三种速生杨木材物理力学性质的比较研究

测试、分析比较了不同树龄3种速生杨木材的物理力学性质,结果表明:①树种对物理力学性能有较大的影响,三倍体圆叶毛白杨的物理力学性能最好,三倍体裂叶毛白杨次之,中林-46最差;方差分析表明,3种杨树的主要物理力学性质均达到显著和极显著差异。②树龄对物理力学性质的影响不大,随着树龄的增长,不同杨树木材的密度已趋于稳定,但力学性能有上升的趋势;方差分析表明,抗截切强度和抗弯强度受树龄影响较大,差异达到显著水平,其他性质无显著差异。     

人工三倍体桑树新品种嘉陵16号遗传背景的AFLP分析

（1西南大学农业部蚕桑学重点实验室,重庆 400716;2中国林业科学研究院林业科学研究所 北京 100091; 3西南大学园艺园林学院,重庆 400716）     

长牡蛎二倍体和三倍体外套膜的差异

本文从外观、组织切片、蛋白质和糖元含量等方面分析了长特蛎二倍体和三倍体外套膜的差异。与二倍体相比,三倍体外套膜厚、不透明、呈乳白色、结弱组织较厚,糖原含量高３．９倍。     

银腺杨与毛新杨正反交三倍体选育

采用花粉染色体人工加倍获得的银腺杨 (Populusalba×P .glandulosa)、毛新杨 (P .tomentosa×P .bolleana)未减数 2n花粉 ,施加一定剂量的辐射处理后杂交 ,两杂交组合共获得 16株三倍体 .其中银腺杨×毛新杨组合以1470rad处理最佳 ,三倍体得率 3 .8% ;而毛新杨×银腺杨 (16 80rad)则获得了高达 12 .9%的三倍体 .三倍体整体生长水平优势明显 ,单株生长更为突出 ,2年生实生苗的苗高和地径最高 4.9m和 5 .8cm ,分别超出群体平均值的5 8%和 176 % ;并且正反交三倍体的遗传效应差异明显 .利用未减数 2n花粉 ,经花粉辐射处理杂交选育杂种三倍体 ,将是今后白杨乃至杨属植物育种的最有效途径之一 .     

不同方法制备的三倍体长牡蛎养殖效果的比较

比较了细胞松弛素B(CB)和6-二甲基氨基嘌呤(6-DMAP)通过抑制受精卵极体释放的方法批量诱导三倍体长牡蛎的养殖效果.长牡蛎卵子在25℃的海水中受精,20～30min后,开始用浓度为0.5mg@L-1的CB处理,持续18～22min,受精卵处理密度为4.0～4.5×107个@L-1,三倍体产率为65.2%～70.1%,面盘幼虫孵化率为12.3%～14.5%,诱导效率指数为0.09.6-DMAP的使用浓度为400～420μmol@L-1,受精卵处理密度为3.0～3.5×107个@L-1,授精水温、处理起始和持续时间等与CB方法相同,三倍体产率为58.7%～65.4%,面盘幼虫孵化率为52.1%～55.4%,诱导效率指数为0.32.两种方法的采苗率基本相同,采苗器为基质较硬的栉孔扇贝贝壳.海区养殖采用浮筏夹苗吊养技术,两种方法诱导的三倍体牡蛎养殖性状没有明显差别.通过比较CB和6-DMAP两种诱导方法及三倍体的养殖效果表明,后者具有更好的应用性.     

