Preparation of poly(vinyl alcohol)/ZrO2 composite nanofibers via co-axial electrospinning with higher ZrO2 particle content

Poly(vinyl alcohol) (PVA)/zirconium oxide (ZrO₂) composite nanofibers with a skin-core structure were prepared and the effect of ZrO₂ particle content on uniform web formation was investigated. The optimized polymer concentration, tip to collector distance, and applied voltage for electrospinning were 11 wt%, 12 cm, and 20 kV, respectively. Skin-core PVA/ZrO₂ composite nanofibers containing up to 12 wt% ZrO₂ were successfully prepared, but it was difficult to obtain PVA/ZrO₂ composite nanofiber webs via conventional electrospinning. Increasing the amount of ZrO₂ caused the morphology of the PVA/ZrO₂ composite nanofibers to become a non-uniform nanoweb with irregular nanofiber diameters. While it was difficult to obtain a uniform nanofiber web containing a content of ZrO₂ over 6 wt% for conventional electrospinning, a more uniform nanofiber web could be obtained at up to 9 wt% ZrO₂ using a skin-core dual nozzle. More uniform webs could also be obtained when ZrO₂ was in the skin rather than the core.     

Expression of myeloperoxidase in swine influenza virus (SIV)-infected neutrophils in lungs from pigs experimentally infected with SIV subtype H1N2

The expression of myeloperoxidase (MPO) was examined in the swine influenza virus (SIV)-infected neutrophils in the lungs of pigs experimentally infected with swine influenza virus (SIV) subtype H1N2 by immunohistochemistry. Five pigs each from the infected and non-infected group were euthanized 1, 3, 5, 7, and 10?days post-inoculation (dpi). Immunohistochemical reactivity was mainly seen in neutrophils. The score for pulmonary histopathological lesions correlated with the score for MPO immunohistochemical reactivity (r ( s )?=?0.962, P?相似文献   

Relation between stockperson behavior toward cows in a holding area and milk yields

To assess the effects of negative and positive behaviors on milk yields, this study examined the attitudes and behaviors of stockpersons toward their cows and milk yields at a farm where 15 workers milked 67 cows as rotating shift work. At a holding area when moving cows to the parlor, stockperson behaviors were observed at 34 milkings. Behaviors were classified as negative (NEG) or positive (POS): NEG were attempts to move cows using touching (NT), vocalization (NV), and gestures (NG); POS were communications without attempting to move cows, consisting of touch (PT) or vocalization (PV). Numbers of NV and NEG were negatively correlated with milk yields of first parity (p < .05). Average milk yields of first parity and all cows were higher when PT were observed (p < .001, p < .0001) and POS were observed (p < .001 and p < .0001). Numbers of PT were positively correlated with milk yields of first parity (p < .05). Average milk yields of second parity were higher when PV was observed (p < .01). Positive behaviors, especially touching, are related to higher herd milk yields. Negative behaviors such as negative vocalizations are related to lower yields of younger cows.     

Estimating the onset of cambial activity in Scots pine in northern Finland by means of the heat-sum approach

We estimated the date of onset (Date(est)) of cambial activity by the pinning method in Scots pine (Pinus sylvestris L.) trees at Vanttauskoski (Site 1) and Laanila (Site 2) near the latitudinal limit of Scots pine in northern Finland. In each year and at each site, observations were made on a different set of five trees. The estimated dates of onset of cambial activity were compared with the corresponding heat sums, calculated in degree-days according to two models. Within years, Date(est) varied among trees by up to 15 days at Site 1 and up to 13 days at Site 2. Among years, mean Date(est) varied by 15.3 days at Site 1 and 12.0 days at Site 2. The overall mean Date(est) differed between sites by 6 days (June 5 at Site 1 and June 11 at Site 2). Among all trees in all years, the mean number of degree days (d.d.) calculated from mean daily temperature above a threshold of 5 degrees C before Date(est) ranged from 68.7 to 135 d.d. at Site 1 and from 37.4 to 154.7 d.d. at Site 2. Among years, the mean heat sum before Date(est )ranged from 94 to 112.5 d.d. at Site 1 and from 61.4 to 136 d.d. at Site 2. Variation among years in heat sum before Date(est) at Site 2 was highly significant, indicating that one or more factors other than, or in addition to, heat sum determines the onset of cambial activity in Scots pine. Similar results were obtained when heat sum was computed from the area between the sine wave generated by daily maximum and minimum temperature and the threshold temperature.     

Dry-jet wet spinning of polyhydroxyamide fibers

A high molecular weight polyhydroxyamide (PHA) solution in N, N-dimethyl acetamide (DMAc) was prepared from 3,3′-dihydroxybenzidine and isophthalic chloride (IPC), which was used for spinning PHA fiber. Before spinning, the diffusion property of DMAc into various coagulants was examined. The fiber was well formed in coagulants such as water/ethanol with a composition of 5/5, ethanol, and ethanol/isopropanol with a composition of 7/3 and 5/5. However, the PHA fiber spun in the water/ethanol mixture contained voids. After the fiber spun in ethanol was annealed at over 350°C, the ultimate stress and initial modulus of the fiber increased from 75.5 MPa and 3.22 GPa to 369 MPa and 29.5 GPa, respectively. These properties of the PHA fiber spun by the dry spinning method were also enhanced, attaining 154 MPa and 5.56 Gpa, respectively.     

Flow analysis of profile extrusion by a modified cross-sectional numerical method

Flow analysis of profile extrusion is essential for design and production of a profile extrusion die. Velocity, pressure, and temperature distribution in an extrusion die are predicted and compared with the experimental results. A two dimensional numerical method is proposed for three dimensional analysis of the flow field within the profile extrusion die by applying a modified cross-sectional numerical method. Since the cross-sectional shape of the die is varied gradually, it is assumed that the pressure is constant within a cross-sectional plane that is perpendicular to the flow direction. With this assumption, the velocity component in the cross-sectional direction is neglected. The exact cross-sectional shape at any position is calculated based on the geometry of standard cross-sections. The momentum and energy equations are solved with proper boundary conditions at a cross-section and then the same calculation is carried out for the next cross-section using the current calculated values. An L-shaped profile extrusion die is produced and employed for experimental investigation using a commercially available polypropylene. Numerical prediction for the varying cross-sectional shape provides better results than the previous studies and is in good agreement with the experimental results.