A herd management survey on culling guidelines and actual culling practices in three herd groups based on reproductive productivity in Japanese commercial swine herds

The objective of the present study was to investigate culling guidelines for gilts and sows in Japanese commercial herds and to compare differences between culling guidelines and actual culling practices in different herd productivity groups. A questionnaire survey was undertaken to obtain information on culling guidelines in 115 commercial swine herds that participated in the PigCHAMP data-share program. The questionnaire included questions on guideline values for culling intervals and the number of conception failure occurrences that would trigger a culling decision to be made. Ninety-two of the 115 herds (80.0%) returned appropriate data for the study and were included in the present study. In addition to questionnaire data, culling data regarding the actual culling intervals and number of reservices for gilts and sows culled during 2007 to 2008 were also obtained for the same herds from a PigCHAMP database. Culled gilts and sows were divided into 4 female groups on the basis of the stages of their reproductive life when they were culled: unmated gilts, mated gilts, unmated sows, and mated sows. Culling intervals in unmated gilts and sows were defined as the number of days from birth or weaning to culling, respectively, whereas in mated gilts and sows culling intervals were the number of days from last service to culling. Three herd productivity groups were formed on the basis of the upper and lower 25th percentiles of pigs weaned mated female(-1)·yr(-1):high-,intermediate- or low-performing herds. For unmated gilts and sows actual culling intervals were 15 d shorter than the guideline culling intervals in the surveyed data submitted by producers (P < 0.05). This shorter actual culling period for unmated gilts and sows did not vary significantly between herd productivity groups in any parity. However, for mated gilts and sows the actual culling intervals were at least 30 d longer than the guideline culling intervals (P < 0.05). Guideline and actual culling intervals for mated gilts and sows were at least 10 d shorter in high-performing herds than in low-performing herds (P < 0.05). High-performing herds had lower proportions of sows culled after the second reservice than intermediate- or low-performing herds in parity groups 0 to 5 (P < 0.05). In conclusion, culling guidelines for mated sows differed between herd productivity groups, and culling guidelines for mated gilts and sows were not strictly followed in any herd group in the commercial herds.     

Management factors associated with swine breeding-herd productivity in the United States

A database containing 24 key production measurements was created by abstracting data files of 673 U.S. farms which participated in the PigCHAMP data-share program in 1995. Summary statistics for breeding-herd performance data were presented for the Cornbelt and the South or Eastern regions. Eight models were built to assess the association between production system, operation management factors and productivity outcomes. Lactation length, percentage of multiple matings, parity of culled sows, percent gilts in the breeding-female inventory, and female culling rate were the management factors identified as having important associations with productivity outcomes. For example, shorter lactation length, higher percentage of multiple matings, and lower culling rate were associated with more pigs weaned per mated female per year. In addition, a lower percentage of gilts in the breeding-female inventory and a higher percentage of multiple matings were associated with fewer average non-productive female days. We recommend that producers change their management systems to decrease lactation length, the percentage of gilts in the breeding-female inventory, and female culling rate, and increase percentage of multiple matings in order to improve breeding-herd productivity on swine farms.     

Interactions between the associations of parity, lactation length, and weaning-to-conception interval with subsequent litter size in swine herds using early weaning

Sixteen farms having an average lactation length between 14.9 and 18.9 days were selected based upon producers' willingness to keep records of production and lactation feed intake. Data contained 9162 subsequent litter-size records abstracted from computerized production information-system files and lactation feed-intake records. Two-way interactions between the associations of parity and lactation length, and parity and weaning-to-conception interval with subsequent litter size were found in the same statistical model. Subsequent litter size did not increase in parities 1 and 2 as lactation length increased – but subsequent litter size in sows of parities 3–6 increased. In only parity 1, sows with weaning-to-conception interval 6–12 days produced 0.5 fewer pigs at subsequent farrowing than those with weaning-to-conception interval 1–5 days. However, in multiparous sows, no difference in subsequent litter size was found between weaning-to-conception intervals 1–5 and 6–12 days.     

Swine herds achieve high performance by culling low lifetime efficiency sows in early parity

Sow lifetime performance and by-parity performance were analyzed using a 3 by 3 factorial design, comprising 3 herd productivity groups and 3 sow efficiency groups. Data was obtained from 101 Japanese herds, totaling 173,526 parity records of 34,929 sows, for the years 2001 to 2006. Sows were categorized into 3 groups based on the lower and upper 25th percentiles of the annualized lifetime pigs born alive: low lifetime efficiency sows (LE sows), intermediate lifetime efficiency sows or high lifetime efficiency sows. Herds were grouped on the basis of the upper and lower 25th percentiles of pigs weaned per mated female per year, averaged over 6 years: high-, intermediate- or low-performing herds. Mixed-effects models were used for comparisons. LE sows in high-performing herds had 57.8 fewer lifetime nonproductive days and 0.5 earlier parity at removal than those in low-performing herds (P<0.05). The number of pigs born alive of LE sows continuously decreased from parity 1 to 5, whereas those of high lifetime efficiency sows gradually increased from parity 1 to 4 before decreasing up to parity ≥ 6 (P<0.05). In conclusion, the LE sows have a performance pattern of decreasing number of pigs born alive across parity. The present study also indicates that high-performing herds culled potential LE sows earlier than the other herds.     

