THE ANALYSIS OF MECHANICAL CONSTRUCTION OF SURROUNDING ROCKS IN THE PITCHING SEAM

Defferent forms of mechanical construction, the distribution of stress, and the process of the deformation destruction in the enclosing rocks in a working face of a pitching seam are analyzed according to its geological and mining specialities.     

THE APPLICATION OF SAND-GRAVEL-CUSHION TECHNIOUE IN THE FOUNDATION OF MOUNTAINOUS AREA

This paper presents the application of sand-gravel-cushion technique in thefoundation of mountainous area inhomogeneity and analyges non-uniformity of the foundation inmountainous,It is different from the traditional theory of sand-cushion,This is a new developmentand able to make a full use of the rock debris fill and the combinational soil-rock foundation in the mountainous areas.     

武汉市青山地区老粘土的变形参数及承载性能研究

基于室内土工试验和现场试验成果，对武汉市青山地区的老粘土地基的变形参数进行研究；利用ANSYS有限元软件对老粘土地基进行数值模拟，并与构筑物地基沉降实测值对比，对地基承载性能进行研究。在小于600kPa荷载的作用下，可用Ew作为沉降计算参数；老粘土具有较高的承载能力，由老粘土构成的地基，其承载能力可按《建筑地基基础设计规范》中推荐的公式计算。     

锦屏拱坝基础变形模量多目标非线

基础变形模量对坝体的安全运行和受力有着十分重要的意义，特别是高拱坝，需要良好的基础变形模量，但是在一定的荷载运行工况下，并不是意味着基础变形模量越高坝体应力、稳定、变形状况就越好。基于上述观点，利用多目标非线性规划方法对锦屏拱坝最优基础变形模量进行了研究，给出了拱坝在最优基础变形模量条件下坝体应力、稳定、变形及基础处理费用等特征值。研究表明：经过基础变形模量的优化，能有效改善坝体应力、位移、稳定等多项指标。     

滚珠丝杠的温升及热变形对策

对滚珠丝杠的温升及热变形的对策进行了探讨,提出解决温升和热变形的方法,为滚珠丝杠的设计、安装、使用和维修提供参考.     

滚珠丝杠的温升及热变形对策

对滚珠丝杠的温升及热变形的对策进行了探讨，提出解决温升和热变形的方法，为滚珠丝杠的设计、安装、使用和维修提供参考。     

芭蕉河面板堆石坝三维有限元应力变形分析

采用三维有限元法对芭蕉河面板堆石坝完建期(竣工期)和蓄水期的应力变形进行模拟计算，分析了不同时期坝体及面板的应力变形情况。计算结果表明，大坝应力变形满足安全要求。     

Numerical simulation of deformations and forces of a floating fish cage collar in waves

The dynamic behavior of a fish cage collar in waves was investigated using a numerical model based on the finite element method. The floating collar and mooring system were divided into a series of line segments modeled by straight massless model segments with a node at each end. To verify the validity of the numerical model, research data from other authors were cited and compared with the simulated results, the comparison of results showed a good agreement. The numerical model was then applied to a dynamic simulation of a floating cage collar in waves to analyze its elastic deformation and mooring line tension. The simulated results indicated that the greatest deformation of the collar taken place in the position of the mooring line connection point when incident waves were in the same direction. An increase in the length of mooring line would help to decrease the mooring line tension of the collar. Furthermore, the effects of collar dimension, including collar circumference, pipe diameter in cross-section, and pipe thickness, on the dynamic behavior of the floating collar were discussed. The results of this study provided a better understanding of the dynamic behavior of the fish cage collar.     

低压热水锅炉修复工艺

分析了低压热水锅炉锅筒变形的原因,通过采用镶补焊接等措施使修复后的锅炉各项技术指标达到国家标准,满足了使用要求。     

基于P300高性能BCI打字机的研究与实现

利用Gleeble-3800数字控制热/力模拟试验机研究了Q690低碳微合金钢在变形温度850~1150 ℃，应变速率0.01~30 s-1条件下的高温单道次压缩变形行为.建立了基于动态材料模型(DMM)的加工图，结合OM观察变形体微观组织确定了该钢种的高温热变形机制.结果表明：应变量0.7及以下的加工图中包含2个峰区(1 000~1 120 ℃，0.01~0.37 s-1和1 100~1 150 ℃，3.16~30 s-1)和3个加工失稳区(850~900 ℃，0.01~0.32 s-1和850~900 ℃，10~30 s-1以及1 000~1 085 ℃，1~30 s-1).应变量超过0.8的加工图包含2个峰区(1 025~1 100 ℃，0.01~0.38 s-1和1 100~1 150 ℃，3~30 s-1)，失稳区为低温(850~900 ℃，0.01~30 s-1)以及应变速率1 s-1以上的中低温度(850~1 100 ℃)范围，在这两个峰区峰值点附近的热变形显微组织为均匀的完全动态再结晶组织，因此，这两个区域均适合Q690钢的热加工变形.