The physical and chemical properties of the herbicide cinmethylin (SD 95481)

Cinmethylin (SD 95481), is a novel herbicide developed for the selective pre-emergence control of many annual grass weeds in a wide range of temperate and tropical crops. Representing new herbicide chemistry, cinmethylin is in the cineole family. Cinmethylin is a mobile colourless liquid with a boiling point of 313°C under an inert atmosphere at atmospheric pressure. It has a density of 1015 kg m^?3 and a viscosity of 70–90 mPa s, both at 20°C. It is miscible in all proportions with most organic solvents but has a low solubility, 63 mg litre^?1, in water. It has a vapour pressure of 10.2 mPa (20°C) and the vapour pressure/temperature relationship is given by log_e P(Pa)=28.9–9816/T (K). The n-octanol/water partition coefficient is 6850 and soil organic matter/water sorption coefficient (K_om) ranges between 165 and 235 over the three types of soil used in these studies. Cinmethylin is stable in water over the pH range 3–11. Solutions of cinmethylin in water or solvents are reasonably stable to sunlight, though thin films on a quartz surface photooxidise mainly to an ester within 24 h. This rate can be reduced by the addition of photostabilisers or by sorption onto soil surfaces. In an inert atmosphere cinmethylin is stable to high temperatures, though, in air, oxidation occurs at temperatures above 100°C to give the same product as by photodecay.     

Biochemical markers of bone metabolism in growing thoroughbreds: a longitudinal study

This study describes longitudinal changes in serum levels of biochemical markers of bone cell activity in a group of 24 thoroughbred foals from birth to 18 months of age. The markers of bone formation included the type I collagen carboxy-terminal propeptide (PICP), the bone-specific isoenzyme of alkaline phosphatase (BAP), and osteocalcin (OC). Levels of the cross-linked telopeptide of type I collagen (ICTP), a marker of bone resorption, and the N-terminal propeptide of type III collagen (PNIIIP), a marker of soft tissue turnover, were also measured. Levels of all markers fell significantly between birth and 18 months of age (70-80 per cent); this decrease being most marked between 0 and 6 months. However, a transient increase in levels of the markers then occurred between 6 and 14 months of age. The timing of this increase was specific for each parameter. ICTP and OC concentrations increased between October and December. PICP concentrations increased between December and April whereas the increase in PIIINP was coincident with the peak in weight gain between April and June. Changes in BAP concentration were less distinct at this time. Season was shown to have significant effects on the biochemical markers independent from the effect of age. Concentrations of all markers decreased with increasing body weight and at any given age heavier horses had lower marker levels. These results show that biochemical markers of bone cell activity and soft tissue turnover follow characteristic patterns of change in growing thoroughbreds influenced by age, season and bodyweight. The demonstration that the reference ranges for the biochemical markers change from month to month means that single samples from individuals are of little value for monitoring bone cell activity in growing thoroughbreds.     

Pyrethroid insecticide residues on vegetable crops

Pyrethroid insecticides were applied on various vegetable crops as foliar treatments to determine dissipation rates. On Chinese broccoli (Guy Lon), Chinese mustard (Pak Choi) and Chinese cabbage (Kasumi, napa), fenvalerate was persistent with residues of 0.10, 0.14 and 0.11 mg kg-1, respectively, by day 21. Cypermethrin residues on head lettuce were below 0.1 mg kg-1 by day 10 but on the leafier romaine and endive varieties it was more persistent and required 14-19 days to dissipate below this concentration. After three applications, residues of cypermethrin in harvested carrots and of permethrin in eggplant were not detected on the day of application. On asparagus, deltamethrin and cypermethrin residues declined to less than 0.1 mg kg-1 by days 1 and 2, respectively; permethrin was more persistent, requiring more than 2 days to decline to less than 0.1 mg kg-1. Deltamethrin on dry (cooking) and Spanish onions was not detected on the day of application. On tomatoes, the concentration of permethrin was 0.093 mg kg-1 on the day of application and declined to about 0.05 mg kg-1 after 2-4 days. In general, permethrin, cypermethrin and deltamethrin residues declined to acceptable concentrations within an acceptable pre-harvest interval. Fenvalerate may be too persistent on these speciality crops unless a maximum residue limit > 0.1 mg kg-1 is permitted.     

