基于Lefkovitch矩阵模型的山酢浆草种群动态分析

依据林下多年生草本植物山酢浆草Oxalis griffithii的形态学特征,将其生活史划分为4个阶段,并根据3种生境下山酢浆草种群的野外调查资料建立了不同种群的Lefkovitch结构矩阵模型,在此基础上预测了山酢浆草种群的动态及其阶段结构的变化;同时,运用敏感度、贡献率指标分析了影响种群动态的关键生活史阶段。结果表明：不同生境下山酢浆草种群的动态发展趋势不尽相同,常绿阔叶林下的种群（MD）呈稳定发展状态,其他2种生境下种群表现出衰退的发展趋势;种群的动态变化过程受个体的生长、残存、萎缩和繁殖等的综合影响;不同生活史阶段对种群动态的影响差异显著,种群动态过程及其发展趋势主要受种群内较大阶段个体的影响。图2表5参19     

Response of Cotton to Irrigation Methods and Nitrogen Fertilization: Yield Components,Water‐Use Efficiency,Nitrogen Uptake,and Recovery

Efficient crop use of nitrogen (N) fertilizer is critical from economic and environmental viewpoints, especially under irrigated conditions. Cotton yield parameters, fiber quality, water‐ and N‐use efficiency responses to N, and irrigation methods in northern Syria were evaluated. Field trials were conducted for two growing seasons on a Chromoxerertic Rhodoxeralf. Treatments consisted of drip fertigation, furrow irrigation, and five different rates of N fertilizer (50, 100, 150, 200, and 250 kg N /ha). Cotton was irrigated when soil moisture in the specified active root depth was 80% of the field capacity as indicated by the neutron probe.

Seed cotton yield was higher than the national average (3,928 kg/ha) by at least 12% as compared to all treatments. Lint properties were not negatively affected by the irrigation method or N rates. Water savings under drip fertigation ranged between 25 and 50% of irrigation water relative to furrow irrigation. Crop water‐use efficiencies of the drip‐fertigated treatments were in most cases 100% higher than those of the corresponding furrow‐irrigated treatments. The highest water demand was during the fruit‐setting growth stage. It was also concluded that under drip fertigation, 100–150 N kg/ha was adequate and comparable with the highest N rates tested under furrow irrigation regarding lint yield, N uptake, and recovery. Based on cotton seed yield and weight of stems, the overall amount of N removed from the field for the drip‐fertigated treatments ranged between 101 and 118kg and 116 and 188 N/ha for 2001 and 2002, respectively. The N removal ranged between 94 and 113 and 111 and 144 kg N/ha for the furrow‐irrigated treatments for 2001 and 2002, respectively.     

Role of Testa, Cotyledons and Embryonic Axis in Seed Dormancy of Groundnut (Arachis hypogaea L.)

Experiments were carried out during winter–summer (January–June) season to understand the role of seed testa, cotyledons and embryonic axis in imparting dormancy of some groundnut cultivars belonging to different habit groups. Crop was harvested at four maturity stages; 90, 100, 110 and 121 days after emergence (DAE). After drying the pods in shade for 2 days, the germination of seeds with (GST) and without (GSW) testa in rolled germination towels and seeds, and embryonic axes (GEM) in culture media from individual plants of a cultivar was studied. Seed testa played an important role in imparting dormancy followed by the cotyledons, and embryonic axis. However, the nature of dormancy of embryonic axis appeared to be different from that of the testa and cotyledons. Results suggested that the dormancy in groundnut is regulated mainly by testa (a maternal tissue) in the Spanish type, but by cotyledons, and embryonic axis (both zygotic tissue) as well as testa in Virginia types. Thus the genetic control of seed dormancy in groundnut appears to be quantitative in nature.     

Transpositional feeding rhythm of loach <Emphasis Type="Italic">Misgurnus anguillicaudatus</Emphasis> from larvae to juveniles and its ontogenesis under artificial rearing conditions

The diel feeding rhythm and ontogenesis during early life stage of loach Misgurnus anguillicaudatus were investigated under experimental conditions (light: L 06:00–18:00, D 18:00–06:00 h). Morphological and behavioral developments of loach from newly hatched to 40 days after hatching were observed. Larvae were able to prey on daphnia 3–4 days after hatching at 23 ± 0.5°C. As the larvae grew, they showed an increasing feeding capacity and a distinct feeding rhythm. Feeding intensity and incidence for day-4 larvae were highest at 10:00 and 16:00 h. The highest levels of feeding intensity for day-12 larvae occurred at 08:00, 12:00, and 18:00 h as did feeding incidence. By day 20, when the larvae metamorphosed, the highest levels of feeding intensity occurred at 06:00, 18:00, and 24:00 h and were concurrent with the highest feeding incidence. After metamorphosis, feeding capacity had again increased considerably and, in contrast to the earlier stages before day 20, feeding intensity for day-30 juveniles peaked at 05:00 and 20:00 h, about 1–2 h after the maximum feeding incidence. The feeding rhythm of loach juveniles at day 40 was almost the same as the day-30 juveniles. The estimated maximum daily feeding rates were 43.1%, 33.4%, 19.0%, 12.8%, and 5.8% of body weight on days 4, 12, 20, 30, and 40, respectively. Thus, loach was found to have different feeding rhythms in the pre- and post-metamorphosis stages, with the highest feeding activity in daytime during the larval planktonic stage before metamorphosis, and intensely nocturnal feeding behavior during the juvenile benthic stage after metamorphosis.     

