旱作多功能精密穴播轮的研究

通过旱作多功能精密穴播轮工作机理的研究,建立了容种、充种、清种、成穴过程相关数学模型,揭示了穴播轮转速、容种高度对播种质量的影响规律。     

水稻直播机船底板下流体的数值模拟

利用有限元分析软件ANSYS中的计算流体动力学模块(FLOTRANCFD),对船底板下的流体进行模拟和分析,讨论在考虑形状损失和摩擦损失时,船底板下流体的流线和流动情况。通过对流体的仿真得出:船底板横挡板的前倾角对船底板下流体的流线和流量有较大的影响,并得出在倾角30o和60o时有较好的流动情况。     

The feasibility of using variable rate water application under a central pivot irrigation system

The purpose of this paper was to assess the feasibility and significance of applying spatially variable irrigation under a central pivot system at the Federal German Agricultural Research Center, Braunschweig, Germany. The assessment was based on soil moisture holding capacity, soil depth variation and root development. Soil texture analysis was carried out by sampling on a 60 meter grid. The German Agro-Meteorological Model was applied to simulate the water balance in the crop-soil-atmosphere system for the growing season 2003/4. The research findings are presented in terms of six scenarios: 20, 30, 40 mm water application depths per irrigation under both variable rate application and uniform application. The comparison revealed that the loss of water was higher for the uniform application scenarios than that for the variable rate application (VRA) scenarios for the applications of 20 and 30 mm. The VRA scenario of 20 mm water application was found out to be the best option for water conservation.     

A model of decision-making and information flows for information-intensive agriculture

This paper describes the development of a systems based model to characterise farmers’ decision-making process in information-intensive practices, and its evaluation in the context of Precision Agriculture (PA). A participative methodology was developed in which farm managers decomposed their process of decision-making into brief decision statements along with associated information requirements. The methodology was first developed on a university research farm in Denmark and further revised during testing on a number of research and commercial farms in Indiana, USA. Twenty-one decision-analysis factors were identified to characterise a farm manager’s decision-making process. Then, a general data flow diagram (DFD) was constructed that describes the information flows “from data to decision”. Illustrative examples of the model in the form of DFDs are presented for a strategic, a tactical and an operational decision. The model was validated for a range of decisions related to operations by three university farm managers and by five commercial farmers practicing PA for cereal, corn and soybean production in Denmark and in Indiana, USA.     

玉米精播机漏播补偿系统设计

目前玉米免耕播种机的播种质量仍低于常规播种。本文讨论了微机控制的排种监测及漏播补偿装置，通过机电结合手段解决漏播问题。台架试验表明本装置能够准确发现漏播，并通过采取的措施实现及时补种，补种成功率可达90％以上。     

基于GIS的精确农业合理采样与施肥间距研究

在GIS软件平台下对采样点进行行列删减,人为减小采样密度,运用地统计学方法制作养分分布图,并与原始采样方案进行形状和面积对比,选取合理的删减方案作为土壤养分的合理采样方案.碱解氮、速效磷和速效钾的合理采样间距分别为64 m×51 m、32 m×76 m和32 m×25 m.为综合考虑多种养分,提出3条综合采样测土原则.提出了调整施肥间距的实现方法,自动变量施肥宜采用"大网格采样、小网格施肥",手动变量施肥则宜采用"小网格采样、大网格施肥".试验表明提出的方法实现了定性与定量相结合来研究土壤采样间距.     

磁吸式精密排种原理分析与试验

针对蔬菜、花卉种子体积小、质量小及形状不规则的特点 ,提出了一种新的排种方式——磁吸式精密排种。应用有关磁选理论 ,建立了磁吸式精密排种的力学模型 ,得出了单粒磁粉包衣种子在气隙磁场中所受磁力的计算公式 ,分析了实现精密排种的基本条件。通过对白菜、番茄种子的排种试验 ,其单粒精播率达 90 % ,漏播率低于5 % ,说明这一排种方式具有较高的播种精度和对不同类型种子良好的适应性。     

液力变矩器性能测试系统及提高测试精度研究

建立了一套基于工业PC微机的变矩器试验数据自动采集与处理系统，论述了硬件组成结构、数据采集、传输方式及数据处理软件的功能，并对提高测试系统精度的方法进行了研究。某一新开发的液力变矩器试验结果表明，该系统运行方便、快捷，测试计算结果准确、可靠。本研究可为提高一般国产试验设备的测试能力及测试精度提供一些借鉴。     

内窝孔式棉花精量穴播轮的试验

目前,新疆棉花种植广泛采用半精量穴播轮,其原理是勺式取种,存在下种量大、重播率高、下种不均匀、后续工作量大等缺陷,已不适应当前棉花产业发展要求。气吸式精量穴播轮可实现一穴一粒,准确率高,但气吸式棉花穴播机结构复杂、造价高,对机具维护、使用者技能以及整地有较高要求。另外,作业时拖拉机须保持高速运转,能源消耗大,因而限制了气吸式精量穴播轮的普及和推广。为此,将内窝孔取种原理应用于棉花精量取种,介绍了内窝孔式穴播轮的结构和工作过程,并进行了排种试验和分析。由试验得知,内窝孔式取种原理可用于新疆棉花的精量取种。     

光电控制穴盘精密播种装置的研究

根据水稻工厂化育秧农艺的要求，设计了穴盘精密播种装置，该装置以PIC16C57为核心，采用光电一体化技术来控制电磁振动排种器，使其每次只排出一粒种子，提高了播种精度，降低了漏播率。试验表明，该播种装置的单粒率达98%以上，重播率小于2%，漏播率为零。