Effect of the Type and Number of Prostaglandin Treatments on Corpus Luteum, the Largest Follicle and Progesterone Concentration in Dairy Cows

Lactating dairy cows (n = 72) with a mature corpus luteum (CL) (diameter of > or = 17 mm) determined by ultrasonography and having a follicle with a diameter of > or = 10 mm were randomly assigned to four groups. Cows were treated with cloprostenol i.m. once or twice, or with dinoprost i.m. once or twice with an 8-h interval. The ovaries of each cow were scanned daily by transrectal ultrasonography to measure the changes in the areas of CL and the largest follicle and to determine the occurrence of ovulation. Oestrus was verified twice daily. In addition, blood sample was withdrawn from each cow daily for measuring progesterone (P4) concentrations. Significant decreases in the percentage changes relative to areas of CL and P4 concentrations or increases in the percentage changes in the area of the largest follicle on day 0 were detected in each group during the experiment. However, the type of the drug and the number of the treatments had no significant effect on those parameters. Cows ovulated with or without showing oestrus (group A) and cows exhibiting no oestrus and ovulation (group B) were also evaluated. In contrast to the mean area of the CL and the mean concentration of P4 on day 0, the mean area of the largest follicles between the two groups on day 0 differed significantly. Significant decreases in the percentage changes relative to the area of the CL and P4 concentration or increases in the percentage changes relative to the area of the largest follicle during the experiment were detected in both groups; however, there were no group differences. Treatment of dairy cows with two injections of prostaglandins (cloprostenol or dinoprost) at an 8-h interval resulted in more cows being observed in oestrus within 5 days after treatment and having significantly higher pregnancy rate than those treated with a single prostaglandin injection.     

EFFECTS OF ACEPROMAZINE ON THREE-PHASE 99mTc-MDP BONE IMAGING IN 11 HORSES

Horses undergoing skeletal scintigraphy can have decreased radiopharmaceutical bone uptake in the limbs. This reduces the diagnostic value of the scan. The aim of the present study was to measure the changes in count density caused by vasodilatation and increased blood flow associated with intravenous injection of acepromazine during bone scintigraphy in normal horses. A three-phase bone scan was performed twice in 11 adult horses to study the effects of acepromazine on the count density of the resultant scintigrams. With acepromazine, there was a statistically significant mean difference of 12 s for initial blood flow and 21 s for peak flow. The time to initial blood flow and time to peak flow occurred earlier for the scans in which acepromazine was used. There were no significant differences in the bone to soft tissue ratios during the soft tissue and bone phases of the scan between procedures. Intravenous administration of acepromazine increases peripheral blood flow causing an earlier onset of the vascular phase during the three-phase bone scan. Acepromazine did not increase the count density of the bone phase scintigrams. As expected, the vasodilatation and increased blood flow associated with intravenous injection of acepromazine affected the count density of the vascular phase of the bone scan.     

Evaluation of uncalibrated preferential flow models against data for isoproturon movement to drains through a heavy clay soil

The uncalibrated predictive ability of four preferential flow models (CRACK‐NP, MACRO/MACRO_DB, PLM, SWAT) has been evaluated against point rates of drainflow and associated concentrations of isoproturon from a highly structured and heterogeneous clay soil in the south of England. Data were available for four plots for a number of storm events in each of three successive growing seasons. The mechanistic models CRACK‐NP and MACRO generally gave reasonable estimates of drainflow over the three seasons, but under‐estimated concentrations of isoproturon over a prolonged period in the first season and over‐estimated them in the two remaining seasons. CRACK‐NP simulated maximum concentrations of isoproturon over the first two events of each of the three seasons of 156, 527 and 24.4 µg litre^?1, respectively, and matched the observed data (465, 65.1 and 0.65 µg litre^?1) slightly better than MACRO (69.1, 566 and 58.5 µg litre^?1). Automatic selection of parameters from soils information within MACRO_DB reduced the emphasis on preferential flow relative to the stand‐alone version of MACRO. This gave a poor simulation of isoproturon breakthrough and simulated maximum concentrations were 0, 50.1 and 35.1 µg litre^?1, respectively. The capacity model PLM gave the best overall simulation of total drainflow for the first two events in each season, but over‐estimated concentrations of isoproturon (967, 808 and 51.3 µg litre^?1). The simple model SWAT represented total drainflow reasonably well and gave the best simulation of maximum isoproturon concentrations (140, 80.2 and 8.2 µg litre^?1). There was no clear advantage here in using the mechanistic models rather than the simpler models. None of the models tested was able to simulate consistently the data set, and uncalibrated modelling cannot be recommended for such artificially drained heavy clay soils. © 2001 Society of Chemical Industry     

