Antibacterial Bombyx Mori silk fabric modified with reactive chitosan quaternary ammonium salt and its laundering durability

A new fiber-reactive chitosan derivative was synthesized in two steps from a chitosan of low molecular weight. First, a water-soluble chitosan derivative, N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride (short for HTCC), was prepared by reacting chitosan with 2,3-epoxypropyltrimethylammonium chloride. Second, HTCC was further modified by reacting with N-(hydroxymethyl)-acrylamide to prepare a fiber-reactive chitosan derivative, O-methyl acrylamide quaternary ammonium salt of chitosan (short for NMA-HTCC), which can form covalent bonds with silk fiber under alkaline conditions. The chemical structure of NMA-HTCC was characterized by Fourier transform infrared spectrum (FTIR) and nuclear magnetic resonance (NMR). The substitution degree of HTCC and the double-bond content of NMA-HTCC were tested. Then NMA-HTCC was used for antibacterial finishing of Bombyx Mori silk fabric. The results showed that silk fabric treated with NMA-HTCC had a significantly improved antibacterial activity to Staphylococcus aureus and Escherichia coli, and the antibacterial activity of silk fabric finished by NMA-HTCC was much better than that finished by chitosan and HTCC. Bombyx Mori silk fabric modified with NMA-HTCC demonstrated excellent durable antibacterial activity, even after 50 repeated launderings, the bacterial reduction rate of silk fabric maintained over 95 %.     

Properties of polymers as a nanoscale material for fibers in leather

Hyperbranched polymers, an innovative class of nano-polymers, could enhance the properties of fibers owning to their unique structures. In this study, the ester compound (HPAE) of 3-(bis(2-hydroxyethyl)amino)propionic acid and pentaerythritol was treated with undecylenic acid to obtain novel hyperbranched multiterminal alkenyl polymers (HPAE-UAs). The sizes of the HPAE-UAs could be controlled conveniently from 400 to 1300 nm by adjusting the capped fraction of the hydroxyl groups with undecylenic acids. The molecular structures of HPAE-UAs were characterized by means of FT-IR and ¹H-NMR. Then, the effect of the HPAE-UAs on the structures, thermal, and mechanical properties of the wet blue leather were investigated. TEM and SEM demonstrated that the spacing between fibers was enlarged. The thermogravimetric analysis showed that the residual volume of leather could reach up to 30.3 % at about 500 °C. Furthermore, the shrinkage temperature increased to 89.4 °C. It was found that the HPAE-UAs used in leather could improve the thermal performance, physical and mechanical properties. All of these results indicate that HPAE-UAs can be used as a fatliquor with retanning in leather process.     

Analysing taxonomic structures and local ecological processes in temperate forests in North Eastern China

Background

One of the core issues of forest community ecology is the exploration of how ecological processes affect community structure. The relative importance of different processes is still under debate. This study addresses four questions: (1) how is the taxonomic structure of a forest community affected by spatial scale? (2) does the taxonomic structure reveal effects of local processes such as environmental filtering, dispersal limitation or interspecific competition at a local scale? (3) does the effect of local processes on the taxonomic structure vary with the spatial scale? (4) does the analysis based on taxonomic structures provide similar insights when compared with the use of phylogenetic information? Based on the data collected in two large forest observational field studies, the taxonomic structures of the plant communities were analyzed at different sampling scales using taxonomic ratios (number of genera/number of species, number of families/number of species), and the relationship between the number of higher taxa and the number of species. Two random null models were used and the “standardized effect size” (SES) of taxonomic ratios was calculated, to assess possible differences between the observed and simulated taxonomic structures, which may be caused by specific ecological processes. We further applied a phylogeny-based method to compare results with those of the taxonomic approach.

Results

As expected, the taxonomic ratios decline with increasing grain size. The quantitative relationship between genera/families and species, described by a linearized power function, showed a good fit. With the exception of the family-species relationship in the Jiaohe study area, the exponents of the genus/family-species relationships did not show any scale dependent effects. The taxonomic ratios of the observed communities had significantly lower values than those of the simulated random community under the test of two null models at almost all scales. Null Model 2 which considered the spatial dispersion of species generated a taxonomic structure which proved to be more consistent with that in the observed community. As sampling sizes increased from 20 m × 20 m to 50 m × 50 m, the magnitudes of SESs of taxonomic ratios increased. Based on the phylogenetic analysis, we found that the Jiaohe plot was phylogenetically clustered at almost all scales. We detected significant phylogenetically overdispersion at the 20 m × 20 m and 30 m × 30 m scales in the Liangshui plot.

