苎麻悬浮细胞原生质体培养再生植株

苎麻品种浏阳大叶绿的子叶在含有２，４－Ｄ０．５ｍｇ／Ｌ、ＫＴ０．５ｍｇ／Ｌ的ＭＳＢ固体培养基上，形成愈伤组织。愈伤组织经３￣４次继代培养后作液体振荡培养，产生悬浮细胞系。从悬浮系分离的原生质体，只有以海藻酸钠包埋方式培养在ＫＭ８Ｐ培养基中，５０天左右才能形成肉眼可见的小愈伤组织。该愈伤组织在附加２，４－Ｄ０．２ｍｇ／Ｌ、６－ＢＡ０．１ｍｇ／Ｌ的ＭＳＢ生长培养基上增殖，然后转入附加６－ＢＡ２．０ｍｇ     

水井酸处理效果预测研究

水井酸处理效果预测一直缺乏成熟的方法。提出了根据水位恢复曲线形态和含水层裂隙特征来预测井的首次酸处理效果，经与石油界所用方法有明显不同。石油界普遍认为，只有不位恢复曲线为快速上翘型的低产碳酸盐岩井才适合酸处理（即基质酸化），但作者近年来发现，多数水位恢复曲线为直线型的低产碳酸盐岩井，即井中含水层裂隙平均宽度＜5mm的井，酸处理效果也很好，被调查3眼这类井的单位涌水量增加值平均为423％；水位恢复曲线为缓慢上翘型的井中，部分含水层裂隙被松散物充填的井，采用特殊的酸处理方法处理后，井的单位涌水量可增加100％。另外，采用适当的方法，使用足够数量的酸进行首次酸处理后，水井再进行酸处理一般效果都很差。     

3MG-30型果园弥雾机的研制与试验

研制了一种与小四轮拖拉机配套的、适用于标准化果园植保作业的机载果园型弥雾机，对该机各项性能指标进行了试验与分析。试验结果表明，与其他类型喷头相比，按一定排列组合的空心雾锥喷头在与风机配合使用进行药液的2次雾化时具有更好的喷雾量分布和雾滴分布均匀性；小于35m/s的风机出口风速所产生的梯度气流使枝叶扭转与退让，并使雾滴的穿透性和树内沉积量增加，提高了作业质量和机组生产率。     

基于状态机的植物生长模型可视化研究

在分析植物生长形态生理变化的基础上,揭示植物生长时空状态的变化规律,提出基于状态机的植物生长模型,并引入随机矢量真实预测植物的生长。根据该模型构建植物生长的可视化算法,合理组织有关植物生长的数据,并开发一个原型系统验证了该模型的有效性。     

耕作土壤表面不平度分析

利用激光式不平度测试仪测定犁耕耕地地面、圆盘耙耙地地面和驱动耙耙地地面的不平度，测定地面不平度沿着3个方向进行，即平行、倾斜和垂直于耕作方向。对每一种地面不平度的RMS高度、自相关长度和自相关函数进行了分析，结果表明：对于短的地块，可用单一尺度来表征地表不平度的特征，地表不平度特征属于指数相关函数，RMS高度和自相关长度具有明显的相关性；对于长的地块，平整的农业地表不平度具有分形性或多尺度性，其自相关函数是一种分形过程。     

Effects of planting density on the productivity and water use of tea (Camellia sinensis L.) clones: I. Measurement of water use in young tea using sap flow meters with a stem heat balance method

Sap flow meters based on the stem heat balance method were used to measure the mass flow rates or water use in young potted tea (Camellia sinensis L.) plants of clones AHP S15/10 and BBK35. The meters were constructed on site and installed onto the stem or branch sections of field growing plants in an experiment originally designed to study the effects of plant population density and drought on the productivity and water use of young tea clones. The objective of the study was to use the SHB method as a first attempt to use sap flow meters for determining the water use of young tea growing in the field under well watered conditions in Tanzania. The results are reported and recommendation made for further work on using the technique.     

