封闭型植物工厂发展现状与展望

经过多年探索和发展,封闭型植物工厂无论在材料、装置和技术都取得了快速进步,生产产量成数倍增长。在介绍发展封闭型植物工厂必要性的基础上,着重分析了封闭型植物工厂的发展现状、设施分类、栽培形式选择、栽培技术选择,最后指出了存在的问题,并对未来的封闭型植物工厂外部设施及其栽培技术进行了展望。     

深松整地作业技术要点

根据康平县在实施深松整地作业中遇到的实际问题,介绍深松机具的选择原则、作业质量标准、作业时间确定方法,以及作业技术要点和注意事项,为提高全县深松整地作业质量提供参考。     

Preparation of Adjuvant Diluent for Live Vaccine against Classical Swine Fever and Evaluation of its Immune Effects

The aim of this study was to develop a novel oil-in-water (O/W) emulsion as adjuvant diluents (AD) for live vaccine against classical swine fever (CSF) that could effectively enhance the immune effect of vaccine.The AD was prepared by high-pressure homogenization technique.Formulations and preparation parameters were optimized with response surface design.Its stability, particle size, polydispersity (PDI) and Zeta potential were characterized.The humoral immune response and cellular immune response of the AD were evaluated with BALB/c mice by intramuscular injection.The particle size of the AD prepared by optimized formulation and parameters was 100.4 nm, PDI was 0.147, and Zeta potential was —28.7 mV.The experiment results showed that the AD had good stability.The AD was inoculated combined with live vaccine against CSF into BALB/c mice by intramuscular injection.The results showed that the live vaccine against CSF specific immune responses could be evoked in mice by co-inoculation with AD and vaccine.The cellular immune response levels in co-inoculated groups were significantly higher than control group (P<0.05), with obvious phenomena of higher levels of IFN-γ, IL-6 and IL-4 in serum.The result revealed that cellular immune capability significantly improved with the AD.The results strongly revealed that cellular immune capability significantly improved by introducing AD for effective immune-adjuvant for live vaccine against CSF.     

中浙优8号在沙县作烟后稻种植表现及高产栽培技术

中浙优8号是中国水稻研究所和浙江勿忘农种业股份有限公司采用优质不育系中浙A与恢复系T-8配组而成的优质高产迟熟三系杂交稻新品种,经过3 a在沙县作烟后稻示范种植,表现群体整齐、分蘖力强、结实率高、米质较优、丰产稳产性好等特点。介绍其在沙县示范表现及高产栽培技术。     

现代机械制造工艺与精密加工技术探析

社会主义市场经济逐年发展，各行各业都在不断成长，机械制造工业也有了较大的发展，现代机械制造工艺的运用渐渐成熟。但是我国的机械制造基础比较薄弱，现代机械制造工艺与精密加工技术都需要深层的研究和实践。文章阐述了现代机械制造工艺和精密加工技术的基本情况，并分析了它们的特点，希望能够以此对现代机械制造工艺与精密加工技术有个明晰的介绍。     

盐阳离子类型对红壤裂缝开闭规律的影响

为了探究灌溉水中盐离子浓度及类型对土壤裂缝变化过程的影响,为南方灌溉用水安全提供数据理论支持,采用蒸馏水配置15,10,5和2.5 g/L等4个质量浓度梯度的NaCl,KCl,CaCl₂和MgCl₂等4种类型溶液,分别浸泡南方亚热带地区的典型红壤,并且采用恒温蒸发模拟干燥过程和喷湿法模拟增湿过程,结合数字图像技术提取土壤表层开裂闭合过程中裂缝主要几何参数,分析盐阳离子类型对红壤裂缝发育过程特征的影响.结果表明:红壤干燥过程中,裂缝在土壤质量含水率由30%降至10%时增长最快;在质量含水率低于10%后达到最大值并保持稳定不变.红壤的裂缝面积密度与4种盐阳离子浓度呈极显著正相关关系,裂缝长度密度与K⁺及Mg²⁺呈极显著负相关,与Ca²⁺呈显著负相关关系.4种盐阳离子对红壤开裂面积促进程度深浅顺序为Na⁺,K⁺,Ca²⁺,Mg²⁺;4种不同离子浓度的处理中,NaCl质量浓度为10 g/L,而KCl,CaCl₂和MgCl₂质量浓度为15 g/L的溶液对红壤开裂促进效果最好,其裂缝面积相比于蒸馏水处理分别增大了155.0%,160.1%,109.4%和39.2%.红壤的开裂含水率低于闭合含水率,4种盐阳离子浸泡后会使红壤的开裂含水率和闭合含水率均升高.     

水稻两段栽培技术在浉河区生产上的应用成效

介绍了水稻两段栽培技术的原理和方法,以及信阳市浉河区推广水稻两段栽培技术在减肥控氮、节本增效等方面取得的主要成效和主要做法。     

有机柑橘生产加工质量追溯的技术指标标准研究

根据农产品供应链理论和全面质量管理理论,采用文献检索、实地调研和比较分析的方法,建立有机柑桔的生产加工质量追溯体系的技术指标标准,包括产品来源追踪的产品批号和质量安全问题原因追踪的诸多因素,确保有机柑橘质量安全。     

番茄树在百色的引种表现及栽培技术

从育苗、定植前准备、定植、田间管理、病虫害防治、采收等方面对农业观光园番茄树京丹六号栽培技术进行总结。     

Evaluation of WARM for different establishment techniques in Jiangsu (China)

WARM is a model for rice simulation accounting for key biotic and a-biotic factors affecting quantitative and qualitative (e.g., amylose content, chalkiness) aspects of production. Although the model is used in different international contexts for yield forecasts (e.g., the EC monitoring and forecasting system) and climate change studies, it was never explicitly evaluated for transplanting, the most widespread rice establishment method especially in tropical and sub-tropical Asia. In this study, WARM was tested for its ability to reproduce nursery growth and transplanting shock, using data on direct sown and transplanted (both manual and mechanical) rice collected in 24 dedicated field experiments performed at eight sites in Jiangsu in 2011, 2012 and 2013. The agreement between measured and simulated aboveground biomass data was satisfactory for both direct sowing and transplanting: average R² of the linear regression between observed and simulated values was 0.97 for mechanical transplanting and direct sowing, and 0.99 for manual transplanting. RRMSE values ranged from 5.26% to 30.89%, with Nash and Sutcliffe modelling efficiency always higher than 0.78; no notable differences in the performance achieved for calibration and validation datasets were observed. The new transplanting algorithm – derived by extending the Oryza2000 one – allowed WARM to reproduce rice growth and development for direct sown and transplanted datasets (i) with comparable accuracy and (ii) using the same values for the parameters describing morphological and physiological plant traits. This demonstrates the reliability of the proposed transplanting simulation approach and the suitability of the WARM model for simulating rice biomass production even for production contexts where rice is mainly transplanted.