Influence of MUD on the System Capability of CDMA

In CDMA communication system, the relativities between users result in Multiple Access Interference (MAI). With the increase of users, MAI becomes the main jam of broadband CDMA communication system. Multi-User Detection (MUD) is the most important technology of anti-jamming in the broadband CDMA communication system, which can eliminates MAI effectively by using the information of all user signals to detection single. This paper analyze the expression of system capability without MUD and with MUD, and puts forward the way to increase system capability by using MUD. Then the influence of MUD on CDMA system capability is discussed by MATLAB emulation. Basing analysis and emulation, the conclusion is got: the higher the MUD efficiency, the better the improvement of CDMA system capability; under the same MUD efficiency, the lower data rate, the smaller inter-cell interference, the lower the ratio of bit energy to power spectrum, the better the improvement of CDMA system capability.     

湿式多盘制动器的研究现状及展望

分别对国内外在湿式多盘制动器摩擦副间对流换热机理、摩擦衬片压力分布规律、摩擦偶件温度场与应力场的分析、摩擦衬盘与对偶钢盘的摩擦机理、制动噪声、制动过程的影响因素、整体散热特性及其试验研究等方面的研究现状进行了综述和评价，并对湿式多盘制动器的某些研究内容提出了新的见解，最后展望了湿式多盘制动器的研究方向及其发展动态。     

Case study on an integrated operation planning of multiple reservoirs for irrigation in Japan

In spite of several attempts at integrated operation planning, multiple reservoirs in Japan have been operated by trial and error without any formal rules. Subjects of integrated operation are not only showing optimal usage of daily storage levels as an operational policy but also providing a countermeasure for droughts.Objectives of this study are to make a formal operation rule of multiple reservoirs for irrigation using the theory of Required Storage for Drought Curve (RSDC) Method and to propose operational policy for multiple reservoirs as large water supply systems. The Iwaki river basin, on which there are four reservoirs for irrigation parallel with each other, is considered to be a model river basin with a large water system for this case study.From results of simulations using historical data, comparing an individual operation rule with an integrated operation rule on several indices, effectiveness of the latter rule is recognized. Under integrated operation, water losses are minimized and excessive water conservation can be avoided over the whole area to benefit while target river discharge is maintained at key control points because water usage from all reservoirs is well balanced in relation to water availability.     

A Framework for Valuing Ecological Services of Irrigation Water – A Case of an Irrigation-Wetland System in Sri Lanka

In many countries, irrigation water is usedfor several purposes other than irrigatingfield crops. In Sri Lanka, irrigationwater from canals, wells, and reservoirs isused for domestic purposes, industry,livestock, and fisheries, and it alsocontributes to sustain the environment. However, policy makers and water managersin irrigation systems only take intoaccount water used for irrigating the fieldcrops and sometimes water used for domesticpurposes. Owing to the failure torecognize the different uses and users ofwater, the water in irrigation systems hasbeen undervalued. This paper presents theenvironmental impact of irrigation and aframework for valuing water for itsmultiple and often competing uses,especially focusing on water uses forecological services, in this case wetlands.The south coastal area of Sri Lanka wasselected as a site for a case study, including2,610 ha of irrigated area and adownstream wetland area of 2,250 ha whichhas five lagoons. This wetland areacombines coastal, marine and freshwaterecosystems in a tropical environment inwhich distinct plant and animal speciescoexist in a delicate balance. All users ofwater and other resources, and theirenvironmental problems were identified. Thispaper discusses the policy and managementimplications of valuing water for competinguses.     

多孔管的变径设计

要保证孔口压力差不超过允许范围条件下，一条多孔管可由两种管径不同的管段组成，即采用变径法设计。本文考虑了影响多孔管沿程压力的因素，导出了各种地形坡度下变径设计计算公式。这一方法可供喷灌及微灌工程设计参考。     

基于AT89S52和DS18B20的多点温度检测报警系统

为了对温室大棚室温实施监测、避免局部温度过高,利用多片DS18B20单总线型数字温度传感器,采用外部供电方式,结合AT89S52单片机,外加串口电路、报警电路以及显示模块,设计了多点温度测量并报警的硬件系统。依据DS18B20型温度传感器操作指令,首先读取各传感器的序列号,并确定传感器对应的各点位置关系,定时循环读出各个传感器的温度值并循环显示,单片机依据设定的报警温度上下限做出报警处理;同时,也可利用串口把各点的温度值传给上位机作进一步的处理。实例表明,该系统工作稳定,操作方便,成本低廉,实现了温室大棚中的多点温度检测以及越限报警功能,测温误差在±0.5oC以内。     

水科学中应用数理统计方法应注意

对回归方程误差的影响因素进行了分析，导出了回归方程的均方误差与其影响因素之间的关系式。分析表明，复相关系数(或相关系数)一定时，倚变量的变差系数越大，回归方程的均方误差就越大；回归分析时，应对回归方程的误差进行分析。对于样本均值估计总体均值，给出了基于误差限制的样本容量的计算式。研究表明，应考虑样本变差系数对估计精度的影响。     

多孔管沿程压力分析

针对目前多孔管沿程水头损失计算方法存在的问题,推导出了一个新的多孔管沿程水头损失近似计算公式。利用导出的公式,分析了多孔管沿程的压力变化,这无论是对喷、滴灌工程的规划设计,还是对多孔管水力特性的进一步研究都是有益的。