园林有害植物——五爪金龙

五爪金龙(Ipomoea cairica)是旋花科多年生草质藤本植物,原产北美.它生长迅速,攀爬能力强,现已成为我国华南地区仅次于薇甘菊(Mikania micrantha )的草质藤本害草,对广州、深圳及粤东地区的公园绿地、风景林、人工林、果园、茶园、苗圃等造成了极大的危害.文章详细介绍了五爪金龙的形态特征、生物学特性和生态学特征、危害状况以及存在的问题,以期引起人们对该植物足够的警惕,并为有关部门对该植物进行科学有效地防范和治理提供依据.     

东莞峡口大桥加固设计

该文通过东莞市峡口大桥的加固工程,针对该桥检测评估结果提出了有针对性的加固设计方案及措施.经有关部门检测,加固效果良好.     

三倍体毛白杨的木材构造与材性的研究

对三倍体毛白杨的木材构造特征、纤维形态、基本密度进行了观察记载和测定，发现其生长轮宽度达2.5～3.0cm，纤维平均长度大于同年轮的其它杨木，基本密度小于毛白杨成熟材，木纤维的含量较高，同时纤维的壁腔比较小，所以三倍体毛白杨是一种较好的造纸和纤维工业原料。     

图像分割技术在木材表面缺陷识别中的应用

阐述了图像分割技术在图像处理及分析中重要意义,以及主要的图像分割技术。以木材表面缺陷为主要研究对象,利用微分算子边缘检测、最优迭代阈值分割及形态学方法针对具有代表性缺陷死节和虫眼进行分割处理。     

数学形态学在木材表面缺陷图像分割后处理中的应用

介绍了数学形态学的基本思想和运算。针对木材表面缺陷图像分割效果不完善的问题,提出基于数学形态学的图像后处理方法,包括应用数学形态学的填充操作、形态滤波以及形态梯度边缘检测等。经实验验证,应用数学形态学进行图像后处理,增强了木材缺陷图像分割结果的可视性和准确性。     

油棕丝纤维板热磨机螺旋进料器的设计分析

介绍了油棕丝的特点、油棕丝螺旋进料器主要参数的计算及关键元件的设计分析。     

防霉中密度纤维板的研制

在湿度较大的地区和潮湿的场所,中密度纤维板(下称中纤板)因长期受潮而产生霉变,使其性能受损,更为严重的是污染了居住环境。因此,研究如何防止中纤板霉变,使其具有防霉性能应作为一项重要的课题。笔者通过对防霉剂选择、优化热压工艺参数、防霉效果测试等方面进行了试验研究,确定了适当的防霉剂及其添加量,得出了压制防霉中纤板的优化热压工艺。     

Effects of five additive materials on mechanical and dimensional properties of wood cement-bonded boards

There is a growing desire to improve the properties and use of nonwood plant materials as supplements to wood materials for wood cement-bonded boards (WCBs). This study was conducted to determine the comparative properties of WCBs containing various amounts of discontinuous inorganic fiber materials, such as alkali-resistant glass fiber, normal glass fiber, mineral wool, and nonwood plant materials such as retted flax straw and wheat straw particles. Tested cement-bonded boards were made at wood/additive compositions of 100/0, 90/10, 80/20, 70/30, 60/40, and 50/50 (weight percentages). Seventy-eight laboratory-scale WCBs were produced. Various board properties, such as the modulus of rupture (MOR), internal bonding strength (IB), water absorption (WA), thickness swelling (TS), and linear expansion (LE), were studied. The test results showed that three types of discontinuous inorganic fiber used as reinforcing materials in composites significantly enhanced and modified the performance of WCBs. The mechanical properties and dimensional stability of cement-bonded board were significantly improved with increasing amounts of the additives. MOR and IB were increased; and WA, TS, and LE of boards were reduced by combination with the inorganic fiber materials. The results also indicated that combination with retted flax straw particles only slightly increased the MOR of boards, and wheat straw particles led to marked decreases in all the mechanical properties and the dimensional stability of WCBs.Part of this report was presented at the 50th Annual Meeting of the Japan Wood Research Society, Kyoto, April 2000     

碱蓬和盐地碱蓬花粉形态研究及其在分类上的贡献

借助光学显微镜和扫描电镜研究了碱蓬属2种植物碱蓬和盐地碱蓬的花粉形态，并对不同生境条件下盐地碱蓬4变式的花粉形态进行了对比研究，研究结果表明：花粉粒外部形态成球形；大小在15.4-24.0μm之间；具有散萌发孔，萌发孔数量在46－55之间，萌发孔直径为3．1－5．4μm；花粉粒表面光滑，其上散布许多颗粒状小突起，萌发孔上亦有数目不等的小突起。以上数值在不同种间有较明显的差异，在盐地碱医宵同生态变式间亦有差异，但差异较小。这些细微的特性差异可为碱蓬属植物分类提供参考依据，是研究该属植物分类及生态的新资料。