Developing a Recognition System of Gun-code

Intelligent recognition system of gun code is designed , which achieves online recognition of gun code. We applied video camera to get image, and some special technique in this deformed character recognition. As well, we applied dynamic template matching to get a better result.     

Simulation of High Pressure Startu Poil Pum Pof Turbine

Dynamic mathematical model, which is based on the character of the 200 MW tubine lbricating oil system, is established by means of modularization. On the basis of dynamic mathematical models, simulation model of the startu Pprocess of hign pressure startu Poil pum Pis created with the Visual Fortran language. The validity of this model has been verified by the simulation experiments and analysis. The simulation helps to forecast the dynamic characteristic to high pressure startu Poil pum Pand have some directive significance to design method of lubricating oil system.     

Analysis of Causes and Impacts of Soft Budget Constraints of Enterprises Based on Dynamic Game for Three Players

This paper researches the behavior difference among government,banks and enterprises and how it affects soft budget constraints of enterprises and non-performing loans of banks based with dynamic game.The game model suggests that government will give banks some assistance and let them refinance enterprises,especially government has strong(incentive) to sustain SOEs in China's transitional economy.Banks will do it if the assistance from government is more than the loss from refinance enterprises.In addition the value of liquidation of enterprises and the new loans affect banks' refinancing old enterprises.     

A NEW METHOD OF RESEARCHINE THE SITE DUPLE FACE DYNAMIC BALANCE OF MACHINE RIGID ROTATOR BASE DON AMPLITUDE MEASUREMENT

In this paper, a new method of researching; the site dupleface dynamic balance of machine rigid rotator, namely duple test weightmethod is presented. Weight the new method against the existing method,namely single test weight method [1], both the efficiency increasing and theenergy-consumming dicreasing would be forty percent and over, with thebasic points of vibration theory, the formula of calculating weight andposition of the duple face dynamic unbalance of a rotator by means ofapplying the duple test weight is developed in detail. The method in handll-ing distinct bearing form is also discussed. Rightness of the new method isproved out by the living example of the simulant contrast testing carried outn the dynamic balance test machine and the site balance for a rotatorsystem of motor.     

Application of Matter Element Analysis in Assessment of Ambient Air Quality

A new method for assessment of ambient air quality is proposed by using matter element analysis.This model is simple and reasonable in assessment.The practical example is given,and compared with other methods.     

3-RRPaR并联机构刚体动力学建模与分析

针对一种具有冗余结构的3-RRPaR并联机构,根据拉格朗日乘子法建立动力学模型,进而对冗余并联机构进行动力学分析。首先,分析了3-RRPaR并联机构的结构特征,确定了冗余结构的结构构型;然后,利用闭环矢量法建立并联机构的逆运动学模型,利用拉格朗日乘子法建立并联机构的动力学模型;最后,利用Matlab分别对并联机构空载和加载时的动力学方程进行数值求解,绘制了动力学响应曲线,根据拉格朗日乘子与约束力矩的关系求解出驱动杆的驱动力矩,将计算结果与ADAMS虚拟仿真结果进行对比分析,验证了动力学建模方法的正确性。结果表明,动平台加载后,驱动杆的驱动力矩也随之增大,但其数值变化规律与空载时基本相同。本研究为该并联机构的动力学控制和机构性能研究奠定了基础,也为其他结构冗余并联机构的刚体动力学建模提供了方法和思路。     

基于MATLAB/Simulink的单缸发动机动态仿真

以MATLAB的动态仿真工具箱Simulink为平台，应用联立约束法建立了单缸发动机曲柄连杆机构动态分析的仿真模型，并根据闭环矢量方程将相容性检验模块嵌入了仿真模型。代入S195柴油机的各项参数后执行仿真．结果表明该仿真方法能方便、准确地得到机构的运动、动力数据，能为机构的选型、优化设计提供参考依据。     

越野汽车机械自动变速器换挡规律的自适应控制

针对越野汽车载荷变化大、路况复杂而又要具有机动灵活的特点,利用自适应控制技术所建立的自适应控制器,对实际行车状况的油门、车速和冲击度进行在线估计。根据得到的实际的车辆负荷度,按照已经建立的最小和最大负荷度下的机械自动变速器换挡控制规律,通过线性插值法,建立适应实际行车状况的换挡规律,实现换挡规律的自适应控制。     

工况对发动机排气门失效的影响

发动机排气门在高温冲击环境下工作，恶劣的工况环境是使排气失效的重要原因之一。虽然在这种工况下，环境介质、气门机构的动力学特性都可使气门早期失效，但大量的研究表明：在正常情况下，影响气门失效的主要工况参数是温度及冲击次数。为此，讨论了汽车发动机工况对排气门失效的影响；探讨了进一步提高其使用寿命的有效途径。     

半固定管道式喷灌系统移管机的运动学与动力学分析

为了更加深入研究半固定管道式喷灌系统移管机，对其运动的确定性进行了论证，并对其运动性质和动力特性进行了分析计算。通过分析移管机的运动情况，得出了加速、匀速、减速过程中的运动方程；通过受力分析，得出了加速、匀速、减速过程中作用于行走轮的外加牵引力。