离体培养条件下三色堇多倍体诱导研究

 在离体培养条件下,研究了秋水仙素不同浓度、不同处理时间对三色堇实生苗的诱变效果。结果表明:三色堇对秋水仙素较为敏感,以0.1%～0.2%秋水仙素处理12～36 h为佳,最高诱变频率可达到26%. 同时以二倍体三色堇为对照,对四倍体三色堇的形态特征和光合作用特性进行了初步研究。研究发现四倍体三色堇叶色浓绿、叶片肥厚、花大、花瓣厚、香味浓、气孔和花粉粒巨大。同时四倍体净光合速率、水分蒸腾速率和气孔导度均比二倍体高。并将四倍体与二倍体杂交首次获得了三倍体三色堇。     

Comparative growth performances of diploid and triploid Chinese shrimp Fenneropenaeus chinensis (Osbeck, 1765) under different salinities

This study aimed at evaluating the ploidy effects on growth performances of Chinese shrimp ( Fenneropenaeus chinensis Osbeck, 1765) reared in different salinities under laboratory conditions. In the acute salinity experiment, there was no difference ( P >0.05) in tolerance observed in triploid and diploid shrimp due to abrupt salinity changes. The lethal salinity for 50% of the individuals in 96 h at 23–25 °C was about 2 g L⁻¹ in both triploids and diploids. While for the chronic salinity experiment, statistical analyses confirmed that the differences in growth performances including the specific growth rate (SGR), the feeding rate (FR), feed conversion efficiency (FCE) and intermoult period (IP) between triploid and diploid were related to salinity. Diploid shrimp reared in 20 g L⁻¹ exhibited highest SGR ( P <0.05), while triploids performed well in 20 and 30 g L⁻¹ salinities ( P <0.05). Based on the survival and growth data, the optimal salinity for the culture of diploid F. chinensis should be 20 g L⁻¹ and for triploids it should be between 20 and 30 g L⁻¹.     

Comparative studies of the growth,survival, and reproduction of diploid and triploid Kumamoto oyster,Crassostrea sikamea

Triploid oysters have been used for farming to improve growth but have not been created in the Kumamoto oyster, Crassostrea sikamea, which is one of the crucial aquaculture species on the southern coast of China. In the present study, triploids were created using cytochalasin B to inhibit polar body II release in C. sikamea, with the untreated oysters as controls. Triploidy rates of 87 and 57.67%, on average, were obtained in larvae and adults, respectively. Larval growth and survival of the triploid were significantly lower than that of the controls (p < 0.05). In contrast, the triploid postlarvae and adults had a significant growth advantage over the controls (p < 0.05) during the period of 180 (December) to 450 days (September of the next year). Moreover, the triploids clearly exhibited significant sterility in the reproductive season. The glycogen and triglyceride contents in the gonad, adductor muscle, mantle, and gill were higher in triploids than in controls from 180 to 450 days. As a result, high physiological energy supply was strongly correlated with superior growth and reduced reproduction in triploid C. sikamea. The triploid C. sikamea is an excellent oyster species and can be used to improve growth for C. sikamea farming.     

Improvement of wood properties by urea-formaldehyde resin and nano-SiO2

In order to improve wood properties of triploid clones of Populus tomentosa, urea-formaldehyde (UF) resin was compounded with nano-SiO₂, coupling agents and flame retardants in different ways to prepare five kinds of modifiers. The poplar wood samples were impregnated with the modifiers and heated to prepare UF-SiO₂-wood composites. The antiswelling efficiency, resistance of water absorption, oxygen index and hardness of the composites were measured. Results show that all of the modifiers reduced water absorption of poplar wood and enhanced flame resistance and hardness. Nano-SiO₂ showed a marked effect in improving the hardness of wood. In addition, all of the modifiers, except UF-C-SiO₂-polymer, improved the dimensional stability of poplar wood. The UF resin and nano-SiO₂ compound improved general properties of poplar wood. __________ Translated from Journal of Beijing Forestry University, 2006, 28(2): 123–128 [译自: 北京林业大学学报]     

宁夏黄灌区三倍体毛白杨无性系苗期生长规律研究

对三倍体毛白杨无性系苗期生长发育过程及其生长规律进行了初步研究,并对苗期高生长与气候因子间关系进行了灰色关联分析。结果表明,三倍体毛白杨无性系生长发育具有明显的阶段性,生长进程呈现慢-快-慢的规律,并存在明显的速生期。