control of Abutilon theophrasti seed production

Abutilon theophrasti (velvetleaf) is a widespread and problematic annual weed. Greenhouse and field experiments were conducted to investigate the effects of different cutting methods on the viability of A. theophrasti seeds. Three cutting methods were assessed: (1) Entire plant cut and dried (EPD)—plants were cut at soil level and dried with capsules attached on the greenhouse bench or soil surface for 4 weeks; (2) capsules detached and dried (CD)—capsules were removed from plants and dried for 4 weeks; and (3) capsules detached and tested while fresh (CF)—a control treatment. Before drying, the developmental stage (stage one, dark green; stage two, light green; stage three, yellowish-green; or stage four, black with the slightly open capsule) and age (days after flowering, DAF) of each capsule was recorded. Seed viability was measured immediately in the CF treatment and after the 4-week drying period in the EPD and CD treatments. No seeds in the EPD and CD treatments were viable when harvested at the first developmental stage (1–8 DAF) in either experiment, but 100% of seeds in the CF treatment in the field were viable when harvested at 8 DAF. In both greenhouse and field experiments, seeds attained full viability at earlier harvest ages in CF than in EPD or CD treatments, suggesting that seeds might become viable relatively early in development but lose viability if allowed to dry. These findings could be applied to optimise late-season mechanical control of A. theophrasti.     

Evaluation of finger weeder safety and efficacy for intra-row weed removal in irrigated field crops

Increased demand for pesticide-free food and the development of herbicide-resistant weed populations have created a need for non-chemical weed-control tools. A candidate mechanical tool for controlling weeds in the seeding line (intra-row zone) is the finger weeder. This study thus aimed to evaluate the safety and weed-control efficacy of the finger weeder in various irrigated field crops. Eight field trials were conducted in processing tomato, sweet corn, sunflower, cotton, and beetroot over 2 years. The finger weeder treatments were applied as the sole weed-control method (single or double treatments) and in combination with herbicides. A mini meta-analysis was used to evaluate the overall effect of the finger weeder treatments on crop stand and yield and on weed control efficacy. Weed density in the control not treated with herbicides nor a finger weeder ranged between 2 and 62 weeds m⁻². The finger weeder treatments resulted in a significant reduction in weed density, which ranged between 40% and 90%. The weed density following the double finger weeder treatment was not significantly different from that for the conventional herbicide-based treatment (p = 0.32) and could therefore be considered as an effective environmentally friendly alternative. Furthermore, a single FW treatment integrated with herbicide application gave better weed control than the conventional herbicide treatment (p = 0.04). This treatment was safe for the crops with no significant stand (p = 0.19) or yield (p = 0.29) reductions compared to commercial treatment. The results of this study demonstrate the promise of the finger weeder as an effective tool within integrated weed management systems for conventional agro-systems. The tool offers a rational weed-control solution for sustainable systems under irrigation.     

退化高寒草甸斑块根—土复合体特征研究

高寒草甸斑块的根-土复合体对局部水土流失过程具有调控作用,为研究其特征及抗侵蚀效应,本研究选取三江源区达日县境内典型中度退化草甸的植被斑块为研究对象,调查草甸斑块中心与边缘植物群落特征,测定斑块边缘0～10 cm土层和斑块中心0～20 cm土层的容重、含水率、毛管孔隙度等土壤物理性质,并开展单根拉伸和根-土复合体直剪试验。结果表明：受优势种矮嵩草的分布影响,地上生物量主要分布在斑块中心,根系主要分布在0～10 cm土层;斑块中心区域土壤抗剪强度、内摩擦角和粘聚力均随土层深度的增加而减小;斑块边缘区域土壤粘聚力,抗剪强度明显高于斑块中心区域,草甸斑块植物根系是土壤抗剪强度的主要影响因素。草甸斑块根-土复合体能明显增加退化草甸土壤的抗侵蚀能力,研究结果可为深入研究高寒草甸根系固土功能及水土流失调控提供科学依据。     

Comparison between mainstream (Capnostat 5) and a low-flow sidestream capnometer (Capnostream) in mechanically ventilated,sevoflurane-anesthetized rabbits using a Bain coaxial delivery system

