Agreement between direct, oscillometric and Doppler ultrasound blood pressures using three different cuff positions in anesthetized dogs

ObjectiveTo evaluate the agreement between invasive blood pressure (IBP) and Doppler ultrasound blood pressure (DUBP) using three cuff positions and oscillometric blood pressure (OBP) in anesthetized dogs.Study designProspective study.AnimalsNine adult dogs weighing 14.5–29.5 kg.MethodsThe cuff was placed above and below the tarsus, and above the carpus with the DUBP and above the carpus with the OBP monitor. Based on IBP recorded via a dorsal pedal artery catheter, conditions of low, normal, and high systolic arterial pressures [SAP (mmHg) <90, between 90 and 140, and >140, respectively] were induced by changes in isoflurane concentrations and/or dopamine administration. Mean biases ± 2 SD (limits of agreement) were determined.ResultsAt high blood pressures, regardless of cuff position, SAP determinations with the DUBP underestimated invasive SAP values by more than 20 mmHg in most instances. With the DUBP, cuff placement above the tarsus yielded better agreement with invasive SAP during low blood pressures (0.2 ± 16 mmHg). The OBP underestimated SAP during high blood pressures (?42 ± 42 mmHg) and yielded better agreement with IBP for mean (MAP) and diastolic (DAP) arterial pressure measurements [overall bias: 2 ± 15 mmHg (MAP) and 0.2 ± 16 mmHg (DAP)].ConclusionsAgreement of SAP determinations with the DUBP is poor at SAP > 140 mmHg, regardless of cuff placement. Measurement error of the DUBP with the cuff placed above the tarsus is clinically acceptable during low blood pressures. Agreement of MAP and DAP measurements with this OBP monitor compared with IBP was clinically acceptable over a wide pressure range.Clinical relevanceWith the DUBP device, placing the cuff above the tarsus allows reasonable agreement with IBP obtained via dorsal pedal artery catheterization. Only MAP and DAP provide reasonable estimates of direct blood pressure with the OBP monitor evaluated.     

Impact of mechanized harvesting on compaction of sandy and clayey forest soils: results of a meta-analysis

Context

Nowadays, harvest operations are predominantly performed fully mechanized using heavy tractors or forestry machines. The resulting soil compaction may negatively affect the soil ecosystem.

Aims

We wanted to draw general conclusions concerning the impact of mechanized harvesting on forest soil bulk density and the influencing factors.

Method

Therefore, we combined the data of several studies using a meta-analysis approach.

Results

The impact decreased from the surface towards deeper soil layers. At 0?C10?cm depth, the impact on clayey soils was highest although not significantly different from the impact on sandy soils. Higher initial bulk densities, i.e., on already compacted forest soils, generally led to smaller extra increases of bulk density after machine traffic. For sandy soils, the impact was also significantly smaller when machines were lighter. No significant relationship was observed between the compaction degree and traffic intensity.

Conclusions

We observed clear compaction on both clayey and sandy soils, especially in case of low initial soil compaction degrees and heavy machines. The compacted initial state of many forest soils, the long recovery period, and the generally high impact of the first passes that is frequently mentioned in literature all count in favour of designated skid trails and an adjustment of the machine type to the job.     

Dating branch growth units in a tropical tree using morphological and anatomical markers: the case of Parkia velutina Benoist (Mimoso?deae)

Context

In tropical areas, studies based on the retrospective analysis of tree development have focused principally on growth ring research. The interpretation of primary growth markers is overlooked although it opens perspectives to provide long time-series on tree-crown development.

Aims

This study focused on Parkia velutina, an emergent tree of neotropical rain forests. Our objectives were (1) to characterize the phenological cycle of this species, and (2) to identify temporally interpretable morphological and anatomical markers.

Methods

We collected dominant branches in 14 adult trees and identified growth markers that limit longitudinal and radial increments. We coupled this approach with a 2-year phenological survey of 20 trees.

Results

Leaf shedding, growth unit elongation and growth ring formation define the phenological cycle. At tree scale, this cycle is synchronous and affects all axes. At population scale, trees can be desynchronized. This cycle is annual despite some slight variability. Successive growth units and growth rings are easily identifiable.

Conclusion

Dating a branch by counting the number of growth units or growth rings is possible in many years with a reasonable error. Nevertheless, estimating their precise month of formation in order to study climatic influences remains difficult.     

