牧草根土复合体锯切力学模型和试验研究

通过分析切根刀工作时的受力状况,建立根土复合体锯切力学模型。在万能试验机上,用自制的锯式切根刀对白羊草构成的根土复合体进行锯切力学性能试验。分析结果表明:经回归拟合获得单位刀宽工作阻力的响应面数学模型,并与锯切力学模型进行比较,得到一常数,使得工作阻力可通过力学模型乘以该常数来计算;贯入深度与贯入阻力之间呈正比关系;切根刀在往复运动情况下,切根作业时上行和下行工作阻力存在差别,下行时的工作阻力大于上行工作阻力。     

柴油-甲醇-水复合乳化燃料的乳化工艺的试验

柴油-甲醇-水复合乳化燃料综合了柴油-水乳化燃料和柴油-甲醇乳化燃料两者的优点,日益引起了人们的注意。为此,介绍了两种制备柴油-甲醇-水复合乳化燃料工艺—CR-2型乳化装置法和电动机械搅拌法,并给出了相应的研究结果。     

有关钢与钢筋混凝土组合梁设计问题的概述

介绍了钢与钢筋混凝土组合梁的特点及设计内容,并简单归纳了组合梁中钢梁截面设计以及剪切连接件的作用和形式。     

Establishment and Analysis on Material Flow Model in Argo-animal Husbandry Ecosystem

This paper analyzed the material flow situation in argo-animal husbandry ecosystem by compartment model. This model was an important mean for investigating the whole structural characteristics in ecosystem. Based on this analysis, characteristics of material cycle and integrity in the system were mastered. As an example of natural conditions in Yonghe Village, Shuangcheng Township, Shuangcheng Municipal, Heilongjang Province, the system of linear differential equations in system was established by extracting each compartment and investigating material flow and stability of this model was proved by Lyapunov linear theory. The result showed that this system could not be interfered by initial value in the state of present, input and output.     

OK-50特效吸油材料的性能研究

通过试验，将公司自主研发的特效吸油材料OK-50应用于不同的油品吸附中，研究其适用油品种类、吸油量和保油率，得出该材料吸油倍率高，保油率也较高，使用范围较为广泛，应用前景广阔。     

浅析影响难胶材胶合的主要因素

文章介绍了难胶合材的主要特征。论述了影响难胶合材胶合的几个主要因素,诸如解剖结构特征、抽提物、PH值、密度和表面机械加工特征。     

Content and distribution of lithium in La Pampa soils (Argentina)

Abstract

Extractable li with ammonium acetate was determined by flamephotometry, in normal soils, alkaline soils and saline soils in the Province of La Pampa (Argentina).

The soils were originated from differents parent material, with various rainfalls (arid to subhumid climate) and management.

The higher contents were found in saline soils. In the other soils the extractable lithium content depends on the parent material, but not on rainfall.

Different patterns of vertical and horizontal distribution of extractable lithium were found.

The origin of extractable lithium is here discussed.     

基于ANSYS的木质基复合材料的静力学分析

采用有限元软件ANSYS对木质基复合板进行静力分析,分析其在加载过程中的位移和应力等情况,得出材料的变形及受力规律,以便人们在板的制作过程中对其大应力及大位移区做特殊处理,保证在使用过程中不因结构的部分失效而影响整个结构的工作。本文中分别就不同铺层方向四层结构复合板以及相同铺层方向单、四层等厚度板分别建立模型,并在相同受力与约束情况下进行静力学分析,得出一些对生产实际具有指导意义的结论。     

浮顶油罐大修中金属结构的涂装

浮顶罐大修中，金属结构的涂装工作量大，强度高，制定合理的朋修方案，选择适用的表面预处理方式，编制细致的涂装工序，是提高油罐大修的工作效率和保证施工质量的有效措施。