Number of Pollen Grains in Rice Cultivars with Different Cool-Weather Resistance at the Young Microspore Stage

Abstract

The difference in the number of pollen grains may be the primary factor determining the resistance to cool weather at the young microspore stage in rice (Oryza sativa L.) cultivars. To confirm this hypothesis, we compared the number of pollen grains among the cultivars or lines with various cool-weather resistance. The cultivars or lines used in the experiments were mainly released or grown in the Tohoku district (the northern part of the mainland of Japan). The number of pollen grains showed high correlation with the degree of cool-weather resistance, but considerably varied with the cultivar or line, even in the group having the same cool-weather resistance. Each group with different cool-weather resistance was divided into two subgroups, implying the existence of another genetic factor determining the resistance. The number of pollen grains in the plants cooled at the young microspore stage showed higher correlation with the degree of the cool-weather resistance than that in the control plants without exposure to low temperature. The correlation between the pollen number and spikelet sterility was also analyzed using the data of Satake and Shibata (1992, Jpn. J. Crop Sci. 61 :454–462), who primarily used the cultivars in Hokkaido (the northernmost island of Japan). The results were basically the same as those obtained in the present experiments. These results confirmed the hypothesis that the variation in the number of pollen grains is a primary factor of the resistance to cool weather at the booting stage in the cultivars in the northern part of Japan. The results also suggested the existence of another genetic factor determining the resistance.     

水稻机械割晒拾禾研究分析

建三江地区由于以往收获方式的单一,各种机械配置的不合理及农户对机械收获的认识不全面,收获条件差异等问题的存在,严重影响了水稻机械收获的进度。为了确保粮食保质保量的收获,通过对水稻割晒拾禾可行性、优越性、实施方案及可能存在的问题和注意事项的分析研究,在当地全面推广了水稻机械割晒和机械化直收相结合的收割方式,为实现水稻增产增收提供有利保证。     

施肥量对水稻准两优527产量和营养动态的影响

贵州省黔南苗族布依族自治州属于中国西部丘原山地，平均海拔1100m，岩溶地貌发育典型，土壤贫瘠且宜耕作性较差，耕作粗放，作物的产量一直不高。农民为了提高作物的产量，大量施用无机肥料，肥料利用效率逐步降低，而且肥料的大量施用已经引起了严重的环境问题，因此合理运筹肥料是提高肥料利用率、减少污染的重要措施。     

陕西不同地区沙棘叶的营养成分分析

本文对陕西的宜君、黄龙、靖边、吴旗、永寿5地沙棘叶进行了营养分析，发现陕西不同地域的沙棘叶含有较高的粗蛋白、粗脂肪、丰富的氨基酸和维生素及微量元素，其营养价值优于或等于苜蓿草粉及白三叶干草等常规饲料，证明沙棘叶是应该大力推广应用的优良饲料和饲料添加剂。     

水稻拔节期和抽穗期低温对稻米品质影响

【目的】为了探讨低温冷害对水稻品质的影响,以便为气候变化背景下辽宁地区水稻的高效栽培和品质认证提供理论依据。【方法】以水稻90-35为供试品种,分别于拔节期和抽穗期通过TRP-1000D型人工智能气候箱进行不同低温处理(比外界低5℃和低3℃,均持续5 d),以正常栽培管理作对照,5个处理,分别记为CK、A1、A2、B1、B2,分析拔节期和抽穗期不同等级低温胁迫处理对水稻的营养品质、研磨品质和外观品质的影响。【结果】低温胁迫下90-35水稻的蛋白质含量、直链淀粉含量较CK显著增加,处理A1、A2、B1、B2的蛋白质含量分别比CK增加3.45%、1.15%、6.90%、8.05%,除处理B1外直链淀粉含量分别比CK增加1.75%、0.44%、0.44%;脂肪酸含量和精米率较CK显著减少,处理A1、A2、B1、B2的脂肪酸含量分别比CK减少17.75%、7.5%、25%、11%,精米率分别比CK减少2.1%、6.95%、0.22%、7.5%。拔节期低温胁迫下糙米率和垩白粒率显著减少,处理A1、A2的糙米率分别比CK减少0.73%、1.09%,垩白粒率分别比CK减少33.3%、22.2%;抽雄期低温胁迫下糙米率和垩白粒率显著增加,处理B1、B2的的糙米率分别比CK增加0.6%、3.02%,垩白粒率分别比CK增加255.6%、133.3%,即低温胁迫使其营养品质和研磨品质中的精米率受到负面影响,而拔节期适当低温胁迫处理对其研磨品质中的糙米率和外观品质有益。【结论】水稻90-35在不同生育时期经受不同低温胁迫处理后,水稻的营养品质、研磨品质和外观品质均受到不同程度的影响。     

同轴异面方法及其应用

用同轴异面方法剖析了函数的复合过程,通过内在变量的等值关系,建立了变量间的直角三棱锥规则,解决了参数方程、等积变换、函数与其导数间的关系等问题。