木质剩余物复合材料老化问题的分析

论述和分析木质剩余物复合材料老化的原因,主要有木质剩余物的老化、胶粘剂的老化、木质剩余物的回弹和膨胀—收缩应力。综合论述木质剩余物复合材料加速老化试验方法,指出木质剩余物复合材料在加速老化试验方面的研究,适宜采用ASTM D1037六循环加速老化法和老化仪检侧法。分析木质剩余物复合材料老化的影响因素,如温度、湿度、试件尺寸等。     

松材线虫病防治技术存在问题及建议

就松材线虫病的防治技术所存在的问题以及相应的措施作详细的探讨,使松林资源得到有效的保护。     

Association of brook trout and Oncorhynchus spp. with large wood jams in a Lake Superior tributary in a northern old‐growth watershed

Wood in streams functions as fish habitat, but relationships between fish abundance (or size) and large wood in streams are not consistent. One possible reason for variable relationships between fish and wood in streams is that the association of fish with wood habitat may depend on ecological context such as large‐scale geomorphology. We studied the relationship between salmonid assemblages and large wood jams (LWJ) in four settings that differed geomorphically at the scale of the stream corridor along a tributary to Lake Superior in old‐growth conifer–hardwood forest in northern Michigan. The focal fish species of this study were brook trout (Salvelinus fontinalis), which were wild in the stream. Relocation efforts for coaster brook trout (an adfluvial life history variant of brook trout) were ongoing in the study stream. We measured fish abundance and length in pairs of pools of similar size and substrate, but varying in the presence of LWJ; this allowed us to evaluate associations of fish simply with the presence of LWJ rather than with other channel or flow‐shaping functions of LWJ. The length of Oncorhynchus spp. and young introduced brook trout was not strongly correlated with LWJ presence; however, the presence of LWJ in pools was positively correlated with larger wild brook trout. We also found that the correspondence of LWJ with the abundance of salmonids appears to be moderated by the presence of alternative habitat in this relatively natural, old‐growth forest stream.     

木材流体渗透理论与研究方法

为较全面系统地了解木材流体渗透理论研究现状,从流体在多孔介质内的主要类型与流动理论、流体在木材内的主要流通通道及木材流体渗透性研究的主要理论与试验方法等几方面进行综合概述,提出木材流体渗透性理论研究的主要发展方向.试验观察应采取更先进的手段,动态观察流体尤其是液体渗透木材的整个连续过程,并构筑更合理的木材流体简化结构渗透模型,以较少的参数反映更完整的流体渗透途径;理论研究应借鉴木材干燥过程中应用较成熟的传质传热模型,建筑多孔材料如水泥、石、砖等的渗透性研究,土壤流体渗透性及地下石油流体渗透性研究方面应用较成熟的理论和方法,并拓宽木材渗透性的研究对象,建立符合木材非稳态渗透实际过程的二维或三维理论模型,以更逼真地模拟木材流体渗透过程;2种方法结合起来,定性和定量完整描述木材流体渗透机制.     

云南松直干、弯干材木材结构比较观察

利用光学显微镜对云南松直干、弯干材木材构造进行解剖学观察，结果表明：弯干材在解剖结构上跟直干材基本保持一致。与直干材相比，弯干材的早材比直干材的早材窄，树脂道多；早、晚材管胞的长度、壁厚、弦向直径差幅分别为：0．14、0．63、4．4、13．56、-0．46、0．81；最大交叉场纹孔数和最大单列射线细胞个数比直干材分别多1个和2个；纺锤形射线高度超出直干材的51．73％。弯干材具有右旋扭转纹。另外，两种材料都是较好的造纸原料，且以弯干材为优。     

木粉/PVC复合材料挤出流动性的影响因素

研究木粉的粒径、添加剂的种类及配比等因素,对木塑复合材料挤出流动性的影响.结果表明:木粉粒径越小,复合物料在挤出过程中的流动性能越差,所制备的木塑复合材料色差越大,且产品材色越深.综合考虑加工特性和制品材色,宜选用木粉粒径45～60目；并添加稀土热稳定剂及铝酸酯偶联剂,可以提高物料的挤出流动性.     

中国明对虾组织蛋白酶L 的原核重组表达及其组织分布

组织蛋白酶L属于半胱氨酸蛋白酶中的木瓜蛋白酶超家族,在哺乳动物中它与抗原提呈、肿瘤入侵和转移、骨质吸收、细胞凋亡等许多生命活动有关。但对其在无脊椎动物中的功能了解的不多。从中国明对虾(Fenneropenaeus chinensis)中克隆得到了组织蛋白酶L基因,为了进一步研究组织蛋白酶L的组织分布及其功能,对该基因进行了重组表达。将中国明对虾组织蛋白酶L基因的酶原片段亚克隆进原核表达载体pET30a中,转化大肠杆菌BL21(DE3),再进行诱导表达,表达产物经SDS-PAGE电泳检测,其分子量在40kD左右,与期望的中国明对虾组织蛋白酶L的分子量一致。表达产物形成包涵体,经过对包涵体变性和复性,并进行His-tag柱亲和纯化,得到了纯化的蛋白。利用重组蛋白制备了的兔抗血清。Western实验表明,组织蛋白酶L在中国明对虾的肝、胃、肠中有表达,而在卵巢中没有表达。     

无（微）损检测技术在木结构古建筑中的应用及发展

介绍了古建筑木构件勘查中常用的无（微）损检测技术,阐述了各种仪器工作原理、检测方法及其优缺点,其中包括皮罗钉、阻力仪、应力波和超声波检测设备。基于以上技术,结合古建筑木构件特点,提出仪器结合使用、构件分类检测、设备便携化以及以树种鉴定为基础的木结构古建筑无损评估体系。

Abstract：

Commonly used nondestructive inspection technologies involved in the survey of the wood structures of ancient buildings are introduced and the inspection methods,working principle,advantages and disadvantages of various instruments,including of pilodyn,re     

Mixed acylation of Scots pine sawdust and impact on hydrophobicity

Abstract

Acetic–fatty esters of Scots pine sawdust (SPS) were obtained by reaction of SPS with mixtures containing acetic–fatty anhydrides and no solvent or catalyst. Such mixtures were synthesized by reaction between a carboxylic acid and acetic anhydride. The global reaction of acetic anhydride and a fatty acid yields at equilibrium a mixture of five compounds: acetic–fatty anhydride, acetic anhydride, fatty acid, acetic acid and fatty anhydride. The influence of temperature, molar ratio, reaction time and length of the fatty chain on the esterification and on the ratio of grafted acetyl/fatty acyl was investigated. Static contact angles (CAs) with water were measured over 5 min. CA values were dependent on the fatty acyl content and independent of the acetyl content. The minimum ester content of the oleoyl group required to obtain permanent water repellency was 25 mmol kg^?1. Water vapour adsorption measurements indicated that in contrast to water repellency, hydrophobicity to water vapour was correlated with the total mass acyl content.     

旋切定心与上木技术的发展

着重论述了旋切定心与上木技术发展的几个阶段，详细介绍了每个阶段的定心与上木技术，阐述了旋切定心与上木技术的发展趋势。