不同熔化速率下的电渣重熔过程数值模拟分析

电渣重熔能提高钢锭的质量,从而满足特种行业的需要,其过程伴随着复杂的物理现象,存在着磁流体流动、传热和传质以及电化学等多方面的影响。通过耦合电磁以及流动和温度方程对电渣重熔过程的三维瞬态进行了数学模拟,研究了熔化速率对重熔过程的影响。结果表明：电流密度、焦耳热和电磁力都随着熔化速率的增大而增大,当熔化速率由14.4 kg/h增加到27.0kg/h,电流密度、焦耳热和电磁力最大值的增大比例超过100%。随着熔化速率的增大,温度最大值有小幅的增加,而且速度最大值的增大幅度接近50%;金属熔池深度则由27 mm增大到38 mm,不利于保证铸坯的质量。     

THE BASIC PROPERTIES OF CONDITIONAL EQUATION WITH ACCUMULATIVE STATE

Several aspects of the conditional equation derived from the accumulative equation are discussed in detail. The results indicate that the conditional equation not only is well consistent with the principles of electronegativity and absolute hardness equalization, but also satisfies the bonding of a full -prerequisite condition, e. g. two like electronic charge species repel and unlike attract each other'. In addition these principles are in the accumulative state. Mathematically, some other aspects of the conditional equation are worth studying based on the generalization of this equation.     

Tentative Research About the Macroscopic Regulating to Blast

The paper analyzes the difference of the pathogenic varieties and the relationship of the variety composition,allording to the historic material to the varieties of the main hybid fece varieties in Southeast Sichuan during 1992 to 1998.It's the first time to advance to use the camparison on rate of pathogenic isolates between norm and refrieving to define the susceptible extent of the varity.It's an scientific base to adjust the structures of the vartieties,to reach the objective of the macroscopic regulating to rice blast.     

A Thermodynamic Criteria for Evaluation of Heat Exchanger Performance

The concept of loss rate of available energy was introduced for evaluating heat exchanger performance. At the same time, the general expression of loss rate of available energy was obtained for heat exchangers of several typical. And NL criteria was recommended for evaluation of the loss rate of available energy of heat exchanger. Then. the influences of inlet temperatures ratio, heat capacity ratio of fluids, the number of heat transfer units and flow patterns of heat exchanger on ,VL criteria were also discussed.     

EXPERIMENTAL RESEARCH ON VISCOELASTICITY OF HUMAN BLOOD- WITH REFERENCE TO THE EFFECT OF CELL HEMOTOCRIT

This paper describes a part of the experiments concerning the viscoelasticity of human blood, which are based upon the theories lead by the authors. The data from the experiments are compared with those in the literatures. The effect of cell hematocrit on viscoelasticity is especially discussed and a new viscoelasticity index is defined to eliminate this effect.     

Performance Analysis of Anti-CW Interference in MC-CDMA Systems

The multicarrier-code division multiple access (MC-CDMA),which is the combination of direct sequence CDMA (DS-CDMA) and orthogonal frequency division multiplexing (OFDM) techniques, offers various advantages over single-carrier CDMA system. Some of the advantages are that MC-CDMA systems possess can remove the intersymbol interference (ISI) and enhance narrow-band interference suppression capabilities. So the MC-CDMA technique becomes a focus in the field of mobile communication. The authors introduce the typical MC-CDMA system model, discuss the decision statisticalvariable in Rayleigh fading channel included the CW interference, and give the expressions of probability of error in uplink. An approach is proposed with Modified Equal Gain Combining (MEGC) to decrease the effect of CW interference. Theoretical analysis and numerical results show that the anti-CW interference performance of MC-CDMA system can be improved used the MEGC approach.     

Simulation of the penetration rate (ROP) of the air percussion drilling

It is difficult to calculate the penetration rate (ROP) of percussion drilling. In the early research, the empirical or semiempirical formulae of the ROP are derived from the laboratory or field data collected by the researchers. However, the ROP value of the formulae is not as accurate as that in the field. Benefiting from the dynamic model, the geometric structure model and the theory of the roller cone bit, the mathematical model of the hammer bit, the mathematical model of the true bottom hole and the mathematical model between the tooth and the rock of the hammer bit are established. Hence the ROP of the air percussion drilling can be predicted by simulation. Field tests show the models are reliable and the results are coincident with that in the field. The research can help to redesign the hammer bit and optimize the drilling parameters.     

An EOQ Model Taking Account of the Variable Selling Price Under Stock Dependent Selling Rate

In 1995, Padmanabhan and Vrat presented inventory models for deteriorating items with a constant selling price and stock dependent selling rate . Based on the result, in 2000, Kun-Jen Chung, Peter Chu and Shaw-Ping Lan devoloped the necessary and sufficient conditions of the existence and uniqueness of the optimal solutions of the profit per unit time functions without backlogging and with complete backlogging. Actually, the selling price need not be constant, it may be variable . This paper puts forward an EOQ model when the selling price is variable without backlogging, discusses the existence and uniqueness of optimum solution. The example is provided to illustrate the model. The theoretical evidence is provided for the inventory system to make management decision.     

The Convergence Rates of Improveed Kernel Estimators for Regression Function

The kernel function of kernel estimator for regression function is often defined with compact support, the moment of Y is bigger than one. The convergence rate of the improved kernel estimator is discussed under the improved kernel function. The result is also discussed under random censorship. The class of applicable kernels include those having unbounded support and even not integral .The condition of moment of Y is discarded under the improved kernel estimator. The results are wholly the same as usual and generalize the relative results of the paper .     

The Monitoring Measurements and Country Rock Control of NATM in Tunnel of Express Road during Construction

In this paper the author' s study on the monitoring measurement technique of NATM,the regularity and conditions of the country rock deformation are analysed based on the site measurement data in the west section of Zhongliangshan tunnel. The regression analysis of measure data for different measure lines of vavious country rock is done by the use of self-compiled CRAP program. The stability criterion for various rockmass and optimum time for primary and permanent support are provided. The conclusion available could conduct the theoretical research of NATM deeply as well as tunnel design and construction.