Nonlinear Finite Element Analysis of RC Deep Flexural Simply Supported Beams Using Disturbed Stress Field Model

A nonlinear finite element analysis of 4 RC deep flexural simply supported beams with the program VT2 is presented. Crack development and failure modes , longitudinal reinforcement strain distributions and load -deflection curves were compared as a result in order to evaluate the validity of the disturbed stress field model to analyse such deep simply supported beam.     

A Muti-Objective Network Planning Model for Project

Based on the network planning model developed by the author for an overhaul project of a rolling mill production line in a heavy steel plant, an new multiobjective network planning model is proposed in this paper. The formulations of network time parameters are derived. The optimization problem of multiobjective network planning is also discussed. And it has been found out that the fractional single-objctive network is only one of the cases in this model.     

高产优质商品玉米生产模式：—三种遗传效应集成利用（TEU）

通过大量详实资料，对玉米杂种优势、雄性不育，油分基因花粉直感等3种遗传效应的研究现状作了详细概述，根据相关的遗传理论与实践，提出了将三种遗传效应进行技术集成的可能性，从而形成一种高产高油玉米生产模式，有可能是未来玉米生产的发展方向。     

Study on Genetic Fingerprinting Technique of Microbial Communities

The 99% of all microorganisms in naturecannot be isolated by standard culture methods without conspicuous external characters to classify them morphologically. In addition, classification based on physiological or biochemical features are often fuzzy. Molecular techniques are used for uncultured microorganisms to explore the diversity of microbial communities and novel resources without the need of cultivation. DNA dynamics and cloning of PCR products obtained from environmental DNA is now routinely used to identify microbial populations in microbial ecology. For practical reasons the approach is not suited to study the complex dynamics of microbial communities in environment. Genetic fingerprinting techniques are better tools, which give complement for the traditional microbiological methods. The methods are rapid and relatively easy to perform, and they allow the simultaneous analysis of multiple samples, which makes it possible to compare the genetic diversity of microbial communities from different habitats, or to study the behaviour of individual communities over time.     

棉花烂铃空间格局及抽样技术研究

本文通过聚集度指标（如：Ｃ、Ｋ、Ｃ＿Ａ、Ｉ、Ｉ＿δ、）测定，以及Ｉｗａｏ’线性回归、Ｔａｙｌｏｒ’ｓＳ￣２一回归和格局纹理分析，结果表明，棉花烂铃空间格而在一切密度下都呈聚集型，且聚集强度随烂铃密度的升高而增加，其空间格局的基本成分是疏松的个体群，其大小约为２～５株棉花，平均约含２．８４个烂铃个体，且个体群内的个体呈随机分布，经μ检验和方差分析，双对角线５点式、棋盘式和平行跳跃式等３种取样方法均适用于棉花烂铃田间调查，尤以双对角线５点式为佳，用双对角线５点式应样法调查的最适抽样数：一般病情普查至少１０个样方（每样方系５株棉花），系统测报和科研调查为２０～３０个样方。最后给出了棉花烂铃平均密度的零频率简易估计模型。     

五轴数控加工叶片无干涉刀位轨迹的计算

根据微分几何特性，提出五坐标数控加工叶片时对叶片的工作面和背面的刀位轨迹计算分开予以讨论，对工作面而言，利用平头立铣刀加工时不存在干涉，而对背面而言，可能存在干涉。根据干涉的种类，分别对全局干涉和局部刀具干涉提出了快速判定依据，并对干涉点进行了修正。指出利用Iso-scallop法可获得最优的轨迹和蔗，并给出了实例。     

聚晶立方氮化硼刀具的性能及其选用

聚晶立方氮化硼(PCBN)刀具已在切削加工的各个方面表现出了优异的切削性能,尤其是超硬特性被使用者所熟悉。为此,介绍了PCBN刀具的物理性能、切削性能以及常见的刀具结构形式;从刀具的几何参数、切削用量、使用条件、加工实例等几方面,论述了PCBN刀具的使用特点和要求。     

高度对色斑法测量雨滴粒径影响的试验研究

以前的色斑法雨滴率定只考虑色斑直径与雨滴真实粒径的关系，忽略了高度对率定的影响。在大量试验的基础上，通过回归分析，得到了以色斑直径和高度为变量的率定公式。研究表明，水滴下落高度小于5m时需考虑高度的影响；高度大于5m时，高度的影响可以忽略。通过相关性分析，公式的拟合性较好，对以后的色宽法测量雨滴粒径有指导意义。     

The River Wadu role play — ten years experience

This paper describes a role playing planning exercise that has been used for training agriculturists, engineers and agricultural economists for more than ten years. It sets out the objectives and key features of the exercise and the experience that has been gained in its use. The exercise has been found to successfully test and integrate subject matter expertise acquired from formal teaching. It also highlights the multiple and often conflicting objectives of irrigation planning, and the need for full evaluation of alternatives and sound technical judgements under conditions of inadequate data and time pressure. The exercise is also successful in developing professional personal skills such as group working, interviewing and presentation, and is recommended as an effective training aid.     

基于GIS技术的小型水库规划方法

在小流域治理中，为了提高水库规划的精确度和速度，提出了基于GIS技术来实现小型水库规划的方法。主要是基于GIS技术的库客曲线的制作方法；小型水库规划的可视化。在GIS中，真实地形在计算机中的表达用数字高程模型(DEM)表示，水库规划的三维可视化环境的实现需利用0penGL技术。