Soil Organic Carbon and Soil Physical Characteristics as Affected by Land Uses under Semiarid Irrigated Conditions

ABSTRACT

Rice-Wheat rotation is the dominant land use in the state of Punjab, resulting in over exploitation of ground water resources. Thus, it is necessary to evaluate other land uses that requires less water and are sustainable. The present investigation was planned with four land uses viz., fallow (FLU), rice-wheat (ALU), grasses (GLU) and pear (PLU) with respect to their effect on soil organic carbon and soil physical characteristics in surface and subsurface depth in district Ludhiana, Punjab. The soil organic carbon (SOC) content was higher by 10, 30.9 and 24.9% under rice-wheat, grasses, and pear than that under fallow. The grasses showed higher soil moisture characteristics curve (SMCC) and lower bulk density (Db) than that under rice-wheat. The larger mean weight diameter (MWD) were observed under pear, grasses and fallow than that under rice-wheat by 0.21, 0.51 and 0.41 mm, respectively. The saturated hydraulic conductivity (K_s) was higher in magnitude by 56.1, 55.4 and 28%, respectively under PLU, GLU and FLU over ALU. Of the evaluated land uses, pear and grasses proved to be more sustainable by retaining more moisture, maintaining better soil physical characteristics and SOC under semiarid irrigated conditions in the state on long term gradual response.     

Effect of nitrogen root zone fertilization on rice yield,uptake and utilization of macronutrient in lower reaches of Yangtze River,China

Improper application of nitrogen (N) has led to high N losses and low N use efficiency in the lower reaches of Yangtze River in China. An effective method to solve such problems is the deep fertilized N in root zone (RZF). Limited information is available on the effect of RZF on the uptake of macronutrients (N, P and K) and rice yield. Field experiments, conducted from 2014 to 2015, compared the farmer fertilizer practice (FFP, with 225 kg ha^?1 of N, split into three doses) and RZF using the same rate but placing N 5 cm away from rice roots in holes 10 cm deep (RZF10) or 5 cm deep (RZF5) as a single application. The highest mean yield (10.0 t ha^?1) was obtained in RZF10, which was 19.5% more than that in FFP. Root zone fertilization of urea (whether 10 cm deep or 5 cm deep) resulted in greater accumulation of N, P and K in stem, leaf sheaths, leaf blades and grains compared to that in FFP in sandy and in loam soils. The uptake of N, P and K was the highest in RZF10 (average at 176.7, 66.2 and 179.1 kg ha^?1, respectively), higher than that in FFP by 45.0, 17.0 and 22.6%, respectively. N apparent recovery efficiency was markedly higher in RZF10 (53.1%) than in FFP (27.5%). RZF10 significantly increased the N, P, K uptake compared with FFP under different N rates in both sandy and loam soils. These results suggest that the N, P and K input amount should be re-determined under RZF.     

Silage and total mixed ration hygienic quality on commercial farms: implications for animal production

Implications of silage hygienic quality for animal production were investigated on forty‐five dairy farms in South West England. Samples of grass and maize silages and of total mixed rations (TMR) were obtained together with information on silage technology, herd size and animal production. Samples were analysed for mycotoxins, bacteria, yeasts, moulds and chemical composition. Thirteen mycotoxins were assayed, but none were detected in the samples of grass silage. However, mycotoxins were found in 0·9 of all maize and other silage samples, with deoxynivalenol and zearalenone predominating. There was no relationship between total mycotoxin concentration and mean lactation milk yield per cow. Enterobacteria counts tended to be higher in maize silage than in grass silage and higher still in TMR – a cause for concern. There were no relationships between mould counts and mycotoxin concentrations in silages, implying that mycotoxins may have been produced in the field pre‐ensiling.     

Evaluation of Particle Size Influence on Proximate Composition,Physicochemical, Techno-Functional and Physio-Functional Properties of Flours Obtained from Persimmon (<Emphasis Type="Italic">Diospyros kaki</Emphasis> Trumb.) Coproducts

The aim of the work was to study the influence of particle size in the composition, physicochemical, techno-functional and physio-functional properties of two flours obtained from persimmon (Diospyros kaki Trumb. cvs. ‘Rojo Brillante’ (RBF) and ‘Triump’ (THF) coproducts. The cultivar (RBF and THF) and particle size significantly affected all parameters under study, although depending on the evaluated property, only one of these effects predominated. Carbohydrates (38.07–46.98 g/100 g) and total dietary fiber (32.07–43.57 g/100 g) were the main components in both flours (RBF and THF). Furthermore, insoluble dietary fiber represented more than 68% of total dietary fiber content. All color properties studied were influenced by cultivar and particle size. For both cultivars, the lower particle size, the higher lightness and hue values. RBF flours showed high values for emulsifying activity (69.33–74.00 mL/mL), while THF presented high values for water holding capacity (WHC: 9.47–12.19 g water/g sample). The bile holding capacity (BHC) and fat/oil binding values were, in general, higher in RBF (19.61–12.19 g bile/g sample and 11.98–9.07, respectively) than THF (16.12–12.40 g bile/g sample and 9.78–7.96, respectively). The effect of particle size was really evident in both WHC and BHC. Due to their dietary fiber content, techno-functional and physio-functional properties, persimmon flours seem to have a good profile to be used as potential functional ingredient.     