Past, present and future criteria to breed crops for water-limited environments in West Africa

Asia's Green Revolution of the 1960s and 1970s has largely bypassed West Africa, and “modern” (high-yielding, input responsive) germplasm for staple crops has found comparatively little adoption, except for systems that are have good access to markets and sufficient water resources. It is unlikely, however, that breeding objectives conserving traditional crop characteristics as found in extensive systems would have been more successful. The authors identify systems caught in the agricultural transition from subsistence to intensified, market-oriented production as the most important target for crop improvement, and provide examples of new breeding objectives for cowpea, sorghum and upland rice. In each of these cases, breeders, with the help of physiologists, have developed innovative plant-type concepts that combine improved yield potential and input responsiveness with specific traditional crop characteristics that remain essential during the agricultural transition. In the case of cowpea, dual-purpose varieties were developed that produce a good grain yield due to an erect plant habit, then produce new leaves enabling a second harvest of green foliage. For upland rice systems that are limited by labour (mainly needed to control weeds that abound due to shortened fallow periods), a weed competitive plant type was developed from Oryza sativa × Oryza glaberrima crosses. Lastly, sorghum breeders who had previously deselected photoperiod sensitivity are now re-inserting sensitivity into plants having “modern” architecture, in order to allow for flexible sowing dates while maintaining an agro-ecologically optimal time of flowering near the end of the wet season. The ecophysiological basis of these plant types, their place in current and future cropping systems, as well as the problem of under-funding for their realisation, are discussed.     

Evaluation of the RZWQM-CERES-Maize hybrid model for maize production

The root zone water quality model (RZWQM) was developed primarily for water quality research with a generic plant growth module primarily serving as a sink for plant nitrogen and water uptake. In this study, we coupled the CERES-Maize Version 3.5 crop growth model with RZWQM to provide RZWQM users with the option for selecting a more comprehensive plant growth model. In the hybrid model, RZWQM supplied CERES with daily soil water and nitrogen contents, soil temperature, and potential evapotranspiration, in addition to daily weather data. CERES-Maize supplied RZWQM with daily water and nitrogen uptake, and other plant growth variables (e.g., root distribution and leaf area index). The RZWQM-CERES hybrid model was evaluated with two well-documented experimental datasets distributed with DSSAT (Decision Support System for Agrotechnology Transfer) Version 3.5, which had various nitrogen and irrigation treatments. Simulation results were compared to the original DSSAT-CERES-Maize model. Both models used the same plant cultivar coefficients and the same soil parameters as distributed with DSSAT Version 3.5. The hybrid model provided similar maize prediction in terms of yield, biomass and leaf area index, as the DSSAT-CERES model when the same soil and crop parameters were used. No overall differences were found between the two models based on the paired t test, suggesting successful coupling of the two models. The hybrid model offers RZWQM users access to a rigorous new plant growth model and provides CERES-Maize users with a tool to address soil and water quality issues under different cropping systems.     

基于深度相机的玉米株型参数提取方法研究

提出了一种基于骨架提取的改进算法,可实现在大田环境下,使用PMD深度相机快速、无损测量玉米株型参数。首先利用深度图像RGB伪彩色和深度距离信息,提取深度图像的骨架,排除复杂背景干扰,得到单株玉米的二值骨架图像;然后利用基于角点检测的改进归类算法提取骨架图像特征点;最后建立骨架图像中特征点与深度图像的对应关系,利用空间几何数学方法,结合特征点计算出玉米的3种株型参数,即株高、茎粗、叶倾角。农田实验对比分析表明,所提方法的株高测量结果与人工测量结果的相关系数 r 为0.986,最大相对误差小于2 cm,农田作物育种抗逆性分析还表明玉米株型参数与抗倒伏性具有显著相关性。     

汇流口水流水力特性研究综述

综述了60多年来对汇流口水流的研究成果，提出汇流口分为“Y”型汇流口与“非对称型”汇流口两类。汇流口水流存在水流停滞区、流速偏向区、分离区、流速加速区、混合层区等。影响汇流口的主要控制因素有：汇流比、汇流角、河床高差、宽深比、汇流口下游干流弗劳德数等。尽管对汇流口水流的研究已经获得了丰硕的成果，但依然存在不少的问题：1、对“Y”型汇流口研究较少；2、汇流口水面形态的研究存在争论；3、有无螺旋流及螺旋流形式存在争议；4、实验室研究成果与野外实测成果存在差异。