Automatic detection of a damaged cutting tool during machining I: method to detect damaged bandsaw teeth during sawing

This paper presents an on-line method for detecting damaged teeth in the bandsaw using acoustic emission (AE) signal energy. The method is based on an analysis of differences in AE energies generated by normal and damaged teeth during sawing. Because of the difference in the amount of sawing, the AE energy was low for sawing by the damaged tooth and high for sawing by the normal tooth immediately after the damaged tooth. The ratio of AE energy for two successive teeth — a normal tooth immediately following a damaged tooth — was much greater than 1, whereas the ratio of AE energy for two successive normal teeth was close to 1. The results demonstrate that the technique using the AE energy ratio for two successive teeth is effective for on-line detection of damaged bandsaw teeth.Part of this paper was presented at the 9th Annual Meeting of the Chugoku Skikoku Branch of the Japan Wood Research Society, Tottori, October 1997     

Purification and characterization of two anionic trypsins from the hepatopancreas of carp

SUMMARY: Two trypsins, designated as trypsin A and trypsin B, have been purified from the hepatopancreas of carp. The purification procedures consisted of ammonium sulfate fractionation, and chromatographies on DEAE-Sephacel, Ultrogel AcA54 and Q-Sepharose. Trypsin A was purified to homogeneity with the molecular mass of approximately 28 kDa, while trypsin B gave two close bands of 28.5 kDa and 28 kDa on sodium dodecylsulfate polyacrylamide gel electrophoresis both under reducing and non-reducing conditions. On native-PAGE, both trypsin A and trypsin B showed a single band. Trypsin A and trypsin B revealed optimum temperature of 40°C and 45°C, respectively, and shared the same optimum pH 9.0 using Boc-Phe-Ser-Arg-MCA as substrate. Both enzymes were effectively inhibited by trypsin inhibitors and their susceptibilities were similar. The NH₂-terminal amino acid sequences of trypsin A and trypsin B were determined to 37th and 40th amino acid residue, respectively. Their sequences were very homologous, but not identical to that of a trypsin-type serine proteinase from carp muscle and these of other trypsins. Immunoblotting test using the antibody raised against trypsin A cross-reacted with trypsin B positively.     

Habitat modification by invasive crayfish can facilitate its growth through enhanced food accessibility

Background

Invasive ecosystem engineers can facilitate their invasions by modifying the physical environment to improve their own performance, but this positive feedback process has rarely been tested empirically except in sessile organisms. The invasive crayfish Procambarus clarkii is an ecosystem engineer that destroys aquatic macrophytes, which provide a physical refuge for animal prey, and this destruction is likely to enhance vulnerability to predators. Using two series of mesocosm experiments, we tested the hypothesis that the invasive crayfish increases its feeding efficiency on animal prey by reducing submerged macrophytes, thus increasing its individual growth rate in a positive density-dependent manner.

Results

In the first experiment, increasing crayfish density reduced both macrophytes and animal prey (dragonfly and chironomid larvae) and, importantly, increased the growth rate of individual crayfish, in accordance with our expectation. In the second experiment, we used artificial macrophytes to clarify whether the physical architecture of macrophytes itself protects animal prey and limits crayfish growth rate. Increasing the artificial macrophyte quantity not only increased the survival of animal prey, but also retarded the crayfish growth rate.

Conclusions

We conclude that macrophytes strengthen bottom-up control of crayfish, but this effect can be relaxed by increasing the density of crayfish via reduction in macrophytes. This positive feedback process may explain the crayfish outbreaks and regime shifts occasionally observed in invaded freshwater ecosystems.

     

Regression tree analysis of the relationship between the concentrations of antimicrobial components and the microbiota of normal milk from dairy cows

The purpose of this study was to determine the concentrations of antimicrobial components (immunoglobulin A (IgA), lactoferrin (LF), lingual antimicrobial peptide (LAP), and S100A7) in normal milk and their relation to host factors (Age, somatic cell count (SCC), days in milk, richness, and alpha diversity of the milk microbiota) in dairy cows using multivariate regression tree analyses, and to clarify how the milk microbiota is related to the obtained results. Thirty normal milk samples were collected from a commercial dairy farm in June 2020. The thresholds that predicted the concentration of each antimicrobial component in milk were obtained by regression tree analysis, and the beta-diversity of the milk microbiota composition between groups divided according to each threshold was compared by an analysis of similarities test. The IgA and LF concentrations were mainly predicted by the SCC (177,500 and 70,000 cells/ml, respectively), and the LAP and S100A7 concentrations were predicted by Age (29.667 and 40.3 months, respectively). No relationship was observed between the concentration of IgA, LAP, or S100A7 and the milk microbiota composition between the groups divided by the threshold for prediction, but the milk microbiota composition was significantly different between the groups divided by the threshold for predicting the LF concentration. Our results indicated that the LF concentration in normal milk may be associated with the milk microbiota composition.     

Effect of oral administration of 3,3',4,4',5-pentachlorobiphyenl on the intestinal microbiota of Sprague–Dawley rats

The effect of the endocrine-disrupting chemical 3,3',4,4',5-pentachlorobiphyenl (PCB 126) on intestinal microbiota after oral administration, and the improvement of intestinal microbiota and feces quantity by the subsequent administration of Lactobacillus acidophilus or Lactobacillus reuteri was investigated. All the rats were given 100 μg/kg bodyweight of PCB 126. The changes in bacterial counts were confirmed using a culture method. The administration of PCB 126 tended to decrease the bacterial counts of lactobacilli (10^9.6−10^10.2 to 10^8.8−10^9.2) and bifidobacteria (10^5.3−10^6.1 to 10^3.6−10^4.2), and to increase those of Enterobacteriaceae (10^8.2−10^9.1 to 10^9.4−10^10.3) and staphylococci (10^6.6−10^7.4 to 10^7.2−10^8.4) compared to no PCB 126 administration. After administration of PCB 126, L. acidophilus or L. reuteri orally administered to rats caused Enterobacteriaceae and staphylococci counts to decrease, suggesting that the intestinal microbiota was improved by the lactobacilli. The administration of L. acidophilus and L. reuteri improved the balance of intestinal microbiota, and defecation volume returned to its normal level. L. acidophilus and L. reuteri have a remedial effect on intestinal microbiota affected by PCB 126 and can function to lessen accumulated PCB 126 volume.     

