Sources and Ecological Risks of Heavy Metals in Soils Under Different Land Uses in Bangladesh

Soil heavy metal pollution, influenced by both natural and anthropogenic factors, significantly reduces environmental quality. In this study, Cr, Ni, Cu, As, Cd, and Pb in eight different land-use soils from Patuakhali District in Bangladesh were assessed. Concentrations of Cr, Ni, Cu, As, Cd, and Pb in soils were 1-87, 5-271, 4-181, 0-80, 0.2-24.0, and 5-276 mg kg^-1, respectively, measured using an inductively coupled plasma-mass spectrometer. The enrichment factor, pollution load index (PLI), and contamination factor (C_fⁱ) of metal i were used to assess the ecological risk posed by metals in soils. The PLI ranged from 0.78 to 2.66, indicating baseline levels to progressive deterioration of soil due to metal contamination. However, C_fⁱ of Cd ranged from 1.8 to 12.0, which showed that the studied soils were strongly impacted by Cd. Considering the severity of the potential ecological risk of a single metal, the descending order was Cd > As > Pb > Cu > Ni > Cr. Soils under all land uses showed moderate to very high potential ecological risk.     

Chemical and organic immobilization treatments for reducing phytoavailability of heavy metals in copper‐mine tailings

This study was conducted to evaluate the efficiency of diammonium phosphate (DAP), agricultural limestone (lime), and green‐waste compost mixed with 30% treated sewage sludge (GCS) applied alone or in combination as chemical immobilization treatment using tomato as a test crop. Mine waste was collected from an abandoned copper‐mine tailing site at Mynydd Parys, Anglesey (UK). Lime was applied at the rate of CaCO₃ equivalent (CCE, pH = 7), DAP at the rate of 23 g P per kg substrate, and 10% by weight, GCS as sole application. Half rate of each amendment was also tested as a combined treatment and an untreated substrate (control). Plant‐available metals (Cd, Cu, Fe, Pb, and Zn) were measured in substrate with conventional diethylenetriaminepentaacetic acid (DTPA) and sequential Ca(NO₃)₂ extraction. Plant–dry biomass yield was significantly (p < 0.001) increased by the combined application of all the three amendments while sole application of DAP reduced yield by 4‐fold compared to unamended soil probably due to P toxicity. Addition of lime reduced the DTPA‐extractable Cu, Fe, and Zn by 75%, 81%, and 85%, respectively, while Pb availability was reduced by 88% in combined DAP + lime + GCS treatment compared to control. The extraction capacity of DTPA was higher than that of Ca(NO₃)₂ by 3‐fold for Cu and Fe, 8‐fold for Pb, and 2‐fold for Zn. The leaf‐tissue concentrations of Cu and Fe were reduced by 77% and 83% in the lime + GCS amendment, respectively, while both Pb and Zn were reduced by 89% and 33%, respectively, in substrate treated with the combined application of all three amendments. These results suggest that alkaline amendments (both lime and GCS) were effective in reducing the phytoavailability of Cu, Fe, and Zn while DAP mixed with either GCS or lime was effective in reducing Pb availability.     

Wide hybridization and introgression breeding in safflower: Effectiveness of different selection methods

Possibility of using interspecific hybridization to increase genetic diversity of drought tolerance in safflower (Carthamus tinctorius L.) and effectiveness of different selection methods is poorly understood. The main objectives of this study were to evaluate the effectiveness of (a) interspecific hybridization to expand genetic diversity in safflower for agronomic traits and drought tolerance in advance generations and (b) different selection methods (direct vs. indirect) for improving seed yield. Interspecific hybridizations were performed between species of C. tinctorius × C. palaestinus (TP), C. palaestinus × C. oxyacantha (PO) and C. tinctorius × C. oxyacantha (TO). Based on the field screening of genotypes in F3 generation, four groups of selected genotypes (derived from combination of direct and indirect selection under both drought and normal environments along with selection based on drought tolerance index (STI)) were evaluated in F4 and F5 generations. Indirect selection for seed yield was significantly more efficient than direct selection. Selection in stress environment resulted to more efficiency than selection in normal environment. No significant difference was observed between direct selection and selection based on STI. The result showed that TP was the best population to combine high seed yield and drought tolerance in safflower.     