Improvement of ink-jet printing performances using β-cyclodextrin forming inclusion complex on cotton fabric

Cotton fabric was modified with β-cyclodextrin (β-CD) forming inclusion complex to yield color strength, pattern sharpness, and color fastness for ink-jet printing. The modified cotton fabric was confirmed with the presence of new strong absorption peaks around 1713 cm^-1 and 1243 cm^-1 in FT-IR. β-CD had been covalently grafted on cotton fabric via the esterification reaction of citric acid (CTR) with cellulose and β-CD. The results indicated that printing performances of the ink-jet printed fabric were enhanced through β-CD modification. The K/S value was enhanced from 4.21 to 6.72, the width of printed line was decreased from 1.48 mm to 1.25 mm, and the color fastness was improved to 3-4 level. These improvements were due to the truncated cone structure of β-CD, which can form inclusions with water-based pigment. Meanwhile, the crease recovery performance was also improved with the aid of CTR. A comparison between the unmodified and modified cotton fabric suggested that the crease recovery angle of β-CD modified cotton fabric was increased by 25.0 % in the warp direction. Therefore, printing performance and crease recovery performance of β-CD modified and water-based pigment printed cotton fabric were enhanced remarkably.     

Diversity of root-knot nematodes in Moroccan olive nurseries and orchards: does <Emphasis Type="Italic">Meloidogyne javanica</Emphasis> disperse according to invasion processes?

Background

Root-knot nematodes (RKN) are major pest of olive tree (Olea europaea ssp. europaea), especially in nurseries and high-density orchards. Soil samples were collected from main olive growing areas of Morocco, to characterize Meloidogyne species and to discuss the contribution of biotic and abiotic factors in their spatial distribution.

Results

RKN were found in 159 soil samples out of 305 from nurseries (52.1% occurrence) and in 11 out of 49 soil samples from orchards (23.2% occurrence). Biochemical and molecular characterisation (PAGE esterase and SCAR) revealed the dominance of M. javanica both in nurseries and orchards with minor presence of M. incognita only in nurseries, and M. arenaria in only one nursery. RKN were distributed on aggregated basis. Frequent presence of M. javanica in orchards might have come from nurseries. In contrast, the detection of M. incognita in nurseries alone suggests that this species could not reproduce in orchards because of either the competition with other plant-parasitic nematodes or unfit local habitats. The impact of environmental variables (climate, habitat origin and physicochemical characteristics of the substrates) on the distribution of Meloidogyne species is also discussed.

Conclusion

Olive nurseries in Morocco are not able to guarantee the safety of rooted plants. As a result, olive production systems are exposed to strong RKN invasion risks. Consequently, the use of healthy substrates in nurseries may prevent plant-parasitic nematode induction in orchards.

     

Soil protection for a sustainable future: options for a soil monitoring network for Ireland

The increased recognition of the importance of soil is reflected in the UN Post‐2015 Development Agenda with sustainable development goals that directly and indirectly relate to soil quality and protection. Despite a lack of legally binding legislation for soil protection, the European Commission remains committed to the objective of soil protection. However, the achievement of a legally binding framework for soil protection relies on the implementation of a soil monitoring network (SMN) that can detect changes to soil quality over time. As beneficiaries do not pay for the provision of soil information, the options for soil monitoring are limited. The use of existing data sets should be considered first. Using Ireland as an example, this research explored the opportunities for a SMN for Ireland considering three existing national data sets. The options for a SMN are considered in terms of their spatial and stratified distribution, the parameters to be measured and an economic analysis of the options proposed. This research finds that for Ireland, either a 10 or a 16 km² grid interval stratified by land use and drainage class offers the best potential in relation to the spatial distribution of existing data sets to reflect local data at a national level. With existing data, the stratified SIS data using the 16 km² grid offers the best value for money, with baseline costs for analysis, excluding field costs, of between €706 481 and €2.8 million. Acknowledging the impossibility of measuring all parameters with ideal frequency, this study proposes a two‐tier system for optimized monitoring frequency. Parameters must anticipate future policy requirements. Finally, the implementation of a SMN must be accompanied by standardized methods, defined thresholds and action mandates to maintain soil quality within allowable limits.     

High water content silk protein-based hydrogels with tunable elasticity fabricated via a Ru(II) mediated photochemical cross-linking method

Silk is very promising in the field of biomaterials as a natural biomacromolecule. Silk protein can be made into various forms of materials, including hydrogels. However, silk protein-based hydrogels have not attracted much attention due to its weak mechanical properties. Here, we report high water content silk protein-based hydrogels with tunable elasticity which were fabricated through Ru(II) mediated photochemically cross-linking tyrosine residues in regenerated silk protein. The regenerated silk protein was characterized by Fourier transform infrared spectroscopy (FTIR). The gelation kinetics of the silk protein was studied by rheology measurements. The compressive mechanical properties of the silk protein-based hydrogels was investigated using compressive tests and dynamic mechanical analysis (DMA). Compressive modulus of the hydrogels reached 349±64 MPa at 15 % strain. The fabricated silk protein-based hydrogels were also characterized by Scanning electron microscopy (SEM), revealing an interconnected porous network structure, typical of hydrogels, with an average pore size of approximately 130 μm. Finally, biocompatibility of the silk protein-based hydrogels was demonstrated through cell culture studies using a human fibroblast cell line, HFL1. The reported silk protein-based hydrogels represent a promising candidate for biomaterial applications.