基于SD模型的长沙市水资源承载力研究

基于长沙市水资源现状,为平衡居民生活用水、经济生产用水和环境生态用水之间的关系,运用系统动力学方法,建立长沙市水资源-人口-经济-生态环境的耦合系统,模型模拟了现状延续型、经济发展型、节水治污型和综合协调型四种发展模式,选取GDP、人口数量、居民生活需水量、经济需水总量、供需压力作为主要评价指标。结果表明:第一、二、三产业分别保持10%、12%、12%年增长率且节流治污情况与现状延续型保持一致的方案,供需压力将达到节流治污方案的两倍多;经济生产用水对水资源供需压力的影响远大于居民生活用水和环境生态用水;通过适当降低人均用水量来平衡因人口数量增长而增加的居民生活用水是可行的。     

直通式调节阀内部流场分析

基于CFD对直通式调节阀内部流场进行了二维数值模拟,并得到了内部流动参数的可视化图形。对比25%和5%两种开度下,阀门处的压力,速度以及能量损失都存在很大的差异。25%开度下的压力、流速有明显的下降趋势,而5%开度下压力和速度则迅速变化。+两种开度下产生的涡流位置不同,5%开度下能量损失比25%开度下的要大。     

电压空间矢量脉宽调制的简单算法

在电压空间矢量脉宽调制(SVPWM)控制技术原理的基础上,提出了一种简单快速算法,该算法只有普通的四则运算,计算变得非常简单,消除了常规的空间矢量控制算法中由于三角函数和无理数的近似计算而带来的计算误差及影响计算精度和速度的缺点,使结果更加准确。因而更适合应用于基于DSP 的数字化控制。理论分析和大量的MATLAB仿真结果表明,该算法具有谐波含量低、直流电压利用率高的优点。     

基于HYDRUS-2D的地下滴灌下水分运移数值模拟研究

利用HYDRUS-2D软件模拟了地下滴灌条件下滴头周围黏壤土的土壤水分动态,并与田间观测进行对比;通过分析不同滴头流量对试验地土壤湿润模式的影响,明确了最佳灌水技术参数。结果表明,HYDRUS-2D软件模拟结果与观测值一致,体积含水率均方根误差为1.2%~4.5%,湿润范围均方根误差变化范围为2.1~3.87cm。     

Utilization of digital differential display to identify differentially expressed genes related to rumen development

This study aimed to identify the genes associated with the development of the rumen epithelium by screening for candidate genes by digital differential display (DDD) in silico. Using DDD in NCBI's UniGene database, expressed sequence tag (EST)‐based gene expression profiles were analyzed in rumen, reticulum, omasum, abomasum and other tissues in cattle. One hundred and ten candidate genes with high expression in the rumen were derived from a library of all tissues. The expression levels of 11 genes in all candidate genes were analyzed in the rumen, reticulum, omasum and abomasum of nine Japanese Black male calves (5‐week‐old pre‐weaning: n = 3; 15‐week‐old weaned calves: n = 6). Among the 11 genes, only 3‐hydroxy‐3‐methylglutaryl‐CoA synthase 2 (HMGCS2), aldo‐keto reductase family 1, member C1‐like (AKR1C1), and fatty acid binding protein 3 (FABP3) showed significant changes in the levels of gene expression in the rumen between the pre‐ and post‐weaning of calves. These results indicate that DDD analysis in silico can be useful for screening candidate genes related to rumen development, and that the changes in expression levels of three genes in the rumen may have been caused by weaning, aging or both. © 2015 Japanese Society of Animal Science     

Detection of Ecballium elaterium in hedgerow olive orchards using a low-cost uncrewed aerial vehicle and open-source algorithms

BACKGROUND

Ecballium elaterium (common name: squirting cucumber) is an emerging weed problem in hedgerow or superintensive olive groves under no tillage. It colonizes the inter-row area infesting the natural or sown cover crops, and is considered a hard-to-control weed. Research in other woody crops has shown E. elaterium has a patchy distribution, which makes this weed susceptible to design a site-specific control strategy only addressed to E. elaterium patches. Therefore, the aim of this work was to develop a methodology based on the analysis of imagery acquired with an uncrewed aerial vehicle (UAV) to detect and map E. elaterium infestations in hedgerow olive orchards.

