轮回选择在烟草育种中的应用及方法

提出了在烟草育种中应用轮回选择方法的必要性,综述了轮回选择改良群体的理论与方法和轮回选择在烟草育种中的应用效果,同时探讨了轮回选择在烟草群体改良中的应用特点和方法。     

兴山县优质烟叶产区植烟土壤养分动态状况分析

2010年在兴山全县选取1 995个植烟土壤样品进行分析,并与2000年土壤测定结果进行对比,研究兴山县优质烟叶产区(烟区)植烟土壤养分动态变化情况。结果表明,全区土壤有机质含量有所上升,但呈现两级分化趋势,土壤中全氮和碱解氮含量下降,土壤中全磷处于中偏低状态,全烟区普遍缺硼;兴山县烟区应根据"持续控氮、适度增磷,全面补硼"的原则进行施肥调整。     

北京龙耘种业有限公司

中单28是中国农科院作物所选育的高产、多抗、优质、中晚熟普通玉米单交种，其组合为中1128x中5493。2005年4月经北京市农作物品种审定，审定编号为：京审玉2005001。2007年3月经山西省农作物品种审定，审定编号为：晋引玉2007008。     

炭化条件对竹原纤维炭孔隙结构的影响分析

为研究炭化竹原纤维的特性,进一步提升竹原纤维的使用性能,拓宽竹原纤维的应用领域,采用可控电炉制备了不同炭化温度和不同保温时间条件下的炭化竹原纤维,利用全自动比表面积及孔隙度分析仪测试了炭化竹原纤维的比表面积、比孔容及平均孔径,探讨了炭化条件对其性能的影响。结果表明：随炭化温度的升高和保温时间的延长,炭化竹原纤维的比表面积、比孔容和孔径分布先增大后减小,在较优的工艺条件下,炭化竹原纤维的比表面积和比孔容最大值分别可达819.35m2/g和0.7358cm3/g,平均孔径最小可达2.0836nm。     

论生态景观吸引力空间异化模型的应用——以江苏环太湖国际旅游区规划为例

以江苏环太湖国际旅游区规划为实验对象,重点探讨生态景观吸引力空间异化过程,即从要素磁场分化开始,经由同质景观间的引力异化,导致同类景观片区间的引力空间异化,最终推导出另一种"同质相斥、异质相吸"的新型生态景观吸引力空间结构。     

普通烟草β-胡萝卜素羟化酶2基因克隆与生物信息学分析

β-胡萝卜素羟化酶(beta-carotene hydroxylase,BCH)是植物类胡萝卜素合成代谢中的关键限速酶,为获得烟草β-胡萝卜素羟化酶2(NtBCH2)基因序列,采用同源克隆法从烟草中分离NtBCH2的基因组DNA序列,基因登录号为JX101477。结果表明:1)同源克隆法从烟草中克隆出NtBCH2基因,NtBCH2基因组DNA全长2131bp,cDNA为1 083bp,含7个外显子和6个内含子。2)NtBCH2蛋白有309个氨基酸,分子量为34.79kD,具有7个糖基化位点,11个磷酸化位点,4个跨膜域。3)系统发育树与BLAST分析表明,NtBCH2是番茄的SlBCH和辣椒CaBCH2的同源基因;GENEVESTIGATOR数据库芯片结果表明,NtBCH2在幼嫩的茎和子叶中表达量最高。     

Density responses and spatial distribution of cotton yield and yield components in jujube (Zizyphus jujube)/cotton (Gossypium hirsutum) agroforestry

Trees are the dominant species in agroforestry systems, profoundly affecting the performance of understory crops. Proximity to trees is a key factor in crop performance, but rather little information is available on the spatial distribution of yield and yield components of crop species under the influence of trees in agroforestry systems. Also, little information is available on how crop density may be exploited to optimize the yield in such systems. Here we studied the performance of cotton in jujube/cotton agroforestry. Field experiments were conducted in 2012 and 2013 in Hetian, Xinjiang, China. Cotton was grown at a row distance of 60 cm in three densities, 13.5, 18.0 and 22.5 plants m⁻² in six m wide paths between tree lines in a jujube plantation. Plant density affected both cotton aboveground dry matter and yield significantly. The highest yield was attained at the intermediate density of 18.0 plants m⁻² (20.0 plants m⁻² corresponding in sole cotton), lower than the optimal density in sole cotton (25.0 plants m⁻²). Yield at the lower density was constrained by the low number of bolls per m² as a direct consequence of the low density, whereas at the high plant density yield was constrained by a lower allocation of assimilates to cotton seed and lint, as a consequence of intraspecific and interspecific competitions. There were strong gradients in yield and yield components in relation to the distance from the tree rows. Leaf area and total dry matter of cotton in rows close to the tree lines were reduced, especially in the rows next to the trees. Moreover, biomass allocation to cotton fruits was reduced in these rows. Competitive influences from the trees on cotton performance extended two rows deep in a six-year old jujube stand, and even three rows deep in a seven-year old stand. Shading effects on cotton yield were compensated by increasing plant density as a result of greater boll numbers per unit ground area. Data from this study help guide the design of optimal plant density of cotton in jujube plantations and give insight in the spatial distribution and dynamics of competitive effects in agroforestry systems in general.     

无缝烟夹不同针尖处理对烤后烟叶孔径的影响

为优化无缝烟夹装置设计,充分发挥无缝烟夹装烟方式的优势,对不同直径、不同形状针尖及不同方向的无缝烟夹烤后烟叶的针孔面积进行了比较研究。结果表明:不同直径烟针相比,3 mm直径无缝烟夹烤后针孔面积小于5 mm直径无缝烟夹;无缝烟夹在3 mm直径条件下,扁形针尖平行处理烤后针孔面积最小;在5 mm直径条件下,圆形针尖平行处理烤后针孔面积最小。     

探讨有机烟叶的生产和管理

概述了国内外有机烟叶的发展状况,并从品种筛选、基地选择、施肥、除草、病虫害防治、打顶、抹杈、调制、收购、包装、贮存和不适用烟叶处理方面探讨了有机烟叶的生产技术体系,从生产管理和质量管理2个方面探讨了有机烟叶的生产管理,并对有机烟叶的发展进行了展望。     

行株距配置对烟田微生态环境、烤烟光合特性及产值的影响

为了探索适宜武陵山区烟叶生产的最佳栽培行株距配置,采用田间试验,研究了烤烟不同行株距搭配对烟田微生态环境、烤烟光合特性及烟叶产值的影响。结果表明:(1)适宜的行株距配置能为烟株创造良好的烟田微生态环境;(2)行距0.12 m、株距0.40 m配置和行距0.12 m、株距0.60 m配置的叶片净光合速率最大,行距0.11 m、株距0.40 m配置和行距0.11 m、株距0.50 m配置的胞间CO2浓度较高,行距0.12 m、株距0.40 m配置的叶片蒸腾速率显著高于其他处理,行距0.11 m、株距0.60 m配置的蒸汽压亏缺显著高于其他处理;(3)从产量和产值上看,行距0.12 m、株距0.40 m配置表现较优,且其上等烟比例和均价都较高。综合分析,武陵山区烟叶适宜的栽培行株距配置为行距0.12 m,株距0.40 m。