Conclusions

The results suggest that the effect of abiotic filtering is greater than the effects of interspecific competition in shaping the local community at almost all scales. Local processes influence the taxonomic structures, but their combined effects vary with the spatial scale. The taxonomic approach provides similar insights as the phylogenetic approach, especially when we applied a more conservative null model. Analysing taxonomic structure may be a useful tool for communities where well-resolved phylogenetic data are not available.

     

Enzymatic treatment on cotton fibers: degradation kinetics of pectin and influence of shape change on adsorption

Alkaline pectinase was one of the most effective enzymes to treat cotton as alternative agent to replace the conventional alkaline method. Removal of pectin and cutin was considered the explanation for improvement of wettability as well as water adsorption on cotton fiber. However, degradation kinetics of pectin is unclear, and the influence of fiber shape on property changes after enzymatic treatment was ignored. The main objective of this work was to reveal interactions between pectinase and cotton fiber for mechanism study. A heterogeneous catalysis kinetic equation, which is associated with Langmuir adsorption model and enzyme deactivation, was used to describe the heterogeneous catalysis. The enzymatic process conditions were optimized. Raw cotton fibers, pectinase-treated and alkali-treated fibers were characterized by impurities content determination, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscope (SEM). Mechanism of water adsorption enhancement on treated fibers was discussed. In addition to elimination of the outer impurities, flat fibers with less twist and shape changes of lumen were also obtained to ensure better accessibility and water adsorption after enzymatic treatment.     

Updating the elite rice variety Kongyu 131 by improving the <Emphasis Type="Italic">Gn1a</Emphasis> locus

Background

Kongyu 131 is an elite japonica rice variety of Heilongjiang Province, China. It has the characteristics of early maturity, superior quality, high yield, cold tolerance and wide adaptability. However, there is potential to improve the yield of Kongyu 131 because of the relatively few grains per panicle compared with other varieties. Hence, we rebuilt the genome of Kongyu 131 by replacing the GRAIN NUMBER1a (Gn1a) locus with a high-yielding allele from a big panicle indica rice variety, GKBR. High-resolution melting (HRM) analysis was used for single nucleotide polymorphism (SNP) genotyping.

Results

Quantitative trait locus (QTL) analysis of the BC₃F₂ population showed that the introgressed segment carrying the Gn1a allele of GKBR significantly increased the branch number and grain number per panicle. Using 5 SNP markers designed against the sequence within and around Gn1a, the introgressed chromosome segment was shortened to approximately 430 Kb to minimize the linkage drag by screening recombinants in the target region. Genomic components of the new Kongyu 131 were detected using 220 SNP markers evenly distributed across 12 chromosomes, suggesting that the recovery ratio of the recurrent parent genome (RRPG) was 99.89%. Compared with Kongyu 131, the yield per plant of the new Kongyu 131 increased by 8.3% and 11.9% at Changchun and Jiamusi, respectively.

Conclusions

To achieve the high yield potential of Kongyu 131, a minute chromosome fragment carrying the favorable Gn1a allele from the donor parent was introgressed into the genome of Kongyu 131, which resulted in a larger panicle and subsequent yield increase in the new Kongyu 131. These results indicate the feasibility of improving an undesirable trait of an elite variety by replacing only a small chromosome segment carrying a favorable allele.

     

Development and application of a molecular marker for TMV resistance based on <Emphasis Type="Italic">N</Emphasis> gene in tobacco (<Emphasis Type="Italic">Nicotiana tabacum</Emphasis>)

Tobacco mosaic virus (TMV) caused serious loss in yield and quality of tobacco every year. It is a long-term goal to improve the tobacco resistance against TMV by tobacco breeding. N gene was the firstly reported TMV-resistant gene, which showed resistance against all Tobamoviruses except the Ob stain and belonged to the toll-interleukin-1 receptor/nucleotide-binding site/leucine-rich repeat class of plant resistance (R) genes. At present, N gene had already been widely used in tobacco conventional breeding, but there is rare available molecular maker used in marker-assisted selection of TMV resistance. In this study, we designed a pair of primers that specific amplify N gene fragment based on the sequence of N gene intron III, named N-marker. Then, we identified TMV resistance by two selecting methods, PCR with N-marker and inoculated with the TMV-C strain. Results from the two method showed that (1) 13 varieties among 67 tobacco varieties displayed hypersensitive reaction when inoculated with the TMV-C strain, also contained N gene fragments screened by PCR with N-marker; (2) 105 strains of 200 BC1 strains showed resistance against TMV when inoculated with TMV-C strain, meanwhile, 103 of the 105 strains contained N gene fragment verified by PCR with N-marker. Therefore, the N-marker is reliable for high throughput screening of germplasm resources and tobacco breeding materials in selection of N-mediated TMV resistance. Our study not only developed a molecular marker for tobacco breeding, but also identified new germplasm resources that are resistant to TMV.     