Phenotypic plasticity and climatic adaptation in an Atlantic maritime pine breeding population

Context

Pinus pinaster Ait. is found in the Iberian Peninsula under Mediterranean and Atlantic conditions. Both climates encounter each other in Galicia (NW Spain), where two bioclimatic regions can be differentiated: coastal and inland. A breeding program was launched in the coastal area, with two breeding and deployment areas delimited.

Aims

We analyse plasticity patterns across regions in a coastal breeding population to assess the suitability of current breeding areas and how genetic material will likely respond to future climate.

Methods

Total height at ages 3 and 8?years was assessed in 16 trials established along the coast and in inner Galicia. Clustering of environments with similar genotypic performance, family sensitivities to climatic factors and stability analyses were performed.

Results

Sizeable genetic variation in plasticity was found among families, and crossover genotype-by-environment interactions were detected within and between regions. It was unfeasible to regionalize Galicia into alternative areas of stable genotypic performance. Only the cold regime was found to noticeably underlie the array of phenotypic responses to changing environmental conditions.

Conclusions

Results suggest that previous delimitation in two breeding areas is pointless and indicate reduced effects of a changing climate towards Mediterranean conditions on decreasing population fitness.     

Physicochemical and Enzyme Characterization of Small and Large Starch Granules Isolated from Two Maize Cultivars

In this study, some morphological, physicochemical, and the initial characterization of the starch granule enzymes of blue and white maizes of small and large granules are described. Starch was isolated from blue and white maizes, and the small and large granules were separated. The efficiency of separation was higher in large granules than small of the blue maize starch. The amylose content was slightly greater (1.3%) in large granules than smaller in both starches studied. No differences in the average gelatinization temperature were found between large and small granules, but the enthalpy of gelatinization value was higher in the small granules. The electrophoretic pattern showed that the granule‐bound starch synthase (GBSSI) had higher expression in large than small granules and that explain the higher amylose content in the former granules. The differences showed in the starch biosynthesis enzymes in small and large granules might explain partially the physicochemical and functional properties of maize.     

Independent segregation of two isozyme markers and inter-plant differences in nuclear DNA content in the interspecific backcross (Allium fistulosum L. × A. cepa L.) × A. cepa L.

Summary From backcrosses of three interspecific hybrids (A. fistulosum x A. cepa) with a. cepa 14 diploid and 2 triploid plants were recovered.In this BC1 population introgression of A. fistulosum genetic material into the A. cepa nuclear genome was studied using two isozyme markers: Got-1 and Got-2. Both loci carried two alleles. A. cepa was monomorphic for both markers. A. fistulosum was polymorphic for Got-2. Based on their Got isozyme pattern seven out of the 14 diploid BC1 plants had a recombinant genotype. The loci appeared to be unlinked. Differences were observed in nuclear DNA contents between the diploid BC1 plants, indicating that gametes produced by the interspecific hybrids contained different combinations of chromosomal material from A. cepa and A. fistulosum.Abbreviations Adh alcohol dehydrogenase - Got glutamate oxaloacetate transaminase - Idh isocitrate dehydrogenase - Pgi phosphoglucoisomerase - Pgm phosphoglucomutase     

Constraints using the liquid fraction from roadside grass as a bio-based fertilizer

Background

Roadside grass cuttings are currently considered a waste product due to their association with road sweepings as contaminated waste, therefore, their potential as a biofertilizer is understudied.

Aim

This study aimed to determine whether grass liquid fraction (GLF) collected from a roadside verge in Maldegem, Belgium, and pressed using a screw press was suitable as a biofertilizer.

Methods

The characterization of the heavy metal content of the GLF was conducted using an ICP-OES. From May to September 2019, a pot experiment was set up using a randomized block design to compare tomato plant growth, yield, and nutrition for GLF-treated plants to two commercial fertilizers and tap water as a control.

Results

The heavy metal content of the GLF was below the maximum permissible concentrations (MPCs) for organic fertilizers as set out by the European Comission fertilizer regulation 1069/2009 and 1107/2009 (European Comission, 2019). However, despite having a fairly well-balanced nutrient content (0.1% N, 0.04% P₂O₅, and 0.2% K₂O), GLF had a negative effect on the growth, root weight, and yield of the tomato plants, killing six out of ten plants. GLF also promoted mold growth in the soil of some plants. Since the GLF was uncontaminated, heavy metal toxicity did not cause the negative effect.

