Alternaria Brown Spot of Minneola in Greece; Evaluation of Citrus Species Susceptibility

During the last three years, a new disease was observed in northwestern Greece on Minneola trees, hybrid of mandarin and grapefruit. On May small brown necrotic leaf spots surrounded by yellow halo areas of various sizes appeared and covered a major portion of the leaves with extension of necrosis into the veins. On young fruits small, slightly depressed black spots were the first symptoms, which later became 2–7 mm in diameter. Brown spots were observed on the leaves and fruits in several orchards in the same area, causing leaves and fruits to drop. In some orchards over 50% of the fruits were affected. From the fruit and leaf spots the typical small-spore species Alternaria alternata was isolated. Pathogenicity tests were performed by artificially inoculating fruits of Minneola, common mandarin and Clementine. The symptoms of the disease were reproduced only on fruits of Minneola hybrids by the specific strain of the fungus Alternaria alternata pv. citri. Different citrus susceptibility tests indicated that mandarins Minneola, Nova and Page were very susceptible to tested isolates while Clementine SRA and Poros Clementine were not. All lemons and lime Seedless were not susceptible. Grapefruit New Hall was not susceptible, while the Star Ruby was. Orange Lane Late, Navel Late, Oval Poros, Olinda, Navel Athos were not susceptible and only Moro showed reaction being slightly susceptible only to one isolate.     

代谢调节剂对嫩枝扦插繁殖成活率的影响及其机理

  研究了红栌、樱桃砧木和石榴嫩枝扦插过程中, 喷施MHS代谢调节剂对其插条成活率、生根率和保绿时间的影响, 及其叶片中可溶性糖、可溶性蛋白质、叶绿素含量和SOD活性的变化。结果表明,MHS对扦插难、易生根植物生长均有明显促进作用。对红栌插条而言, 经生根剂浸根并喷施MHS后插条的成活率和生根率均最高, 与清水对照相比分别提高了895173%和735172% , 保绿时间延长了28185 d。插条的可溶性糖、可溶性蛋白质和叶绿素含量随处理天数的增加而呈增高趋势, 且均高于浸根处理的对照组。SOD活性在处理初期活力有所下降, 后期明显增强。由此可见, MHS是通过对插条生理生化代谢的调控来提高其成活率的。     

影响牧草再生性的因素分析

对影响牧草再生性的诸因素进行了分析,阐明了牧草再生性对刈割和放牧利用方式的响应,以及刈割和放牧后牧草体内贮藏的碳水化合物和氮素在再生中的变化规律及作用,为草地的放牧利用和刈割提供了理论和技术依据。     

几种生长调节剂对四翅滨藜全光喷雾扦插效果的影响

四翅滨藜全光照喷雾嫩枝扦插试验结果表明:采用NAA、ABT 2号生根粉、IBA等3种外源植物生长调节剂处理插条2 h,对插条具有良好的促根作用,其中100 mg/L NAA为最好,生根率可达到93.6%;100 mg/LABT2号生根粉和100 mg/L IBA次之,生根率分别可以达到92.6%,92.3%.     

胚轴切断法诱导棉花抗棉铃虫及其生化机制研究

诱导抗虫棉株对棉铃虫营养代谢功能的影响表明,胚轴切断法结合假单胞杆菌（Ｄ－２２５１）诱导处理的棉株可使棉铃虫相对生长率（ＲＧＲ）、相对取食量（ＲＣＲ）和近似消化率（ＡＤ）明显降低,分别降低２２．９５％、２６．１２％和２７．２３％,仅用胚轴切断法处理的棉株可使ＧＲＧ、ＲＣＲ和ＡＤ分别降低１７．２５％、２１．４４％和４．０９％。对诱导处理棉株体内植物多元酚和抗虫萜烯类的测定结果表明,经过胚轴切断法后,     

滨柃实生苗生长规律与扦插繁殖技术研究

为丰富福建沿海造林树种，在惠安赤湖林场开展滨柃（Eurya emarginata）种子育苗和扦插繁殖试验，结果表明，滨柃形成幼苗大约需要45 d时间，8-9月高生长较快，10月之后开始明显下降，到12月基本停止。选择长10～20 cm的插穗，用质量分数为100×10-6的吲哚丁酸溶液浸泡3 h ，能较大幅度提高生根率。     

秸秆饲料青切揉碎机的设计

根据我国畜牧业发展和秸秆饲料利用现状,研究设计了一种大型、高效秸秆饲料加工机械.该机采用直抛滚筒式切碎装置,增设了对作物秸秆和散干牧草的揉搓作用的击碎和揉碎部件,物料加工质量大大提高.喂入装置采用先进的摆臂浮动辊式喂入机构,性能可靠;同时,增加了牵引机构,可实现流动作业.动力可选配18.4kW柴油机或18.5kW电动机.     

可切削性对工程材料的影响

在机械制造业中,尽管金属成形技术有了发展和进步,但大量加工仍要依靠金属切削工艺来完成,而这种状况还要延续到可预见的未来。本文主要探讨了工程材料可切削性的概念、评定方法及其改进措施。     

低温氮气油雾对陶瓷刀具加工镍基K424合金的影响

在于切削、低温氮气和低温氮气油雾3种冷却润滑条件下,通过Sialon陶瓷刀具和SiC晶须增韧Al2O3陶瓷刀具车削K424镍基高温合金的实验,研究了低温氮气及油雾对刀具磨损和表面粗糙度的影响,开发了一个新的冷却系统以获得低温氮气.试验结果表明,切深线沟槽磨损严重限制陶瓷刀具使用寿命,与干切削相比,使用低温氮气和低温氮气油雾增加了切深线沟槽磨损速率,但降低了已加工表面的质量.     

绥芬河经济贸易发展有限公司森林采伐技术初探

根据黑龙江省林区天然林资源保护工程政策及国内外木材市场的需求和发展趋势，结合当地的森林资源情况，对采伐工艺相关技术进行了探讨。