SnToxA,SnTox1, and SnTox3 originated in Parastagonospora nodorum in the Fertile Crescent

The centre of origin of the globally distributed wheat pathogen Parastagonospora nodorum has remained uncertain because only a small number of isolates from the Fertile Crescent were included in earlier population genetic and phylogeographic studies. We isolated and genetically analysed 193 P. nodorum strains from three naturally infected wheat fields distributed across Iran using 11 neutral microsatellite loci. Compared to previous studies that included populations from North America, Europe, Africa, Australia, and China, the populations from Iran had the highest genetic diversity globally and also exhibited greater population structure over smaller spatial scales, patterns typically associated with the centre of origin of a species. Genes encoding the necrotrophic effectors SnToxA, SnTox1, and SnTox3 were found at a high frequency in the Iranian population. By sequencing 96 randomly chosen Iranian strains, we detected new alleles for all three effector genes. Analysis of allele diversity showed that all three effector genes had higher diversity in Iran than in any population included in previous studies, with Iran acting as a hub for the effector diversity that was found in other global populations. Taken together, these findings support the hypothesis that P. nodorum originated either within or nearby the Fertile Crescent with a genome that already encoded all three necrotrophic effectors during its emergence as a pathogen on wheat. Our findings also suggest that P. nodorum was the original source of the ToxA genes discovered in the wheat pathogens Phaeosphaeria avenaria f. sp. tritici 1, Pyrenophora tritici-repentis, and Bipolaris sorokiniana.     

Phosphorus fractions and dynamics as affected by land-use changes in the Central Mexican highlands

Land-use change from forest to agriculture in the volcanic ash-derived soils of Mexico has increased over recent decades. It is likely that land uses and management practices, particularly fertilizer use have affected phosphorus (P) distribution and availability. The objective of this study was to evaluate the effects of land-use types (native forest and maize mono-cropping), and the related P addition, on the forms and distribution of soil P and their isotopic exchangeability. An Andisol, sampled from a cropping site, along with the contiguous area under native forest was treated with ³²P-labelled potassium phosphate (KH₂³²PO₄). The soil samples were extracted after incubation times of 7, 21, 35 and 49 days. Phosphorus content and ³²P recovery in fractions sequentially extracted were assessed for each incubation time. Total soil P was dominated by inorganic fractions (79 to 86%) in both land-use types. Resin-Pi, bicarbonate extractable inorganic P (Bic-Pi) and sodium hydroxide extractable inorganic P (NaOH_0.1-Pi) were all raised with P addition. However, the proportion of organic P fraction was reduced under cropped soil. The recovery of ³²P in soils with P addition indicates that resin-Pi, Bic-Pi and NaOH_0.1-Pi comprised nearly all the exchangeable P. In native soils with no P addition, more than 19% of the ³²P was recovered in Bic-Po and NaOH_0.1-Po forms. This finding indicates that organic P cycling is crucial when soil Pi reserves are presented in an inadequate amount. Ecologically based management has to be designed for replenishment and succeeding maintenance of soil organic P compounds to increase sustainable agricultural production.     

Predicting adoption of double cropping in paddy fields of northern Iran: a comparison of statistical methods

Factors affecting the adoption of double cropping were explored in rice farms of Fouman County of Guilan Province in northern Iran using artificial neural networks (ANNs), linear discriminant analysis (LDA), and logistic regression (LGR). Eleven factors (age, education, occupation, family size, type of farm ownership, distance to the agricultural service center, attending agricultural extension courses, use of financial resources and bank loans, number of domestic animals, area under cultivation, and social participation) were examined. An additional objective was to compare the ability of the three models in predicting the adoption of double cropping. ANNs showed an overall predictive power of 89.8%. LDA showed an overall predictive power of 83.2%, with seven of the eleven independent variables being effective on the adoption of double cropping. LGR indicated an overall predictive power of 87.6%, with eight of the eleven independent variables being effective on the adoption of double-rice cropping. ANNs showed higher power than LGR and LDA in predicting the adoption of double cropping. Based on all three methods used for analysis, the most important independent variables were social participation and area under cultivation (positive factors) as well as distance to the agricultural service center and family members (negative factors). Establishment of cooperatives or other kinds of farmers’ associations to foster social participation could motivate adoption of double cropping, particularly among small-scale farmers. To increase agricultural services, more local centers should be created in rural areas. The government should promote double cropping through effective incentives and technology transfer to small-scale farmers.     

