华山松针叶中矿质元素含量的地理变异

以１２年生的种源林为取材对象，在１９９１年４月３０日、７月３０日、１０月３０日及１９９２年１月３０日同时采当年和１年生针叶，测定Ｎ、Ｐ、Ｋ、Ｃａ和Ｍｇ浓度。结果表明，除Ｋ外，其它矿质元素浓度种源间存在极显著差异。地理变异呈纬向渐变型。极端温度与元素地理差异有密切关系，并构成主导自然选择压。元素浓度的季节动态与针叶生长节律循环相伴。南、北华山松已分化成两个营养能力显著不同的地理种群，但动态模式基本相似。     

城市园林绿化质量可拓综合评判方法研究

为客观、准确地对城市园林绿化质量进行评判,依据国际花园城市标准、国家生态园林城市标准、国家园林城市标准、城市绿化规划建设指标规定和部分省级园林城市标准,筛选了建城区绿化覆盖率、建城区绿地率、建城区人均公共绿地面积三大指标为园林绿化质量的评判特征因子。在此基础上,引入可拓学理论,建立了城市园林绿化质量评判物元模型,给出了基于关联函数的可拓评判方法。并结合某城市园林绿化现状,实际评判了其质量综合水平状况。     

高温干燥处理对桉树木材干缩率的影响

桉树是我国南方地区人工林主要造林树种之一,对缓解我国木材供需矛盾发挥着巨大作用。然而,桉树自身所具有的易开裂、变形等缺陷长期以来极大限度的限制了其高效利用。高温干燥处理是提高木材尺寸稳定性的有效方法之一。以尾叶桉、尾巨桉、巨桉等三种桉树为研究对象,在温度180 ~ 220℃、时间1 ~ 5h等不同处理条件下对其干燥,结果表明,与对照材相比,处理后三种桉树木材的抗干缩率均有了不同程度的提高,最大提高率分别为68.24%、70.43%和78.25%。     

林木种子裹衣质量指标的研究

在试验的基础上，提出了林木种子裹衣的质量指标，分析其影响因素，为实施林木种子裹衣技术奠定基础。     

Frost hardiness, bud phenology and growth of containerized Picea mariana seedlings grown at three nitrogen levels and three temperature regimes

We studied the influence of temperature and near- and sub- optimal mineral nutrition of black spruce seedlings (Picea mariana [Mill.] B.S.P.) during their second growing period on bud set, bud development, growth, mineral content and cold tolerance. Bud break and growth after bud break were also studied. Seedlings were grown for 106 d in growth chambers under three temperature regimes in combination with three concentrations of a fertilizer. They were then cold hardened for 56 d and dehardened for 66 d.Under these near- and sub-optimal N levels, bud formation occurred during the growing season. Bud formation was accelerated with decreasing fertilization, but was not affected by temperature treatments. Needles from seedlings with 0.64% N (dry mass basis) before hardening did not harden. Those with 0.87% N showed a lesser degree of hardiness than those with 1.28% N. Stem diameter increased at the beginning of the hardening period. During this acclimation period, shoot dry mass decreased with time at a constant rate and at the same rate over time for all treatments whereas root dry mass was more variable. Total number of needle primordia was low and no difference was observed among growing conditions. Bud break was similar in all treatments. Following bud break, shoot height and stem diameter increases were small but their magnitude varied with the nutritional regimes applied during the previous growing period. During hardening, nitrogen concentration of shoot tissues first increased and then decreased; phosphorus concentration first increased and then remained stable; potassium concentration remained stable. Concentration of these three elements generally decreased in the roots during this hardening.     

南方红豆杉扦插繁殖技术研究

2003~2004年应用2年生南方红豆杉幼苗进行扦插试验研究,结果表明:不同时间扦插的插穗生根时间最多相差2个月,2月中旬至3月中旬为最适宜扦插季节,扦插后3~5个月的生根率高于其它月份。用河沙与红泥作基质扦插,在不同季节扦插中以河沙作基质的生根效果比红泥的好。用生根剂处理有利于插穗提早生根及增加生根数量,以冬季及早春应用的效果较为明显,应用生根剂的插穗在扦插3~5个月后的生根率和生根数量与对照比有显著差异。不同类型插穗的扦插生根率在不同月份扦插的结果不同,但其差异不显著。     

乌海市平沟煤矸石山小地形土壤养分分析

文章以乌海市平沟煤矸石山上平台和边坡两种不同小地形上的土壤为研究对象,通过野外调查取样和室内分析化验,研究煤矸石山两种小地形对土壤养分的恢复情况。结果表明,土壤有机质、全N、碱解N含量在两种不同小地形上表现为边坡>平台,土壤P素、K素含量表现为平台>边坡,总体而言,边坡上土壤养分恢复效果比平台好。平台和边坡上土壤养分含量在不同土层深度中均表现为:0~20 cm层>20~40 cm层。通过参考土壤养分分级与丰缺度标准,目前土壤养分丰缺度主要呈现出缺或极缺状态。     

第二代杉木林养分动态研究

根据连续定位观测所取得的数据,对4个小集水区第二代10年生杉木人工林生态系统中的养分循环进行了研究.结果表明.集水区由降水输入的N、P、K、Ca、Mg等营养元素总计为59.285kg/hm2a,径流输出为38.938kg/hm2a,净积累量为20.347kg/hm2a.与该林分7年生时相比,净积累量提高了7.2%,说明集水区第二代杉木林生态恢复处于进展的变化过程.     

Sensitivity study of the finite element model for wood-framed shear walls

A sensitivity study was performed with a nonlinear elastic finite element model for monotonie analyses of wood-framed shear walls. The objective was to provide information about simplifying a model of wood-framed shear walls with no significant loss in accuracy. The simplifications concern features such as slips in joints between frame members, slips in hold-down connections, and bearing between adjacent sheathing panels. The results from analyses of a shear wall with an opening of window shape show that the effect of constraint by the bearing between sheathing panels and slips in frame joints on the overall stiffness of the wall is limited. Thus, there are great possibilities for reducing the calculation time by not taking these phenomena into account, avoiding an excessive number of degrees of freedom and iterations. The influence of the simplifications on the distribution of vertical reaction forces along the wall is more significant. Furthermore, if each simplification is introduced separately, the effect on the overall stiffness is greater. The difference, however, is less than 10%. The failing pattern of the nail connections is also clearly influenced by the simplifications when they are introduced separately. The results from the analyses show that slips in frame joints can be sufficiently represented by those in connection with the opening.     

用有限元法分析木材中的温度分布

在木材应用中,了解温度在木材中的分布情况,掌握木材在受热时的温度场,才能有效地控制解冻,才能对干燥和防腐问题进行深入的研究,才能合理使用建筑围护材料。近年来,随着计算机应用和计算技术的发展,用数值方法求解木材中的热传导问题将成为有效、实用的方法。在许多种数值方法中,有限差分法和有限元法是目前较为成熟和用得普遍的方法。其中的有限元法是对古典近似计算的归纳和总结,它吸取了有限差