Performance of coated carbide tools when grooving wood-based materials: effect of work materials and coating materials on the wear resistance of coated carbide tools

This paper presents the performance of coated carbide tools when grooving various density hardboards and wood-chip cement boards. Work materials of low density (about 0.8g/cm³) and high density (about 1.2g/cm³) were tested. The coating materials studied were chromium carbide, titanium carbonitride, and titanium carbide, which were synthesized on P30 carbide substrate using a chemical vapor deposition method; titanium nitride, chromium nitride, and titanium carbonitride were synthesized using the physical vapor deposition method. Cutting tests were performed during grooving at a cutting speed of 1000m/min and a feed rate of 0.1 mm/rev. The results of the study show that the coated carbide tools are more advantageous in reducing the progression of tool wear and retaining lower normal force and noise level when cutting both hardboard and wood-chip cement board of high density than was the uncoated carbide tool. The wear rate of the coated carbide tools for the wood-chip cement board increased more rapidly than that of the hardboard with increasing densities. Though the coated carbide tools suffered more wear with the low-density wood-chip cement board than with hardboard, their normal force and noise level were always lower for the low-density wood-chip cement board.Part of this paper was presented at the 11th Annual Meeting of the Chugoku Shikoku branch of the Japan Wood Research Society, Matsue, Shimane, September 25, 1999     

Effects of chemical treatments on ultra-high-yield pulping 1. Fiber separation

Summary Specially designed wood blocks from Norway spruce were used to study the nature of the fracture surfaces developed in shear using a tensile tester. In the case of the control (water-soaked blocks), the fracture in the latewood takes place mainly in the S₁ layer while in the earlywood the fracture occurs across the double cell wall. After dilute alkali treatment, some earlywood cells also fracture in the S₁ layer. For sulfite-treated samples, on the other hand, both earlywood and latewood fracture in the middle lamella.Financial support from the Empire State Paper Research Associates (ESPRA) is greatly appreciated     

Change in river water chemistry as affected by the confluence of forest drainage water in dairy farming area on Hokkaido Island, Northern Japan

We evaluated i) the difference in river water chemistry between a watershed mainly consisting of pasture and a watershed mainly consisting of forest, and ii) how the chemistry of river draining the pasture is influenced by that of the river draining the forest. We selected one river (designated as the T-river) draining the pasture (3,587 ha), and two rivers draining a forest (738 and 879 ha) in eastern Hokkaido, northern Japan. During higher river flow due to precipitation and thawing, the concentrations of NO ₃ ⁻ , SO ₄ ²⁻ , K⁺, Fe, and Al increased, suggesting the relative importance of the shallow soil layer as their source. On the other hand, Na⁺, Mg²⁺, Ca²⁺, and Si decreased, suggesting the relative importance of the source in a deep soil layer. The concentrations of NO ₃ ⁻ , Cl⁻, SO ₄ ²⁻ , K⁺, Na⁺, Mg²⁺, Ca²⁺, and Fe were higher in the T-river than in the forest drainage waters, suggesting the contribution of the excretion components from the milk cows. The Si concentration exhibited the opposite pattern. The concentrations of NO ₃ ⁻ , Cl⁻, SO ₄ ²⁻ , K⁺, Na⁺, Mg²⁺, Ca²⁺ (p<0.001), and Fe (p<0.05) in the T-river decreased after the confluence of the forest drainage waters, while Si concentration increased (p<0.001). The reason for the change in river chemistry was the confluence of the forest drainage waters. These findings suggested the environmental role of the forest in the dilution of the polluted river. Prof. S. Ohata, and Prof. H. Takeda, Graduate School of Agriculture, Kyoto University, facilitated this study. Prof. T. Sakai, Graduate School of Informatics, Kyoto University, offered this study some convenience. Dr. M. Sakimoto, and Dr. M. Katsuyama, Graduate School of Agriculture, Kyoto University, offered useful advise.     

Volatile organic compounds from wood and their influences on museum artifact materials II: Inference of causal substances of deterioration based on intercomparison of laser Raman spectra of deteriorated products

Volatile organic compounds (VOCs) from wood and their effects on artifacts are of intense interest to museum staff who must strictly manage the preservation environment. In this study, the causal substances of deterioration were inferred by comparison with laser Raman (LR) spectra of deterioration products. The artifact samples were deteriorated using VOCs from woods (WV test), and using specific substances that occur in wood VOCs (SV test). The deteriorated samples were analyzed by LR spectroscopy and the results of the WV and SV tests were compared. Hinokitiol and acetic acid were found to be two of the main causal substances of deterioration in western red cedar. Deterioration of iron and copper by spruce did not appear to be caused by acetic acid, as is generally assumed, but by some other unknown compound(s). Sensitivity to wood-based VOC components depended on the type of artifact. In western red cedar, mitsudasou (litharge) was very sensitive to acetic acid, while other artifacts were sensitive to hinokitiol. The LR method used in this study is very useful for the inference of causal substances of deterioration based on the detection of small amounts of deteriorated products such as those generated by deterioration due to wood VOCs. Part of this article was presented at the 25th Annual Meeting of the Japan Society for the Conservation of Cultural Property, Kyoto, June 2003