Spatial and temporal variation in otolith chemistry and its relationship with water chemistry: Stock discrimination of Sperata aor

Long‐whiskered catfish, Sperata aor (Hamilton 1822), is commercially important in food, ornamental and sport fisheries. The fish is mainly caught from the wild populations because its aquaculture practices are not commercialised. Inland fishery in the Ganga basin is mostly unorganised; hence, no published report is available on the trend of S. aor production from the selected habitat. In India, S. aor has been categorised vulnerable mainly due to natural and anthropogenic threats. Otolith chemistry shows variation with changing physico‐chemical conditions of the fish habitat. Therefore, the present study was conducted with the objective to analyse spatio‐temporal variations in water chemistry in relation to environmental factors; relationship between water and otolith chemistry; and spatio‐temporal variations in otolith chemistry to discriminate the stocks of S. aor inhabiting the River Ganga. Most of the element: Ca ratios in water samples did not show significant correlations with environmental factors, viz. temperature and conductivity. Only few element: Ca concentrations in otoliths were positively correlated to their corresponding ratios in the ambient water. In the selected study area, the S. aor populations were discriminated into four stocks possibly because of heterogeneous water chemistry at the sampling sites, and physical barriers. In the present study, otolith chemistry showed relatively low temporal variability as compared to spatial variability; thus, the classification accuracy of individuals to their original populations remained consistent over the selected time period. The findings could be useful in devising scientifically sound management strategies and/or any conservation plans for the vulnerable S. aor populations inhabiting the River Ganga.     

Response of industrial hemp to Salsola kali subsp. tragus densities under organic and conventional fertilisation

A 2-year field study was conducted to determine the effects of different nutrition systems and Salsola kali subsp. tragus densities on industrial hemp yield and its components. Experiments were conducted as a split plot in a randomised complete block design with three replicates. Factors were fertilisation (poultry manure, vermicompost and nitrogen fertiliser) as the main plot and weed density (0, 5, 10, 15 and 20 plants/m²) as the subplot. Results indicated that the maximum number of racemes per plant, seeds per raceme, 1000-seed weight, biomass, grain yield and harvest index (HI) of industrial hemp were obtained using vermicompost and were reduced with nitrogen fertiliser application. All measured properties in hemp plants decreased due to increasing S. kali subsp. tragus density, especially at 15 and 20 plants/m². The most significant reduction in hemp grain yield and its components was observed by increasing weed density with the application of nitrogen fertiliser. The application of vermicompost at high weed densities resulted in greater hemp grain yield and its components compared with nitrogen fertiliser. It is recommended to apply organic fertilisers, especially vermicompost at high S. kali subsp. tragus densities.     

Development and testing of a surface roughness measurement device based on aerial ultrasonic reflections

Paddy and Water Environment - Repairs of concrete irrigation channels in Japan are guided to a large extent by the degree to which their walls have degraded over decades of use. Current methods of...     

Effect of hybrid post treatments on the structural property and water flux of polysulfone hollow fiber membrane

The application of post treatments in preparation of high flux membranes is expanding rapidly. In this work, several hybrid post treatments have been introduced and used for change in the water flux of polysulfone (PSf) hollow fiber membranes. Dry wet spinning method was employed for fabrication of PSf hollow fiber membrane from spinning dope in mass ratio of 15:5:80 of PSf/PVP-K90/NMP. The simultaneous effects of single and hybrid post treatments containing traditional hypochlorite; high pressure injection technique (HPI) of hypochlorite, hot air and hot water treatments on the morphology and water flux of fabricated hollow fibers has been investigated. AFM analysis and image processing of SEM microphotographs of hollow fibers were used for structural studies. The mechanical properties of hollow fibers as well as strain at break and strength also were studied. It was found that the pores size and surface roughness parameter of hollow fiber membranes have been increased after traditional hypochlorite, HPI technique and hot water treatments while decreased when heat treated in air. In general all the employed hybrid post treatments caused to increase in the pores size of hollow fibers although the pores size increase rate in the membranes treated by the hybrid post treatments involving hot air was much lower than the others. The mechanical properties of hollow fibers have been decreased after hybrid and single post treatments containing traditional hypochlorite, HPI technique and hot water treatment while slightly increased after post treatments containing hot air. It was stated that the fabricated PSf hollow fibers were considerably affected by the employed hybrid post treatments. This can be attributed to the combine effects of used post treatments.