RESULTS

The study was conducted in two superintensive olive orchards, and the images were taken using a UAV equipped with an RGB sensor. Flights were conducted on two dates: in May, when there were various weeds infesting the orchard, and in September, when E. elaterium was the only infesting weed. UAV-orthomosaics in the first scenario were classified using random forest models, and the orthomosaics from September with E. elaterium as the only weed, were analyzed using an unsupervised algorithm. In both cases, the overall accuracies were over 0.85, and the producer's accuracies for E. elaterium ranged between 0.74 and 1.00.

CONCLUSION

These results allow the design of a site-specific and efficient herbicide control protocol which would represent a step forward in sustainable weed management. The development of these algorithms in free and open-source software fosters their application in small and medium farms. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Gross anatomy,computed tomography,magnetic resonance imaging and bone mineral densitometry of the ovine metacarpo/metatarsophalangeal joint

This study was aimed to provide anatomical atlas of the ovine metacarpo/metatarsophalangeal joints using computed tomography (CT) scan and magnetic resonance imaging (MRI), as well as to investigate bone mineral density (BMD) and morphometric features of this joint. The limbs of twenty adult Sanjabi sheep were examined. Imaging was performed using a 16-slice multi-detector CT scanner and a 1.5 Tesla MRI scanner. The obtained images were correlated with corresponding anatomical sections. BMD was measured by Dual Energy X-ray Absorptiometry (DEXA) method. Also morphometric features included distance between metacarpal and metatarsal heads, width of metacarpal and metatarsal head, length, width and the height of the proximal sesamoid bones were measured. In MRI images, compact bones, ligaments and tendons showed less signal intensity (hypointense). The fatty tissue and bone marrow had more signal intensity (hyperintense), but articular cartilage and synovial fluid showed moderate signal intensity. BMD in the left hind limb was significantly higher than other three limbs (p ≤ 0.05). The length of proximal sesamoid bones in left forelimb was higher than right forelimb (p ≤ 0.05). The thickness of proximal sesamoid bones in left limbs was higher than those in their counterparts (p ≤ 0.05). The width of the medial head in the forelimbs was significantly greater than the hind limbs (p ≤ 0.05). The present results might be useful in managing the clinical techniques on this joint. Larger volume of the proximal sesamoid bones and wider medial head in the forelimbs compared to the hindlimbs impel this speculation that the centre of gravity is closer to the forelimbs.     

低雷诺数工况下锯齿型翅片性能的参数化研究

基于田口方法,结合均匀设计法对低雷诺数工况下错列锯齿型翅片进行三维参数化数值研究。以单层翅片组件为测试对象,对6种试件的试验表明,仿真结果与试验数据的趋势吻合良好,而存在差异的主要原因是试件加工工艺引起翅片表面存在毛刺。按照均匀设计法得到6因子5水平的11种仿真方案,引入田口方法的信噪比和贡献率,研究各几何参数对翅片性能的影响程度,依次为齿距、齿高、齿型角、错齿距、齿开窗宽度和齿厚。根据各水平下各可控因子的信噪比分布得到翅片的优化模型,并通过仿真验证了优化模型的有效性。     

群井开采条件下承压含水层渗流动态模拟

根据有限差分方法 ,编制了承压含水层渗流模拟软件。对某水源地在群井开采情况下地下水渗流动态进行数值模拟。模拟结果显示 ,位于高渗区的井 ,压降漏斗较其它井大 ,压力下降快。当地层中存在裂隙时 ,平行裂隙方向压力下降比垂直裂隙方向要快得多。抽水初期 ,地层压力下降很快 ,以后 ,压力下降逐渐变缓 ,位于低渗透区的井逐渐不能满足流量要求。因此做好地下水资源规划十分重要     

FLUENT软件及其在植保机械方面的应用

FLUENT软件是流体力学中通用性较强的商业软件之一，由于FLUENT软件的应用，节省了大量的人力和物力。对实际应用有重大的指导作用。为此，通过简述FLUENT在植保机械方面的应用实例，提出了FLUENT在植保机械方面的发展前景。