Associations between age of gilts at first mating and lifetime performance or culling risk in commercial herds

Age of gilts at first mating (AFM) is a factor associated with reproductive performance of female pigs. The objectives of the present study were to compare AFM and reproductive performance across parity between three herd groups based on a productivity measurement and to determine lifetime performance by AFM and the herd groups. The female data included 38,212 mated gilts entered between 2001 and 2003, and the herd data included mean measurements from 2001 to 2006 in 101 herds. The average female inventory of the 101 herds was 370.2 females. Females were categorized into five groups: AFM 188-208, 209-229, 230-250, 251-271 or 272-365 days. Three herd groups were formed on the basis of the upper and lower 25th percentiles of pigs weaned per mated female over six years: high-, intermediate- and low-performing herds. Multilevel mixed-effects models were performed to analyze comparisons. The AFMs (± SEM) in the high-, intermediate- and low-performing herds were 239.5 ± 0.22, 247.4 ± 0.21 and 256.7 ± 0.35 days, respectively. As the AFM increased from 209-229 to 272-365 days, annualized lifetime pigs born alive (PBA) decreased from 18.2 to 15.3 pigs, and the number of parities at removal decreased from 4.8 to 4.1 (P<0.05). In parity 1, females with an AFM of 209-229 days had fewer PBA, but had a lower culling risk and shorter weaning-to-first mating interval than those with an AFM of 251-271 days (P<0.05). In conclusion, we recommend management practices such as boar exposure to hasten puberty in gilts and decrease AFM.     

Cooling set and its recovery in water-saturated bamboo under large bending deformation

To clarify the bending properties and cooling set for bamboo under large deformation, the relationship between applied deflection and residual deflection was investigated, and comparison was made with the results of thermal recovery and anatomical changes due to deformation. No clear effect of initial deflection on set measured after a long time was found for wood and bamboo loaded on the epidermis side (Bepi). On the other hand, set for bamboo loaded on the endodermis side (Bendo) increased with deformation level. Recovery from the deformation with time for Bendo was almost complete at around 1000 min after unloading in the three-point bending method. This recovery behavior was not seen for Bepi or wood. It was considered that no failure was caused in the bent specimen, because most of the deformation was completely recovered by reheating to the temperature at which the specimens were deformed before cooling. The recovery from deformation for B_endo loaded by the four-point bending method continued even after 1000 min. From microscopic observations, shearing deformations were seen for Bendo loaded by the three-point bending method. From these results, it can be considered that shearing deformations between the two loaded points effectively contribute to decreased recovery force from deformations for B_endo. Part of this report was presented at the 54th Annual Meeting of the Japan Wood Research Society in Sapporo, August 2004     

Influence of heating and drying history on micropores in dry wood

To investigate the influence of heating and drying history on the microstructure of dry wood, in addition to the dynamic viscoelastic properties, CO₂ adsorption onto dry wood at ice.water temperature (273 K) was measured, and the micropore size distribution was obtained using the Horvath-Kawazoe (HK) method. Micropores smaller than 0.6 nm exist in the microstructures of dry wood, and they decreased with elevating out-gassing temperature and increased again after rewetting and drying. Dry wood subjected to higher temperatures showed larger dynamic elastic modulus (E′) and smaller loss modulus (E″). This is interpreted as the result of the modification at higher temperature of the instability caused by drying. Drying history influenced the number of micropores smaller than 0.6 nm in dry wood not subjected to high temperature, although the difference in the number of micropores resulting from the drying history decreased with increasing out-gassing temperature. A larger number of micropores smaller than 0.6 nm exist in the microstructure of dry wood in more unstable states, corresponding to smaller E′ and larger E″ than in the stable state. Consequently, unstable states are considered to result from the existence of temporary micropores in the microstructures of dry wood, probably in lignin. Part of this report was presented at the 55th Annual Meeting of the Japan Wood Research Society, Kyoto, March 2005, and at the 56th Annual Meeting of the Japan Wood Research Society, Akita, August 2006     

Changes in micropores in dry wood with elapsed time in the environment

To investigate the changes in microstructures of wood with elapsed time in the environment, CO₂ adsorption onto dry wood was measured at ice-water temperature (273 K) for samples aged from 0.1 years to over 1000 years. The micropore size distribution was obtained using the Horvath-Kawazoe method. Micropores smaller than 0.6 nm in wood decreased in number with elapsed time in the environment, and a negative correlation was found between cumulative pore volume for pores smaller than 0.6 nm and elapsed time in the environment. Cumulative pore volume in the 1000-year sample was almost half of that in the 0.1- year sample. Micropores smaller than 0.6 nm in wood with a few decades or more of elapsed time increased in number after rewetting and drying. Consequently, microstructures of wood with longer time elapsed in the environment were considered to be more stable, because of longer-term thermal motion and possibly more repeated moisture adsorption and desorption and/or temperature variation in the environment.     

Influence of histories on dynamic viscoelastic properties and dimensions of water-swollen wood

The influences of heating history, cooling method, and cooling set on microstructures and the mechanical properties of water-swollen wood were studied by measuring viscoelastic properties and dimensional changes while elevating temperatures between 20°C and 90°C. Both the viscoelastic properties and dimensional changes of waterswollen wood in the first heating process were quite different from those in the other heating processes. The results revealed that the molecular state of green wood around room temperature was stabilized and could not return to this state if drying or heating was carried out. Cooling methods greatly affected the viscoelastic properties, while they hardly affected dimensional changes when the temperature was elevated. Localized stress in the microstructures of water-swollen wood produced by quenching affected the mechanical properties in the heating process, while external stress less than the proportional limit caused by a cooling set had no effect. This revealed that much greater localized stress linked to the instability of waterswollen wood than the external stress in relation to the cooling set occurred. Part of this report was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, March 2003