ObjectiveTo evaluate agreement between end-tidal carbon dioxide (Pe′CO₂) and PaCO₂ with sidestream and mainstream capnometers in mechanically ventilated anesthetized rabbits, with two ventilatory strategies.Study designProspective experimental study.AnimalsA total of 10 New Zealand White rabbits weighing 3.6 ± 0.3 kg (mean ± standard deviation).MethodsRabbits anesthetized with sevoflurane were intubated with an uncuffed endotracheal tube (3.0 mm internal diameter) and adequate seal. For Pe′CO₂, the sidestream capnometer sampling adapter or the mainstream capnometer was placed between the endotracheal tube and Bain breathing system (1.5 L minute^–1 oxygen). PaCO₂ was obtained from arterial blood collected every 5 minutes. A time-cycled ventilator delivered an inspiratory time of 1 second and 12 or 20 breaths minute^–1. Peak inspiratory pressure was initially set to achieve Pe′CO₂ normocapnia of 35–45 mmHg (4.6–6.0 kPa). A total of five paired Pe′CO₂ and PaCO₂ measurements were obtained with each ventilation mode for each capnometer. Anesthetic episodes were separated by 7 days. Agreement was assessed using Bland-Altman analysis and linear mixed models; p < 0.05.ResultsThere were 90 and 83 pairs for the mainstream and sidestream capnometers, respectively. The mainstream capnometer underestimated PaCO₂ by 12.6 ± 2.9 mmHg (proportional bias 0.44 ± 0.06 mmHg per 1 mmHg PaCO₂ increase). With the sidestream capnometer, ventilation mode had a significant effect on Pe′CO₂. At 12 breaths minute^–1, Pe′CO₂ underestimated PaCO₂ by 23.9 ± 8.2 mmHg (proportional bias: 0.81 ± 0.18 mmHg per 1 mmHg PaCO₂ increase). At 20 breaths minute^–1, Pe′CO₂ underestimated PaCO₂ by 38.8 ± 5.0 mmHg (proportional bias 1.13 ± 0.10 mmHg per 1 mmHg PaCO₂ increase).Conclusions and clinical relevanceBoth capnometers underestimated PaCO₂. The sidestream capnometer underestimated PaCO₂ more than the mainstream capnometer, and was affected by ventilation mode.     

Phase Transformation Diffusion Bonding of Titanium Alloy to Stainless Steel

Jointing of titanium alloy and stainless steel is very often in the fields like aviation, chemical plants etc. The combination of materials has the advantages of both titanium alloy and stainless steel and will reduce the consumption of titanium resource. The phase transformation diffusion bonding of TA17 titanium alloy to 0CriSNigTi stainless steel are carried out on Gleeble - 1500D. The effcet of maximum thermal cycle temperature, the tensile strength, the fracture surface and microstruture of the joints are investigated. The results show that TiFe and TiFe2 intermetallics and some solid solutions are formed along the interface, when maximum thermal cycle temperature increase, the area proportion of intermetallics in the fracture surface increase, which are detrimental to the mechanical properties of the transition joints.     

Human Simulated Intelligence Motion Control for Three-link Acrobot on Horizontal Bar

The design of multi-controller and multi-mode control law is presented for the three-link Acrobot on horizontal bar by employing Human simulated intelligent control method based on sensory-motor Schema.Imitated the characteristics of gymnast's swing-up and handstand movement,the control process of robot is divided by six sequence phase.Then the sensory cell and motor cell and the group of sensory-motor schema is designed based on the analysis of quality-quantity combination.The simulation results show that the controller ensures the gesture and the energy to the desired goal,farther more the motion control of giant swing backword is realized in the simulation.     

Strength and Microstructure of Sulphoaluminate Cement Containing Ultra- Fine CaCO3

The existence of ettringite in sulphoaluminate cement hardened paste is mainly in the form of pole-like crystal,which causes unfavorable effect on the cement.In this paper the strength and microstructure of the sulphoaluminate cement containing ultra-fine CaCO_3 weze discussed.Experimet results show that the strength of sulphoaluminate cement was obviously improved by adding 3% of ultra-fine CaCO_3.After curing for 28d,the compressive strength of cement paste and mortar is 100.6MPa and 94.1MPa respectively,and the bending strength of the mortar reached 12.5MPa.SEM study on hardened paste of sulphoaluminate cement containing ultra-fine CaCO_3 showed that its structure was dense and homogeneous,there was hardly any massive crystall detected.     

Mechanical Signalling in Plant: Perception and Transduction Pathway

The metabolism and development of plants are controlled through interplay between genetic and environmental cues.For optimal growth plants require the ability to coordinate complex developmental processes and at the same time sense and respond to environmental stimuli.The responses can be divided into three main events: stimulus perception,generation and transmission of a signal,and subsequent changes in downstream biochemical processes.Because of space limitation this review does not provide an exhaustive account of plant signal transduction.Rather,the authors intention is to cover new and important results in this field,including the mechanochemical transform mediated by integrin and integrin-like protein,the change of membrane fluidity respond to stimulus,and the wide accepted transduction pathway of calcium signaling system.The research emphasis and tendency are prospected.