Heterosis and combining ability of seven maize germplasm populations

Understanding the combining ability and heterosis of available germplasm is a prerequisite for successful maize improvement and breeding. The objectives of this study were to analyze the combining ability and heterosis of seven representative maize germplasm populations, and further, to evaluate their potential utility in germplasm improvement. A total of 21 crosses were made among these seven populations in a complete diallel without reciprocals. The parental populations and 21 crosses were evaluated for days to silking (DS), ear height (EH), and grain yield (GY) in the Northeast and Yellow and Huai River maize growing areas in China in 2012. Csyn5, Csyn7, Cpop.11, and Cpop.12 had desirable general combining ability (GCA) effects for DS and EH in both the Northeast China mega-environment (NCM) and the Yellow and Huai River Regions of China mega-environment (YHCM). Cpop.11 possessed a favorable GCA effect for GY in the NCM, as did Csyn5, Cpop.17, and Cpop.18 in the YHCM. Csyn6 and Csyn7 exhibited tremendous yield-enhancing potential in both mega-environments. Additionally, six combinations including Csyn7 × Csyn6, Csyn5 × Csyn6, Cpop.11 × Cpop.18, Cpop.12 × Cpop.17, Csyn7 × Cpop.17, and Csyn5 × Csyn7 exhibited better specific combining ability effects for GY, yield performance, and mid-parent heterosis in the appropriate mega-environment. These results indicated that the seven populations would be very useful for the improvement of related agronomic traits, and the six candidate combinations possessed great potential for further improvement and utilization.     

Soybean plant height QTL mapping and meta‐analysis for mining candidate genes

Plant height is closely related to seed yield of soybean. The goal of this study was to identify important loci affecting soybean plant height using meta‐analysis based on a reference physical map. Plant height related to QTLs was mapped across eight years with a RIL population by WinQTLCart v2.5. 182 QTLs related to plant height of soybean from database and our research were collected, and each QTL was projected onto the soybean physical map by software BioMercator v2.1. The confidence interval of meta‐QTL ranged from 0.09 to 5.07 Mb, and the mean phenotypic variance ranged from 4.9% to 73.0%. Furthermore, 4,259 candidate genes were located in these consensus QTLs, and 40 of them were involved in the plant growth and stem elongation and annotated as plant hormone signal transduction (pathway ID ko04075) in KEGG pathway. These results would lay a foundation for fine mapping of QTLs/genes related to plant height and marker‐assisted selection for breeding in soybean.     

Potassium fertilization improves apple fruit (Malus domestica Borkh. Cv. Fuji) development by regulating trehalose metabolism

Potassium (K) fertilization and antioxidant enzymes both positively influence plant growth and development. However, it is not known whether K treatment improves fruit development via increasing soluble sugar. In this study, K-treated apple (Malus domestica Borkh.) fruit was harvested from 60 to 150 days after full bloom and was analyzed for ROS production and trehalose metabolism. The results show that K fertilization improved fruit firmness, increased growth according to several parameters, increased soluble sugar content, and decreased ROS production. The ascorbate metabolic pathway more effectively reduced ROS production than catalase and peroxidase (POD) did under K treatment. Trehalose-treated fruit also showed higher activity of ascorbate-related enzymes (DHAR, GR, and APX) compared with non-treated fruit. The changes of antioxidant enzyme activity in trehalose-treated fruit corresponded to those in K-treated fruit. Moreover, trehalase (TREH) activity in fruit was notably reduced by K treatment. This demonstrates that K influences ROS production via regulating trehalose content and TREH activity in fruit. This study provides new insight into the K mechanism which improves fruit development, including fruit firmness and size.     

带裂缝混凝土氯离子扩散作用试验研究及数值模拟

为了准确评估带裂缝工作混凝土结构的耐久性能,针对氯离子在带裂缝混凝土中的扩散过程进行研究。提出了无损制备裂缝的方法,可高效易行地在混凝土侧面及内部产生裂缝。对带裂缝的水泥砂浆试件进行氯盐溶液浸泡试验,深入研究了单缝和双缝试件中氯离子的扩散作用,修正了氯离子的扩散系数,并对带裂缝混凝土的氯离子扩散过程进行了数值模拟。研究结果表明：氯离子会沿裂缝发展方向及垂直于裂缝发展方向扩散,随着水灰比的减小,砂浆试件的抗氯离子扩散性能明显提高,在一定范围内,当裂缝间距增大,双缝间的氯离子扩散交互影响作用明显减小,ANSYS软件的模拟结果与试验数据吻合良好。