污水泵的研究现状与进展

研究固液两相流体在离心泵内的运动规律、完善其设计理论和设计方法一直是设计人员十分重视的课题。针对污水泵的研究情况,分别从污水泵理论研究、内特性研究、外特性研究、水力设计等几个方面对污水泵的研究现状进行了较为详细的阐述,指出加强泵内外特性研究、探求流动机理、开发适合水泵设计的专业化软件用于泵产品的计算机集成制造(CIMS),将是泵行业发展的重要方向。     

隔膜泵容积效率影响因素的灰色关联分析

分析了ＧＭ－１２０型单缸强制式隔膜泵容积效率的主要影响因素，用灰色关联分析的方法给出了这些影响因素的优势序列，为进一步改善隔膜泵的性能提供了依据。     

Analysis of Radial Forces on the Seal Block in a Compound Gear Pump with 3 Idle Gears

By analyzing the pressure distribution between gears and sealing blocks in compound gear pump with three idlers,the resultant hydraulic forces acting on seal blocks are obtained.The conclusion is the unbalanced resultant hydraulic forces are relatively small in magnitude.In the pump,the inner sealing edges are long and so it s Sealing effect is good,but the outer sealing effect is relatively poor because of its short sealing edges.The little unbalanced force pushes the sealing block to te pumping chamber,therefore it is advantageous to meliorating the pump's sealing effect,thereby to improving it's volumetric efficiency as well.     

One-cycle Technique Based Adjustable Ac Source

By using one-cycle control theory, a novel voltage source inverter is proposed. The conventional one-cycle control technique needs that the integrator is reset instantaneously. But it is very difficult to realize with hardware due to the finite time constant of the reset circuitry. Therefore, based on the one-cycle technique, the paper gives a new control scheme to resolve the problem with dual switched integrator, and the performance of the integrators is close to ideal. The paper also uses the dc offset to implement the voltage measurement. Furthermore, the amplitude and frequency of the output voltage are effectively adjustable. The one-cycle control technique not only provides fast dynamic response, but also can admirably suppress the perturbation yielded by dc source and abate the undesired harmonic contents. Simulation studies were performed to prove the proposed scheme. The results show that the one-cycle control based voltage source inverter makes good use of dc source that is 92.8% and THD is only O. 255 9%.     

Simulation of High Pressure Startu Poil Pum Pof Turbine

Dynamic mathematical model, which is based on the character of the 200 MW tubine lbricating oil system, is established by means of modularization. On the basis of dynamic mathematical models, simulation model of the startu Pprocess of hign pressure startu Poil pum Pis created with the Visual Fortran language. The validity of this model has been verified by the simulation experiments and analysis. The simulation helps to forecast the dynamic characteristic to high pressure startu Poil pum Pand have some directive significance to design method of lubricating oil system.     

A PRACTICAL PWM CONTROL METHOD OF CURRENT SOURCE GTR INVERTER

According to the principle that the orbit of stator current vector in complerplane should be as close to a circle as possible, the PWM control pattern is derived and determined. The control method is realized by using a micro-computer.     

地源热泵技术在中国温室设施中的应用探讨

当前在中国温室设施中应用和推广地源热泵技术尚存在诸多不利因素,大大限制了该项技术在设施农业领域中的发展。为探寻合理的解决途径,对地源热泵空调系统的关键技术和其在中国的发展概况进行了相关的阐述和分析,并以中国农业大学上庄实验站已经建成使用的地下水式温室地源热泵空调系统为实例,介绍该系统的组成、工作流程、性能参数和使用情况,探讨温室地源热泵空调系统在推广和使用中可能出现的投资较高,长时间运行性能不稳定等问题,分析其原因并提出相应的对策建议。     

基于多块网格技术的离心泵叶轮CFD分析

网格生成是三维紊流数值分析的重要组成部分，其网格质量对数值求解的稳定性及精度至关重要。结构化网格具有节省内存和便于节点编号等优点被广泛使用。对于几何形状复杂的离心泵叶轮通道，用单块结构化网格难以很好地进行描述。采用多块网格技术，根据各块和流场的特点，探讨了离心泵叶轮通道结构化网格划分中的一些处理方法，同时对离心泵叶轮三维紊流场进行了雷诺平均N-S方程的数值模拟，检验了所提的方法。