Poind Soil pH Measurement

Soil pH often is measured in samples from the bottoms of aquaculture ponds. Several different techniques for soil pH are used. This study considered the differences in pH obtained by the different methods and determined which methods appeared most useful. Dual electrodes (indicating and reference) and a single‐probe combination electrode gave similar pH values when inserted into 1:1 mixtures of dry soil and distilled water. There were slight differences in pH between readings with dual and combination electrodes when the dual electrodes were arranged with the indicating electrode in the sediment phase and the reference electrode in the supernatant phase of the mixture. The two‐phase method with the dual electrode does not appear warranted because of greater difficulty in making measurements. Dry soil: distilled water ratios of 1:2.5, 1:5, and 1:10 had progressively greater pH readings than obtained at a 1:1 ratio. Measurements made in 0.01 M CaCl₂ and 1.0 M KCl had much different values than those made in distilled water. Higher pH resulted when pH was measured without stirring or in filtrates of soil‐water mixtures. A 20‐min period of intermittent stirring before making measurements was necessary for a stable pH value. Particle size did not influence pH in aliquots passing 0.053 to 2.36‐mm sieves. Drying temperature had a strong influence on pH, and measurements made on samples dried at 40 to 60 C are probably most reliable. Measurements of in situ pH in wet soil with standard pH electrode or a portable acidity tester differed greatly from those made in 1:1 dry soil to distilled water mixtures. Pond bottom soil pH measurement should be standardized. Based on findings of this study, the following method is suggested: dry soil at 60 C in a forced‐draft oven; pulverize soil to pass a 2‐mm sieve; mix soil and distilled water in a 1:1 ratio (weight: volume); stir intermittently with glass rod for 30 min; insert dual electrodes or a combination electrode into the mixture; measure pH while stirring.     

Effect of sodium bicarbonate and sodium bentonite on digestion, solid and liquid flow, and ruminal fermentation characteristics of forage sorghum silage-based diets fed to steers

Six ruminally cannulated steers, five Holsteins and one Hereford (250 to 295 kg), were fed 84% forage sorghum silage plus 16% supplement or 50% forage sorghum silage plus concentrate and supplement diets containing either no addition (controls), 1% sodium bicarbonate (NaHCO3) or 2% sodium bentonite in a 2 X 3 factorial arrangement of treatments in a 6 X 6 Latin-square experiment with 3-wk periods. Sodium bicarbonate increased dry matter (DM) intake when concentrate was included, but neither compound affected intake of the 84% silage diet. Bentonite lowered DM, neutral detergent fiber (NDF), and acid detergent fiber (ADF) digestibilities, but NDF disappearance from nylon bags was unchanged. Ruminal pH, osmolality and L(+) and D(-) lactate were not affected by treatment. Both NaHCO3 and bentonite tended to lower ruminal NH3-N concentrations. Bentonite lowered the molar proportion of isobutyrate in ruminal fluid relative to controls, but proportions of other volatile fatty acids (VFA) and total VFA concentrations were unchanged. Neither NaHCO3 nor bentonite affected ruminal liquid or solid volumes, dilution rate constants or ruminal outflow rates. Markers overestimated volumes, but correction with measured volumes did not change interpretation of treatment effects. It was concluded that control diets had sufficiently high baseline values of pH, dilution rate and acetate proportion to preclude changes induced by either compound, especially at 1 or 2% of DM intake. An effect on palatibility through neutralization of silage acids may have been responsible for the intake response to NaHCO3.     

Effects of chilling on the formation of secondary growing-centres in flowers of the glasshouse carnation

The incidence of secondary growing-centres within the flowers of carnation was increased when plants were chilled at 5°C for 1–3 weeks during flower development. Application of GA₃ to shoots in the early stages of flower formation also caused an increase in the number of secondary growing-centres formed. Shoot tips excised from plants that had been chilled yielded greater amounts of diffusible gibberellin-like substances than shoot tips excised from plants that had been grown at normal glasshouse temperatures. It is suggested that endogenous gibberellins have a role in controlling the formation of secondary growing-centres within the flower.