Conclusions

Previous research showed that liquid fractions from some plants negatively affect the growth of others due to allelopathic chemicals; this, together with the stimulation of fungal growth, could have caused the negative effects observed. Future experiments will investigate the herbicidal property of GLF and possible treatments to potentially recover the nutrients contained within the GLF for application as a biofertilizer.     

Particle arrangement and internal porosity of coarse fragments affect water retention in stony soils

Information about water retention in stony soils lags behind due to methodological difficulties. We applied a new strategy to measure the water retention in soils with coarse fragments (CFs) and to get insights into the effect of CFs porosity on water retention. Water retention at zero, 10, and 150 m suction, bulk density, and the mass fraction of six particle size classes were measured in undisturbed blocks from soils with variable CFs contents, originating from three parent materials. The results showed that some soils contain porous CFs (2–250 mm) with a water holding capacity as high as the fine fraction (<2 mm). The water held in the suction range of 1–150 m in a soil with porous CFs was twice as high as in soils with non-porous CFs. Multilinear regressions revealed that both the water retention capacity at 1 m suction and in the range 1–150 m were more dependent on bulk density than on the fraction of CFs and fine particles. In the soil with porous CFs, there was no correlation between their fraction and soil water retention. These results show that the bulk water retention capacity of soils with CFs is underestimated when not considering the internal porosity of the CFs. A better understanding of the effect of the porosity of CFs on bulk soil porosity and water retention is important to propose suitable pedotransfer functions and refine physically-based hydraulic functions for stony soils.     

Modelling the effect of surveillance programmes on spread of bovine herpesvirus 1 between certified cattle herds

For the eradication of an infectious agent, like bovine herpesvirus 1 (BHV-1), surveillance and certification can be used to reduce the transmission between herds. The goal of surveillance is that a certified herd that becomes infected is detected timely so that infection of several other certified herds is prevented. What counts is whether the reproduction ratio R, i.e. the average number of certified herds infected by one infected certified herd can be kept below 1. To support policy makers in making decisions about the minimal demands for a surveillance programme in an eradication campaign of BHV-1 in cattle, two mathematical models were investigated. With these models, the basic reproduction ratio between herds was calculated. The surveillance programmes were characterised with sample size, sampling frequency, test sensitivity, herd size, vaccination status, and contacts between herds. When R between herds is below 1, then the surveillance programme is sufficiently good to prevent spread of infection, provided that R is estimated well. In the model based on bulk milk testing sample size was replaced by a threshold at which bulk milk can be found positive. The R between herds was mainly influenced by the vaccination status, sampling frequency, and contacts between herds. Herd size moderately affected the outcome. Test sensitivity and sample size, however, were of minor importance. If herds of 50 cows became free of BHV-1 without vaccination, then spread of infection between herds might be prevented when animals within herds are sampled once a year (milk or blood samples). This frequency needs to be intensified, being twice a year, for larger herds and/or herds with extensive contacts with other herds. When bulk milk is sampled instead, sampling should be done at least every 5 months and more intensively, being each month, with larger herd sizes and more contacts between herds.     

Selection for growth rate or against back fat thickness in pigs is associated with changes in growth hormone axis plasma protein concentration and mRNA level.

Selection for increased growth rate or decreased back fat thickness results in concomitant changes in endocrine and metabolic status. Growth hormone (GH) changes in blood plasma concentration related to selection for growth rate and fat deposition were reported in pigs. The molecular mechanisms regulating selection-induced changes in GH plasma concentration remain largely unknown. We investigated selection-associated changes in GH axis parameters in 2 pig lines selected for increased growth rate (F-line), or decreased back fat thickness (L-line), respectively. First, we investigated selection-associated changes in GH pulse parameters. In both selection lines we found each generation a declining GH peak maximum concentration and area under the GH curve. GH pulse width was not associated with generation number. In both lines generation number was associated with a declined pulse interval, indicating that the number of pulses per day increased on average with 1 pulse per 24 h per generation. Second, plasma concentration of GH axis related Insulin-like growth factor-I (IGF-I) and insulin were investigated. Plasma IGF-I concentration was not associated with generation number in the F-line. Mean plasma insulin concentration declined each generation in both lines. Third, we investigated changes in GH and Pit-1 mRNA levels. In both selection lines GH and Pit-1 mRNA levels increased approximately 50% each generation. The high SD of the GH mRNA levels in both lines may suggest that the GH mRNA levels are pulsatile in vivo. We postulate a molecular mechanism that may explain how selection is associated with increased GH mRNA levels and GH pulse numbers, while lowering GH release per pulse.