Do cover crops change the lability of phosphorus in a clayey subtropical soil under different phosphate fertilizers?

Plants have developed different mechanisms to absorb and solubilize phosphorus (P) in the soil, especially in environments with low P availability. This study evaluated the effects of different winter cover crops on soil P availability in a clayey subtropical (Hapludox) soil receiving soluble P fertilizer and a rock phosphate applied to the summer crop, under no‐tillage. The experiment was carried out over 3 yrs (2009–2011) with five different cover crop species: common vetch, fodder radish, ryegrass, black oat, white clover and fallow as control. The soil was sampled after the third year of cover crop cultivation and analysed for inorganic and organic P forms according to the well‐established Hedley fractionation procedure. Phosphate fertilizers promoted accumulation of both labile and nonlabile P pools in soil in the near surface layer, especially under rock phosphate. Fertilizer applications were not able to change P fractions in deeper layers, emphasizing that the Brazilian clayey soils are a sink of P from fertilizer and its mobility is almost nil. Although the cover crops recycled a great amount of P in tissue, in a short‐term evaluation (3 yrs) they only changed the content of moderately labile P in soil, indicating that long‐term studies are needed for more conclusive results.     

Changes in wettability of wood surface using electron beam irradiation

ABSTRACT

This study deals with the influence of electron beam irradiation (EBI) on the wettability of Norway spruce surface samples. To evaluate this possible effect in detail, the changes in chemistry and wood structure were analysed using the methods of IR spectroscopy and Scanning Electron Microscopy (SEM). The surface wettability was determined by the contact angle measurement method. The results of infrared spectra show decreased relative numbers of available hydrophilic groups (e.g. hydroxyl and carbonyl groups) in the wood surfaces due to the electron beam irradiation. This behaviour is consistent with the values from the surface wettability measurements. Structural differences of the wood surfaces after electron beam irradiation were not detectable. Based on these findings pre-treatment of wood surfaces for industrial usages can be a potential field of application of this technology.     

Comparison of outcomes following treatment of septic calcaneal bursitis by needle or bursoscopic lavage: A retrospective study of 29 horses

Sepsis of the calcaneal bursae (CB) presents significant treatment challenges with limited clinical data available in the literature. The objective of this retrospective cohort study was to assess the clinical outcomes associated with CB lavage using either a through-and-through needle or bursoscopic technique. Clinical records of 29 horses treated for septic calcaneal bursitis using either technique between 2005 and 2019 were reviewed. Fisher’s exact test was used to assess statistical significance between first surgical technique and success at first surgery (i.e. not requiring >1 lavage), survival to discharge and return to work (RTW). Bursoscopy was performed in 13/29 (44.8%) cases, and needle lavage in 16/29 (55.2%). In the needle group, 12 (75%) horses were discharged following the first surgery. Four had repeat interventions; two (12.5%) had needle lavage and two (12.5%) had bursoscopy. Of the two horses to have repeat needle lavage, one was subjected to euthanasia and one discharged, and of the two that underwent bursoscopy, one was discharged and one received a third bursoscopy prior to discharge. In the bursoscopy group, seven (53.8%) were discharged and three (23.1%) were subjected to euthanasia following the first surgery. Three (23.1%) received a second bursoscopic lavage with one discharged, one subjected to euthanasia and one having a third bursoscopic lavage prior to discharge. Overall, 18/24 (75%) followed up cases RTW, 10 (55.5%) from the needle group, eight (44.4%) the bursoscopy group. No statistically significant differences between first surgical technique used and success at first surgery (no subsequent lavage(s) required), survival to discharge or return to work were detected. The main limitations of this study are that it is a retrospective study, has a small population with limited statistical power and potential selection bias. No statistically significant differences existed between the outcomes of the two techniques, contrary to the belief that bursoscopic lavage is superior. Larger, multicentred studies, with greater statistical power are required to further assess this relationship.     

Impact of weather variables and season on sporulation of Phytophthora pluvialis and Phytophthora kernoviae

Phytophthora pluvialis and Phytophthora kernoviae are the causal agents of important needle diseases on Pinus radiata in New Zealand. Little is known about the epidemiology of the diseases, making the development of control strategies challenging. To investigate the seasonality and climatic drivers of sporulation, inoculum traps, consisting of pine fascicles floating on water in plastic containers, were exchanged fortnightly at five sites in P. radiata plantations between February 2012 and December 2014. Sections of needle baits were plated onto selective media and growth of Phytophthora pluvialis and P. kernoviae recorded. To explore the generalizability of these data, they were compared to detection data for both pathogens from the New Zealand Forest Health Database (NZFHDB). Further, equivalent analyses on infection of Rhododendron ponticum by P. kernoviae in Cornwall, UK allowed the comparison of the epidemiology of P. kernoviae across different host systems and environments. In New Zealand, inoculum of P. pluvialis and P. kernoviae was detected between January–December and March–November, respectively. Inoculum of both species peaked in abundance in late winter. The probability of detecting P. pluvialis and P. kernoviae was greater at lower temperatures, while the probability of detecting P. pluvialis also increased during periods of wet weather. Similar patterns were observed in NZFHDB data. However, the seasonal pattern of infection by P. kernoviae in the UK was the opposite of that seen for sporulation in New Zealand. Phytophthora kernoviae was likely limited by warmer and drier summers in New Zealand, but by colder winter weather in the UK. These results emphasize the importance of considering both environmental drivers and thresholds in improving our understanding of pathogen epidemiology.     

Development of colchicine‐induced tetraploid St. Augustinegrass (Stenotaphrum secundatum) lines

St. Augustinegrass is well suited for lawns and commercial landscapes. While many genotypes are cross‐fertile, all cultivars are propagated vegetatively in sod production. To ensure varietal purity, development of sterile triploid hybrids by crossing tetraploid and diploid genotypes has been successfully used in other warm‐season turfgrasses. Applying this model in St. Augustinegrass would be beneficial to sod producers and turf managers who require purity for certification and uniformity for performance, respectively. This study was conducted to develop colchicine‐induced tetraploid lines of St. Augustinegrass. Seeds of cultivar ‘Raleigh’ were treated with four colchicine concentrations at four exposure times. A non‐treated control was included among the treatments. Seedlings that germinated were screened for genome size changes using flow cytometry. Line DSA 13005 and two progeny lines derived through selfing, DSA 16001 and DSA 16016, were corroborated as tetraploids (2n = 4x = 36) through chromosome counts. These lines will be used in future breeding efforts to attempt development of sterile triploid cultivars of St. Augustinegrass.     

Proteomic profiles during adventitious rooting of Eucalyptus species relevant to the cellulose industry

New Forests - Adventitious rooting (AR) is an obligatory step for vegetative propagation of commercial woody species. Paper industries have interest in Eucalyptus globulus Labill and its hybrids...     

不同氮肥水平下蚯蚓粪施用对水稻生长特性及产量的影响

以两优培九为材料,采用大田微区试验,研究不同氮肥水平(N1,9 g/m~2;N2,12 g/m~2;N3,15 g/m~2)下不同蚯蚓粪施用量(EC0,0;EC_1,16.88 kg/m~2;EC_2,33.76 kg/m~2)对水稻生长及产量形成的影响。结果表明,移栽40 d后EC_2和EC_1处理的茎蘖数均显著高于EC0(P0.05);幼穗分化期和乳熟期EC0处理的SPAD值均显著低于EC_1和EC_2处理(P0.05);齐穗期EC0处理的叶面积指数分别比EC_1和EC_2处理低32.7%和80.7%,地上部总干物质量分别比EC_1和EC_2处理低30.6%和59.8%;成熟期有效穗数、地上部干物质量和水稻产量均表现为EC_2EC_1EC0,EC_2和EC_1处理的有效穗数分别比EC0处理多41.5%和21.3%、地上部干物质量分别比EC0处理高47.7%和25.8%、产量分别比EC0处理高35.4%和34.3%。由此可见,施用蚯蚓粪便可促进水稻分蘖,提高水稻叶面积、SPAD值和地上部干物质量,进而提高水稻籽粒产量。     

Effects of Feeding Frequency on Apparent Energy and Nutrient Digestibility/Availability of Channel Catfish,Ictalurus punctatus,Reared at Optimal and Suboptimal Temperatures

This study examined the effects of feeding frequency (daily versus every other day [EOD]) on nutrient digestibility/availability of channel catfish, Ictalurus punctatus, reared at optimal (30 C) and suboptimal (24 C) temperatures. A 28% protein practical diet was used as the test diet, and chromic oxide was used at 0.75% of the diet as a maker. Twenty channel catfish of a mean weight of 141 g/fish were stocked into 12 flow‐through aquaria (110 L). Fish were fed daily or EOD to apparent satiation for 7 d before fecal samples were collected by the dissection method. Fish fed EOD to apparent satiation consumed more diet on days fed than those fed daily, and fish reared at 30 C consumed more diet than those reared at 24 C. Neither feeding frequency nor water temperature significantly affected apparent digestibility coefficients for energy and protein and apparent availability coefficients for total amino acids. Results show no advantage by feeding EOD over feeding daily on nutrient digestibility and diet utilization efficiency.     

Evaluation of mechanical properties of jute/glass/carbon fibers reinforced hybrid composites

A study on the tensile and flexural properties of jute-glass-carbon fibers reinforced epoxy hybrid composites in inter-ply configuration is presented in this paper. Test specimens were manufactured by hand lay-up process and their tensile and flexural properties were obtained. The effects of the hybridization, different fibers content and plies stacking sequence on the mechanical properties of the tested hybrid composites were investigated. Two-parameter Weibull distribution function was used to statistically analyze the experimental results. The failure probability graphs for the tested composites were drawn. These graphs are important tools for helping the designers to understand and choose the suitable material for the required design and development. Results showed that the hybridization process can potentially improve the tensile and flexural properties of jute reinforced composite. The flexural strength decreases when partial laminas from a carbon/epoxy laminate are replaced by glass/epoxy or jute/epoxy laminas. Also, it is realized that incorporating high strength fibers to the outer layers of the composite leads to higher flexural resistance, whilst the order of the layers doesn’t affect the tensile properties.